A1200 Gotek Drives
Showing all 4 results
Greaseweazle V4 USB Floppy Adapter Flux Reader Writer
Greaseweazle v4 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analyzed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE, ...).
Greaseweazle V4 is the latest version, updated for mass production and with the following features:
- Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25" and 8" disk drives
- Integrated power connector for directly powering most 3.5" disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25" drives
- Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8" interface REDWC signal)
- 100% factory tested, and tested again by me before shipping
More information and documentation on the wiki page here:
This listing is for the Greaseweazle V4 device only. And does not include which you will require:
- A disk drive (for example a PC 3.5" or 5.25" drive)
- A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply
Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive.
These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200.
The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use.
You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
- OpenFlops Gotek Drive
- 3D Printed Amiga 1200 Gotek Mount
- OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:- Can be installed on many different platforms.
- Directly supports a wide range of image formats.
- Flexible track layout for Raw Sector Images.
- Extremely configurable.
- Supports AutoSwap for games with a large number of disks.
- Easily accessible pin headers for connection of a i2c display (either OLED or LCD), rotary encoder (including power).
- Easily-accessible pin header for an external speaker.
- Connected Motor signal.
- Has additional 3.3V, 5V and GND power pins.
External Gotek Drive – All Commodore Amiga Computers
External Gotek Drive (Brand new) in a new full metal enclosure made with strong 2mm thick aluminium metal in a black anodised coating, with plenty of space inside for extra modifications and components.
Fully compatible with all commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
- OLED Display instead of the 3 Digit Display.
- Internal Gotek Speaker to hear those floppy sounds!
- Gotek Rotary knob for easily selecting that game, app or demo.
- For Amiga A500, A500 Plus, A1500 and A2000 a DF0/DF1 Switch can be added (this is a DIY install).
- External Gotek full metal case (new).
- Internal Gotek Drive with 3 Digit Display
- Flashed with latest version of FlashFloppy
- Includes external ribbon from Gotek drive to Amiga External Floppy port (also provides power)
Gotek Drive pre-flashed with FlashFloppy (Generic)
Gotek drive is a inexpensive solution to replace your Commodore Amiga floppy drive (plus many other makes of computers). These are generic units that simply replace your existing floppy drive or put in an external enclosure. The Gotek drive is pre flashed with FlashFloppy which allows it not only to work with the Commodore Amiga, but also Amstrad CPC computers*, Sinclair Spectrum*, Atari and DOS / IBM PC's*
You will need a USB memory stick (NOT included) with your loaded ADF files.
This Gotek drive will work with all Commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
- OLED Display instead of the 3 Digit Display
- Internal Gotek Speaker to hear those floppy sounds!
- Gotek Rotary knob for easily selecting that game, app or demo