Back to ZX Spectrum Upgrades
ZX Spectrum +3 Gotek Driv

ZX Spectrum 128K +3 Gotek Drive, OLED Display, FlashFloppy

£41.66 Ex. VAT

ZX Spectrum 128 +3 Gotek Drive is a great replacement for your failing ZX Spectrum 128 +3 3″ floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy. installation is simple, you simply remove your existing floppy drive and replace it with this unit, the Gotek drive also comes with the correct interface cable and modified power lead. You will need a USB memory stick (NOT included) with your loaded DSK files but we offer an option for a pre-configured USB stick below.

What’s included?
  • ZX Spectrum 128 +3 Gotek Drive and mount.
  • Modified Ribbon Cable.
  • Modified Power Cable.
What are DSK files?

DSK files is the standard ZX Spectrum 128 +3 disk images (including Amstrad CPC 6128) for floppy disk images. No different to Sega or Nintendo roms, DSK files are images of ZX Spectrum 128 +3 games and programs. Not only could you have access to a huge back catalogue of retro ZX Spectrum 128 +3 games and programs, but there are still brand new games being released today, for example: Captain Gopher or  Bullet Storm.

What are gotek drives in detail? Read here

What is FlashFloppy check out this link

OUT OF STOCK

SKU: ZX-GT-OL Categories: , Tags: , , , ,

Related products

ZX Spectrum PSU for Sinclair ZX Spectrum +2A, +2B, +3
ZX Spectrum PSU for +2A, +2B, +3 NEW
ZX Spectrum PSU for +2A, +2B, +3 is a modern, 50W strong, replacement power supply unit. It provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic ZX Spectrum +2A PSU or ZX Spectrum +3 PSU replacement on the market. The one and only absolute industry standard using the Mean-Well's RPT-60B as a base component,
Key features:
  • ZX Spectrum +2A, +2B, +3 compatible
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with round DIN 6-pin plug
  • Detachable input AC cable for all versions
  • Weight only 0.4 KG (4x less than original transformer based PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£41.66 Ex. VAT Add to basket
FlashFloppy Gotek OLED Display Header
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive. The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install. What you will receive:
  • 3D Printed Header
  • OLED Display
  • 30cm of cable from the header to the Gotek drive.
£11.66 Ex. VAT Read more
ACE2b A500 A2000 2Mb Chip Ram Upgrade
ACE2b Amiga A500 A2000 2Mb Chipram Upgrade

ACE2b Amiga Chipram Extender 2MBytes. It is installed in the socket of the Fat Agnus chip of your OCS/ECS Amiga. It is compatible with these Amiga models:

  • A500 up to board rev. 7
  • A1500 and A2000, Rev. 4.1 and higher
  • CDTV
  • A2500 Rev. 4.1 and higher
The unit requires no soldering, but does require the removal of the existing AGNUS chip from the motherboard. The ACE2b then simply slots in to the existing AGNUS socket and the GARY adapter is socketed between the GARY socket and the GARY chip. The ACE2b is jumpeless and does not rely on existing memory to be present so no ram is required in the trapdoor of the A500 as the ACE2b has the full 2Mb Chipram is located on the PCB itself, the chip ram on the main board of your Amiga will not be used any more. ACE2b uses an ECS Agnus 8375 (included) that is switchable between PAL and NTSC video mode by software. It is compatible with Genlock interfaces. ACE2b starts up in NTSC mode. If you own an ACA500 or ACA500plus, you can fix the video mode to your preferred setting.   What's included:
  • ACE2b PCB with Gary Adaptor
  • 8375 2Mb Agnus PLCC
  We do offer an installation service, by all means contact us.    
£158.33 Ex. VAT Add to basket
Amiga 1200 Gotek, FlashFloppy, 3D Printed Mount
Amiga 500 or 500 Plus Gotek OLED Display and FlashFloppy
Amiga 500 Gotek unit is a great replacement for your failing Amiga 500 or Amiga 500 Plus floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 2 new screws will also be supplied to secure it to the Amiga 500. You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below. This Gotek will fit:
  • Amiga A500
  • Amiga A500 Plus

What are Amiga ADF files?

ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF’s are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).   Want to know what a gotek drive is checkout this post
£33.33 Ex. VAT Read more