- You cannot add "Commodore CDTV PSU Adaptor" to the basket because the product is out of stock.
Amiga ATX PSU Adaptor – A1000, A2000, A3000
PRODUCT DISCONTINUED
Amiga ATX PSU Adaptor which can be used in an ATX tower case or inside an A1000, A1500, A2000, A3000 (Big Box) Amiga, this adapter provides the -5V and ‘Tick’ signal. For the A3000, the FAIL signal is available to use.
This is the highest rated power adapter available, it can safely handle the following power levels:
+5V @ 15A
+12V @ 8A
This yields a system power of 175W.
One DIP switch sets the power switch type, momentary (as used on ATX cases) or latching (as used on original power cases. The other DIP switch sets the ‘Tick’ frequency.
PCB dimensions, 68x41mm
Does not include any ATX PSU.
Designed and built by Ian Stedman
Related products
X-Surf 100 for all Commodore Amigas with Zorro Slots
- 100MBit physical link rate
- Sana-II device for use with OS2.0 up to OS3.9
- Officially supported in the Linux-m68k kernel
- Space- and power-saving design
- Gold plated Zorro contacts and stainless steel metal bracket
- Local expansion port for our high-speed USB module "RapidRoad"
BFG9060 Amiga A4000/A3000 Accelerator (No CPU)
- 68040 running at 25Mhz (our cards are set up for 68060 CPUs ONLY)
- 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.
- 128 MB of DMA Fast RAM.
- Temperature and voltage monitoring via I²C.
- Overclocking capability up to 100 MHz with full 68060 Rev. 6 CPUs ONLY with heatsink and fan (we don't offer support for overclocking or damage).
- Onboard 5V header to connect the optional CPU fan.
Amiga A1000 Motherboard Recapping Service
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using Panasonic/Wurth/KEMET or other tier 1 capacitors.
Greaseweazle V4 USB Floppy Adapter Flux Reader Writer
Greaseweazle v4 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analyzed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE, ...).
Greaseweazle V4 is the latest version, updated for mass production and with the following features:
- Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25" and 8" disk drives
- Integrated power connector for directly powering most 3.5" disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25" drives
- Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8" interface REDWC signal)
- 100% factory tested, and tested again by me before shipping
More information and documentation on the wiki page here:
This listing is for the Greaseweazle V4 device only. And does not include which you will require:
- A disk drive (for example a PC 3.5" or 5.25" drive)
- A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply