Back to Amiga A1200

ReAmiga A1200 Refurbished Fully Built

 £ 699.99 Excl. VAT

ReAmiga A1200 Rev 1.5 Refurbishment Service built using an A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John “Chucky” Hertell. and is a full A1200 board with some extras added which include:

  • Composite Video area changed to a new decoder for improved quality.
  • VGA Connector added, VGA monitor needs to support 15Khz!
  • S-Video Connector for S-Video Out
  • Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one
    kickstart and the other bank with another.
  • PCMCIA Reset fix.
  • Optional IRQ7 Switch.
  • Native PAL or NTSC Option (below)
  • Added LED’s for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
  • Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
  • Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
  • 9 Pin Mouse Port
  • Fits in your current metal shielding**

 

This is a build service using a donor board you provide or provide the needed parts to complete the build.

We are able to provide a donor board if required, ask for further details. 

 

Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.

 

* Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts.
** ReAmiga board does not come with any metal shielding.

 

We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unaviable.

 

 

You may also like…

TF1230 Accelerator Amiga 1200 - Terriblefire
TF1230 Amiga Accelerator 128Mb – Terriblefire
TF1230 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
  • 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
  • 128Mb Fast Ram
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
 
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  • Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
 
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
 £ 149.99 Excl. VAT Purchase
A1200 Case Grey - A1200.net
Amiga 1200 Case Brand New Grey
New Official Amiga 1200 cases from A1200.net features and enhancements!/ What's included?
  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case lead by Philippe Lang, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be open up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V2"] [caption id="attachment_18644" align="aligncenter" width="300"]Keyrah V2 Keyrah V2 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V2 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion]   So what are the differences between the original Commodore case and the New A1200 case?
  • The plastic is 100% UV proof to avoid case turning yellow over time.
  • Screw brass inserts in all 6 new screw towers for smooth operations. No more broken plastic clips!
  • Bottom trapdoor offers better cooling with extra vents and 3x rear trapdoors are available: Plain door, VGA hole, DVI hole, perfect for the Re-Amiga
  • Supports for: Raspberry Pi©, MiST© FPGA, Keyrah© V2 keyboard adapter, RapidRoad© DoubleUSB  and Lotharek© HxC Floppy emulator
 £ 132.50 Excl. VAT Purchase
TF1260 TerribleFire A1200 Accelerator
TF1260 TerribleFire A1200 Accelerator with LC060 50MHz CPU
TF1260 Terriblefire A1200 Accelerator with EC 50Mhz CPU which hosts 128Mb Fast Ram, IDE connector. The TF1260 is one of the best 060 accelerators you can purchase for the Amiga 1200 And is the next step up after the TF1230 A1200 Accelerator add-on we sell for those that want that large speed jump. Full specs:
  • MC68LC060 CPU (The CPU has no MMU or FPU)
  • 128MByte of fast-ram.
  • IDE Interface - Driver required - ehide.device
  • Compatible with any A1200 motherboard revision.
  • Fits in your old/new stock A1200 case!!!
  What is Terriblefire? Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:
  • TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
  • TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
  • TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
  • TF360 - 68060 Processor other specs TBC for the Amiga CD32
  • TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
  • TF1230 - 68030 Processor 64Mb Ram and IDE interface for the Amiga 1200
  • TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
  • TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
  NOTES:
  • For every TF1260 sold we donate a percentage of the sale to Stephen Leary to support further TF card developments and we also support our builders.
  • Timing fix is recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • At least Kickstart 3.1 is required - (Kickstart 3.0 is not supported)
 
 £ 249.99 Excl. VAT Purchase