Amiga 500 Plus
Showing all 5 results
Amiga 500 or 500 Plus Gotek OLED Display and FlashFloppy
Amiga 500 Gotek unit is a great replacement for your failing Amiga 500 or Amiga 500 Plus floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 2 new screws will also be supplied to secure it to the Amiga 500.
You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below.
This Gotek will fit:
- Amiga A500
- Amiga A500 Plus
What are Amiga ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF’s are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene). Want to know what a gotek drive is checkout this post
Amiga A500 Recapping Service
Amiga A500 recapping service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot.
Amiga A500 Plus Recapping Service
Amiga A500 Plus recapping service, all board revisions, NOTE this is NOT a repair service, the Amiga A500 Plus needs to be in working order.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot.
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector.
The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz.
ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector.
What's included:
- ScanPlus ECS .
- VGA breakout socket.
- Ribbon cable to connect to VGA socket.
- Item is brand new.
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
Amiga 500 Plus Mainboard Remake Ramixx500 Fully Built
Amiga 500 Plus mainboard remake AKA Ramixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Ramixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested.
The Ramixx500 board has had a few improvements added compared to the original A500 Plus board:
- Kickstart Switches - You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
- DF0 Switch - Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!
- Ramixx500 fully populated motherboard
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws