Back to Amiga A600
- You cannot add "Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header" to the basket because the product is out of stock.
Amiga 600 Reproduction Box – Wild Weird Wicked
£ 0.00 Inc UK VAT
PRODUCT DISCONTINUED
Amiga 600 reproduction box – Wild Weird Wicked, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original Amiga 600 boxes created by plakativ-druck.ch.
Key features:
- Box is true to the original size and design.
- Including “Innards” for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.
PRODUCT DISCONTINUED
You may also like…
Amiga 600HD Reproduction Box
PRODUCT DISCONTINUED
Amiga 600HD reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600HD. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600HD was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600HD reproduction box and NOT AN ORIGINAL.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600HD computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600HD reproduction box and NOT AN ORIGINAL.
Amiga 600 Case Badge – Vampire
Amiga 600 Case Badge - Vampire brand new, perfect replacement for any A600 case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 600 case!
Commodore Amiga PSU for A600
Commodore Amiga PSU for A600, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga 600 (A600) Reproduction Box
PRODUCT DISCONTINUED
Amiga 600 (A600) reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600 was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Related products
Amiga 600 / 1200 PCMCIA Socket Replacement
Amiga 600/1200 PCMCIA socket replacement service, this service replaces the PCMCIA socket, great if you have a physically broken socket or have bent or missing pins.
External Gotek Drive – All Commodore Amiga Computers
External Gotek Drive (Brand new) in a new full metal enclosure made with strong 2mm thick aluminium metal in a black anodised coating, with plenty of space inside for extra modifications and components.
Fully compatible with all commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
- OLED Display instead of the 3 Digit Display.
- Internal Gotek Speaker to hear those floppy sounds!
- Gotek Rotary knob for easily selecting that game, app or demo.
- For Amiga A500, A500 Plus, A1500 and A2000 a DF0/DF1 Switch can be added (this is a DIY install).
- External Gotek full metal case (new).
- Internal Gotek Drive with 3 Digit Display
- Flashed with latest version of FlashFloppy
- Includes external ribbon from Gotek drive to Amiga External Floppy port (also provides power)
A630 Rev 3 Accelerator 68030 50Mhz inc FPU Amiga A600
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 - synchronous or asynchronous clocking.
- 64MB SDRAM Fast Ram.
- Cooling: Active included.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
- PCB Colour will vary.
A630 Rev 3 Accelerator (Bare board)
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card. designed for the the classic 68030 Motorola processor (NOT INCLUDED) running at 50Mhz and add an additional FPU (NOT INCLUDED). Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU socket for the Motorola MC68030 clocked on 50MHz CPU (CPU NOT INCLUDED)
- FPU socket for the 68882FN40 (FPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- The Oscillator will need some insulation tape put on top to stop the A630 touching it.