Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600. You will need a USB memory stick (NOT included) with your loaded ADF files.  
 £ 29.16 Excl. VAT Purchase
Amiga 4000 Real Time Clock Service (RTC)
Amiga 4000 Real Time Clock Service (RTC)
What is RTC service? This service replaces 11 key components within the RTC circuit and around that could be affected by leaking battery these include: 1 x U891 - This IC is part of the fastram circuit and could be damaged by battery leakage. 1 x U178 Timer IC + socket 2 x U975,U976   1 x RP176 resistor network 1 x U177 1 x Diode for RTC reverse voltage protection 1 x battery kit PCB 1 x battery protection diode SMD 1 x battery holder 1 x CR2032 3V Lithium battery NOTE: This service is for Amiga 4000's that work, but have a working RTC circuit or has corrosion around this area that needs to be cleaned up.
 £ 49.99 Excl. VAT Purchase
Amiga 3000 Recap
Amiga 3000 Recapping Service (Standard)
Amiga 3000 capacitor replacement service, all board revisions, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using quality capacitors.
  • Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present)
  Please send motherboard with daughter board.  
 £ 54.16 Excl. VAT Purchase
A630 REV3 Amiga A600 Accelerator 68030 - FPU - 64Mb - Purple Edition
A630 Rev 3 Accelerator 68030 50Mhz inc FPU Amiga A600 PURPLE
A630 Rev 3 68030 50Mhz inc FPU Amiga A600 PURPLE EDITION is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit. Full specs:
  • CPU MC68030, clocked on 50MHz.
  • FPU 68882FN40 - synchronous or asynchronous clocking.
  • 64MB SDRAM Fast Ram.
  • Cooling: Active included.
  • PCMCIA Friendly.
  • PCB Colour - Purple
 
Important Information:
 
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2   Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  • An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here    
 £ 191.66 Excl. VAT Purchase
Intel Pentium III PC Case Badge Black
3DFX PC Case Badge Black
3DFX PC Case Badge Black, perfect for any PC case, add a touch of nostalgia from a great 3DFX era in PC history. These badges are printed on high quality white vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.  
 £ 2.08 Excl. VAT Purchase
Atari External PSU 520ST 260ST
Atari ST PSU for Atari 520ST & 260ST
Atari ST PSU is a 50W strong, modern replacement power supply unit for Atari 520ST and 260ST computer systems using external power supply. PSU provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic Atari ST external PSU replacement on the market. Can be upgraded to adjustable version offering 5VDC voltage fine tuning to set exact 5VDC for your particular system. The one and only absolute industry standard using the Mean-Well's RPT-60B as a base component.
Key features:
  • ATARI 520ST, 520ST+, 260ST, 260ST+ compatible
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with round DIN 7-pin female plug
  • Detachable input AC cable for all versions
  • Weight only 0.4 KG (2x less than original Atari ST PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.  
 £ 41.66 Excl. VAT Purchase
Ramixx500 A500 Plus
Amiga 500 Plus Mainboard Remake Ramixx500 Fully Built
Amiga 500 Plus mainboard remake AKA Ramixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Ramixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested. The Ramixx500 board has had a few improvements added compared to the original A500 Plus board:
  • Kickstart Switches - You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
  • DF0 Switch - Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!
  This is a fully built A500 Plus Ramixx500 board with all the custom chips and is plug and play, simply add your own kickstart rom or add one of the options below.   What's included?
  • Ramixx500 fully populated motherboard
  What's not included?
  • Both bottom and top shield
  • Kickstart Rom
  • Screws/Hex Screws
  33% deposit required - Rest on completion.  
 £ 649.99 Excl. VAT Purchase
Commodore Amiga PSU Duo Plus
Commodore Amiga PSU for 1 x A500/600/1200 1 x CD32/A590 (DUO PLUS EDITION)
Commodore Amiga PSU DUO EDITION PLUS for 1 x A500/600/1200 and 1 x CD32/A590 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel for regular and accelerated Commodore Amiga A500, A500+, A600 and A1200. The new Amiga PSU DUO PLUS Edition is a modern, 65W strong replacement power supply unit for the Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
  • Stabilized +12VDC up to 1.0A rated output (per channel)
  • Stabilized -12VDC up to 0.15A rated output (per channel)
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
  • Double over current protection for all output lines
  • Main AC power On/Off switch
  • Two channel On/Off switches
  • Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
  • Eco friendly, green design: consumes ~20% less power compared to original PSU set
  • Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
  • Detachable AC cable (allowing you to use your own desired cable length).
  • Weight only 0.3 KG
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 120.83 Excl. VAT Purchase
TF1230 A1200 Accelerator - No CPU
TF1230 A1200 Accelerator – NO CPU
TF1230 A1200 Accelerator (NO CPU) for the Amiga 1200 which hosts 64mb of fast ram and built in IDE port. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference. Full specs:
  • 128pin PGA socket ready for a genuine 68030 Gold Top CPU - MC68030RC50B (CPU NOT INCLUDED)
  • 64MByte of fast-ram.
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  What is TerribleFire? Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:
  • TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
  • TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
  • TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
  • TF360 - 68060 Processor other specs TBC for the Amiga CD32
  • TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
  • TF1260 - 68060 Processor, 64Mb Ram and IDE Interface for the Amiga 1200
  • TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
  • TF1200 -  Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
 £ 124.99 Excl. VAT Purchase
Sinclair Spectrum Recapping Service
Sinclair ZX Spectrum 128k +2 +3 Recapping Service
Sinclair ZX Spectrum recapping service, the following models are covered using this service:
  • Sinclair ZX Spectrum 128K +2 +3
  • Sinclair ZX Spectrum 128K (toaster)
This is not a repair service but a maintenance service and boards should be in working order. What's included?
  • Check of the board before recapping is begun.
  • Removal of existing capacitors (radial capacitors).
  • Cleanup and preparation of area.
  • Replace using tier one capacitors.
  • Retest (Video, Audio)
  Whole units can be sent (no need to send just the motherboard).
 £ 27.49 Excl. VAT Purchase
Sinclair Spectrum Recapping Service
Sinclair ZX Spectrum 16K/48K Recapping Service
Sinclair ZX Spectrum recapping service, the following models are covered using this service:
  • Sinclair ZX Spectrum 48k
  • Sinclair ZX Spectrum+ (Plus)
This is not a repair service but a maintenance service and boards should be in working order. What's included?
  • Check of the board before recapping is begun.
  • Removal of existing capacitors (radial capacitors).
  • Cleanup and preparation of area.
  • Replace using tier one capacitors.
  • Retest (Video, Audio)
  Whole units can be sent (no need to send just the motherboard).
 £ 24.99 Excl. VAT Purchase
Amiga A500 Cartoon Classics Reproduction Box
Amiga 500 Reproduction Box Cartoon Classics
Amiga 500 reproduction box - Cartoon Classics, these are brand new and designed to be used as box art or to house your Amiga A500. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 500 was shipped.
Key features:
  • Box is true to the original size and design.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.

We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 500 reproduction box and NOT AN ORIGINAL.  
 £ 33.33 Excl. VAT Purchase