Back to Modifications
Amiga 500 Composite S-Video Modification
Amiga 500 Composite S-Video Modification
Amiga 500 Composite S-Video Modification
Amiga 500 Composite S-Video Modification

Amiga A500 Plus Composite/S-Video Output Module

£41.66 Ex. VAT

Amiga A500 Plus Composite/S-Video output module provides both Composite and and S-Video output via a extra PCB. This service provides the Composite/S-Video module and installation to your Amiga 500 Plus.

Installation does require the whole bottom half of the Amiga A500 Plus so the Composite/S-Video module can be installed.

What are the benefits of the Composite/S-Video module?

  • No need for the large modulator sticking out of the back of the Amiga A500 Plus.
  • Provides true composite video signal as the signal is directly from the RGB outputs.
  • Provides true S-Video video signal as again is directly from the RGB outputs.
  • Neat internal solution that provides both composite phono port and S-Video port (case modification is required and included in the service).

This service takes into account the whole bottom half of the Amiga A500 Plus will be sent. Return UK shipping will be via Parcel Force and calculated at the checkout. £100 shipping insurance is included in the base price. Extra insurance can be added via the options below.

 

OUT OF STOCK

SKU: 1001111111111-1 Category: Tags: , ,

Related products

Amiga A500 Custom Black & White
Refurbished Commodore Amiga 500 Custom

Commodore Amiga A500 – Professionally Refurbished White Edition

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU.
  • 1Mb Ram (512k slow, 512k fast).
  • 1.3 Kickstart Rom.
  • Internal Gotek Drive with side OLED display
What’s included?
  • Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
  • Brand new A500 Case White
  • Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished? Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want to add some upgrades? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Worldwide shipping available simply contact us for a shipping quote.    Buildtime 4-6 weeks (Keycaps are on thier way to us).  
£399.99 Ex. VAT Select options
PiStorm Amiga A500 Adaptor
PiStorm Adaptor Amiga A500 – A500 Plus
PiStorm Adaptor is designed to connect to the Raspberry Pi 3A + (not included but available as an option below). Placed in the DIP64 (CPU) socket of your Amiga A500, A500 Plus or A2000 in conjunction with the Raspberry Pi, it can emulate the operation of the 68020/68030/68040 processor. The software running on PiOS greatly extends the functionality of the Amiga - adding FAST memory, RTG (graphics card) and a network card. PiStorm is designed for Amiga computers (A500 / A500 Plus / A1500 / A2000), but should work with any 16-bit computer equipped with a 68000 CPU socket (FC adapter lines are not currently used / supported by firmware and cannot be guaranteed to work properly on systems with use them). Overall performance with the current use of "Musashi" as a 68k processor emulator is around 70-80 MHz 68030. This adapter requires:
  • Raspberry Pi model 3A
  • 32Gb SD Card configured to boot in to WB
All available as an option below Want to know more about the PiStorm check out the following link: https://github.com/captain-amygdala/pistorm
  NOTE: This is a community project and will require some knowledge Amiga. We DO NOT provide any support for getting this product running, but support is available via the following Discord channel https://discord.com/invite/j6rPtzxaNW Also this product is still in BETA and while compatibility is very high, updates are always being released to increase compatibility with software and games. We do sell refurbished Amiga A500 and A500 Plus's which can have a PiStorm installed tested and running. Also we can add a PiStorm installation as part of any Amiga A500 or A500 Plus Service. We support developers and a percentage of the purchase price of the PiStorm adaptor is given to Claude Schwarz  The PiStorm adaptors are professionally manufacture and are RoHS compliant.  
£41.66 Ex. VAT Select options
Refurbished Amiga A500
Refurbished Commodore Amiga 500 PLUS

Commodore Amiga 500 PLUS – Professionally refurbished

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Rom
  • 3.5" Floppy Drive
  • UK Layout Keyboard
What’s included?
  • Professionally refurbished Amiga 500 + (PLUS) Unit (excluding mouse and PSU), these are options that can be added at the end.
  What is Refurbished? Each Commodore Amiga 500 + (PLUS) mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 + (PLUS) worked as it did when it first came from the factory back in the 1980’s. Case and keyboard is stripped and cleaned but due to age may show signs of use and age.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want up add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc. if there is something else or would like to add any mods let us know!   Shipping UK shipping will be via Parcelforce and shipping cost will be calculated the checkout. Worldwide shipping available simply contact us for a shipping quote.   Images of the Amiga 500 + (PLUS) is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 + (PLUS) we have please contact us.  
£399.99 Ex. VAT Select options
ACE2b A500 A2000 2Mb Chip Ram Upgrade
ACE2b Amiga A500 A2000 2Mb Chipram Upgrade

ACE2b Amiga Chipram Extender 2MBytes. It is installed in the socket of the Fat Agnus chip of your OCS/ECS Amiga. It is compatible with these Amiga models:

  • A500 up to board rev. 7
  • A1500 and A2000, Rev. 4.1 and higher
  • CDTV
  • A2500 Rev. 4.1 and higher
The unit requires no soldering, but does require the removal of the existing AGNUS chip from the motherboard. The ACE2b then simply slots in to the existing AGNUS socket and the GARY adapter is socketed between the GARY socket and the GARY chip. The ACE2b is jumpeless and does not rely on existing memory to be present so no ram is required in the trapdoor of the A500 as the ACE2b has the full 2Mb Chipram is located on the PCB itself, the chip ram on the main board of your Amiga will not be used any more. ACE2b uses an ECS Agnus 8375 (included) that is switchable between PAL and NTSC video mode by software. It is compatible with Genlock interfaces. ACE2b starts up in NTSC mode. If you own an ACA500 or ACA500plus, you can fix the video mode to your preferred setting.   What's included:
  • ACE2b PCB with Gary Adaptor
  • 8375 2Mb Agnus PLCC
  We do offer an installation service, by all means contact us.    
£158.33 Ex. VAT Add to basket