Gotek Drives
Showing all 3 results
Greaseweazle V4 USB Floppy Adapter Flux Reader Writer
Greaseweazle v4 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analyzed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE, ...).
Greaseweazle V4 is the latest version, updated for mass production and with the following features:
- Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25" and 8" disk drives
- Integrated power connector for directly powering most 3.5" disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25" drives
- Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8" interface REDWC signal)
- 100% factory tested, and tested again by me before shipping
More information and documentation on the wiki page here:
This listing is for the Greaseweazle V4 device only. And does not include which you will require:
- A disk drive (for example a PC 3.5" or 5.25" drive)
- A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply
Atari ST Gotek Drive, OLED Display and FlashFloppy
Atari ST Gotek drive is a great replacement for your failing Atari ST floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Atari ST floppy drive and replace it with this unit.
You will need a USB memory stick (NOT included) with your loaded .ST files.
Want to know what a Atari ST Gotek drive is checkout this post It mentions Amiga but its no difference if its Amiga, Atari, Amstrad you will see the same benefits.
Floppy Ribbon and Power Extender available as an option (10cm), If your existing ribbon is less than 7cm you may need the extender.
Gotek Drive pre-flashed with FlashFloppy (Generic)
Gotek drive is a inexpensive solution to replace your Commodore Amiga floppy drive (plus many other makes of computers). These are generic units that simply replace your existing floppy drive or put in an external enclosure. The Gotek drive is pre flashed with FlashFloppy which allows it not only to work with the Commodore Amiga, but also Amstrad CPC computers*, Sinclair Spectrum*, Atari and DOS / IBM PC's*
You will need a USB memory stick (NOT included) with your loaded ADF files.
This Gotek drive will work with all Commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
- OLED Display instead of the 3 Digit Display
- Internal Gotek Speaker to hear those floppy sounds!
- Gotek Rotary knob for easily selecting that game, app or demo