Services

Showing 1–12 of 93 results

Amiga OS 3.2
AmigaOS 3.2 CD-ROM Package for ALL Commodore Amiga’s
AmigaOS 3.2 CD-ROM for all Commodore Amiga's which includes:
  • A500 / A500 Plus
  • A600
  • A1000
  • A1200
  • A2000 / A1500
  • A3000 / A3000T
  • A4000 / A4000T
  • CDTV*
  • Amiga CD32*
AmigaOS 3.2 CD-Rom contains all disks and AmigaOS Kickstart ROMs so these can be transferred to real floppy disks or Gotek drives. The kickstarts can be used in any emulation environment like WINUAE or if your accelerator card has a MapRom feature, the kickstart Roms can be used with that function also. We also offer burning of AmigaOS 3.2 kickstart's to EPROMS if you want physical kickstart roms. This allows the Amiga user to install AmigaOS 3.2 on many different Amigas at the same time without having to purchasing any additional licences. AmigaOS 3.2 CD-ROM contents can be copied "as is" to an Amiga formatted hard drive and booted right away for installation thanks to the "Amiga Preinstallation Environment" (AmigaPE), we also offer pre-installed CF Cards. This is truly the ultimate package!

Some of AmigaOS 3.2 features

  • ReAction GUI toolkit integration
  • Built-in ADF (Amiga disk file image) management
  • Integrated Help subsystem
  • Updated Data Type system
  • Workbench and other user interface improvements
  • Improved Tools, Utilities and System applications
  • Enhanced Shell behavior
  • New and reworked command set
  • Touched up Preferences
  • Polished MultiView
  • Revamped Commodities
  • Expanded BootMenu
  • Inclusion and refinement of the AmigaOS 3.1.4 feature set
  • Flexible delivery media
  • Many more features to be listed

Minimum hardware requirements

  • Kickstart ROM 3.2 (recommended), 3.1.4 , or older 3.1
  • 2 MB of total memory. Total memory is calculated by adding Chip RAM and Fast RAM. Consider an additional half megabyte if you are not using a physical Kickstart ROM 3.2.
  • 10 MB of free hard disk space.
We are proud to be an official Hyperion reseller.   *Experimental
£33.33 Excl. VAT Select options
Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 recapping service (Premium) using hybrid polymer capacitors (never leak again!), all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either polymer Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
£45.83 Excl. VAT Select options
Amiga 600 recapped polymer capacitors
Amiga A600 Recapping Service (PREMIUM)
Amiga A600 recapping service (Premium) using hybrid polymer capacitors (these never leak again!), all board revisions. NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either Panasonic/Wurth/KEMET polymer capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
£45.83 Excl. VAT Select options
Amiga 1200 Mainboard recapped
Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back).
  • Removal of existing electrolytic capacitors.
  • Cleanup and preparation of area.
  • Replace using either Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
£29.16 Excl. VAT Select options
Amiga 600 Recapped
Amiga A600 Recapping Service (Standard)
Amiga A600 Recapping Service. All board revisions (1.1,1.3,1.5,2B,2D). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.    
£29.16 Excl. VAT Select options
Amiga 1200 Gotek, FlashFloppy, 3D Printed Mount
Amiga 500 or 500 Plus Gotek OLED Display and FlashFloppy
Amiga 500 Gotek unit is a great replacement for your failing Amiga 500 or Amiga 500 Plus floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 2 new screws will also be supplied to secure it to the Amiga 500. You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below. This Gotek will fit:
  • Amiga A500
  • Amiga A500 Plus

What are Amiga ADF files?

ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF’s are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).   Want to know what a gotek drive is checkout this post
£28.33 Excl. VAT Select options
Refurbished Amiga 1200 - AmigaPassion
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 28/35 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]   Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping Worldwide shipping available simply contact us for a shipping quote.    

Images of the Amiga 1200 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.

 

As these are custom built they can take between 28/35 working days depending on what add-ons are added and workload. So please do not order if you are not able to wait. 

   
£394.99 Excl. VAT Select options
Amiga CD32 Recapping Service (PREMIUM)
Amiga CD32 Recapping Service (PREMIUM)
Amiga CD32 recapping service using polymer capacitors (these never leak again!), all board revisions. NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors. NOTE: Rev 3 board capacitors C408 and C411 installed correctly.
  • Retest (Video, Audio).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
£49.99 Excl. VAT Select options
Amiga 1200 Gotek, FlashFloppy, 3D Printed Mount
Amiga 600 Gotek Drive, Printed Mount, OLED Display and FlashFloppy
Amiga 600 Gotek drive is a great replacement for your failing Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga. You will need a USB memory stick (NOT included) with your loaded ADF files.
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
£28.33 Excl. VAT Add to basket
Amiga 1200 Mainboard Recapped with modulator removed
Amiga 1200 Recapping, Modulator, Timing Fix (Standard)
Amiga 1200 capacitor replacement service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using quality Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot)
  • FREE return postage of your recapped board.
 
£37.00 Excl. VAT Add to basket
SMD Capacitors Amiga CD32
Amiga CD32 Recapping Service (Standard)
Amiga CD32 recapping service, all board revisions (Rev 3 & 4). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors. NOTE: Rev 3 board capacitors C408 and C411 installed correctly.
  • Retest (Video, Audio).
£33.33 Excl. VAT Select options
ScanPlus AGA Amiga 1200/4000D
ScanPlus AGA – Amiga 1200 and Amiga 4000D Scandoubler

NO LONGER AVAILABLE

ScanPlus AGA is a internal Scandoubler for the Amiga 1200 and Amiga 4000D (not Amiga 4000T or Amiga CD32). The advantage of the internal ScanPlus AGA is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector. The primary PCB sits over the Lisa chip and the smaller PCB sits over the Alice chip. Output connector connects to a VGA socket which sits in a 3D printed backplate which is included (available in white or black, please note white will be sent if no note is made asking for black). ScanPlus is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector, these include Multiscan, PAL, NTSC, DoublePAL DoubleNTSC, Euro36, Euro72, Super72. It provides smooth 50-60 Hz and up to 24 bit colour depth. What's included:
  • ScanPlus AGA (Lisa and Alice PCB's).
  • VGA breakout socket.
  • White Backplate for VGA socket (please but a note on the order to ask for Black if required instead).
  • Ribbon cable to connect to VGA socket.
  • Link cable to Alice PCB.
  • DPMS screensaver utility included - Download here
  • Item is brand new.
  • Installation guide is here
 

Note:

  • Not retail boxed.
  • Requires some knowledge of Amiga hardware when installing, fitting service avilable if required, ask for details.
£91.67 Excl. VAT Read more