Gotek Drive 0.96″ Display Pre-Flashed with FlashFloppy (Generic)

 £ 37.49 Excl. VAT

Gotek Drive 0.96″ Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX.

This is the latest Gotek floppy emulator for retro computers with 3.5″ floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3″ disk drives or old PCs with 5.25″ drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3).

Flashed with current latest FlashFloppy firmware  and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.

Comes complete with Rotary select knob and large 0.96 OLED display screen

 

List of compatible devices:

 

Acorn Archimedes

Acorn BBC Micro

Amstrad CPC

Amstrad PCW

Amstrad PPC

Atari ST

Commodore Amiga

DEC

Dragon

IBM 3174

IBM PC

IBM PS/2

Kaypro

Memotech

MSX

NEC PC-98

Sharp

Sinclair QL

Spectrum

Tandy Color Computer

TI-99/4A

TSC Flex

UKNC, DVK

Akai

E-mu ESI-32

Ensoniq

General Music (GEM)

Korg

Kurzweil

Roland

Sequential Circuits Prophet 3000

Yamaha

 

 

 

You may also like…

Amiga Gotek FlashFloppy OLED Header
Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive. These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200. The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use. You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
  • OpenFlops Gotek Drive
  • 3D Printed Amiga 1200 Gotek Mount
  • OLED Display with 3D Printed Header
[hr]
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek: Further information on what a gotek drive is can be found here    
 £ 37.49 Excl. VAT Purchase
FlashFloppy Gotek OLED Display Header
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive. The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install. What you will receive:
  • 3D Printed Header
  • OLED Display
  • 30cm of cable from the header to the Gotek drive.
 £ 11.66 Excl. VAT Purchase
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600. You will need a USB memory stick (NOT included) with your loaded ADF files.  
 £ 29.16 Excl. VAT Purchase