Amiga A4000

Showing 13–23 of 23 results

Amiga 4000 Real Time Clock Service (RTC)
Amiga 4000 Real Time Clock Service (RTC)
What is RTC service? This service replaces 11 key components within the RTC circuit and around that could be affected by leaking battery these include: 1 x U891 - This IC is part of the fastram circuit and could be damaged by battery leakage. 1 x U178 Timer IC + socket 2 x U975,U976   1 x RP176 resistor network 1 x U177 1 x Diode for RTC reverse voltage protection 1 x battery kit PCB 1 x battery protection diode SMD 1 x battery holder 1 x CR2032 3V Lithium battery NOTE: This service is for Amiga 4000's that work, but have a working RTC circuit or has corrosion around this area that needs to be cleaned up.
 £ 49.99 Excl. VAT Purchase
Keyrah V3 for Commodore Amiga, Atari ST & PC
Keyrah V3 – Commodore Amiga, Atari ST, PC
Keyrah V3 allows you to connect original keyboards of classic computer systems like the Commodore 64 or the Amiga 1200 to modern computers (e.g. PC, Mac, or the Raspberry Pi) via USB. It also supports digital joysticks and analogue paddles of such classic systems, which will be converted to standard HID game controllers. Supported systems with this model are:
  • Commodore C64 (all models)
  • Commodore SX-64
  • Commodore VIC-20 (VC20)
  • Commodore C16
  • Commodore C128D
  • Amiga 1200
  • Amiga 600
  • Amiga 500
  • Amiga 4000/CDTV
  • Atari ST (8-pin connector only)
  • PC XT / PC AT (with PS/2 adapter)
The following systems can be made compatible by mounting additional connectors on the circuit board or using adapters:
  • Commodore C128
  • Commodore C116
  • Commodore plus/4
  • Commodore PET (8296)
  • Commodore CBM2 (B-Series)
  • Amiga 2000/3000 (with PS2 adapter)
Keyrah V3's switch allows you to switch between the standard and a keymap that's geared towards emulation. This switch looks and feels like the original power switch of the Commodore 64, adding a third switch position that allows you to send an ACPI signal to shut down/power up your computer. To avoid triggering the shutdown procedure by accident, this third position is not locked, so the switch will always flip back from it if not held in place. For further safety, the ACPI signal is only sent to the computer after being held in this position for five seconds. The box includes the Keyrah V3 circuit board and a printed manual. USB cable is not included. PCB colour will vary.
 £ 47.49 Excl. VAT Purchase
Amiga 4000 Recapped Board
Amiga A4000 Recapping Service (Standard)
Amiga A4000 recapping service, all board revisions, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
 £ 34.99 Excl. VAT Purchase
Gotek Drive Generic Large Display and Rotary Knob
Gotek Drive 0.96″ Display Pre-Flashed with FlashFloppy (Generic)
Gotek Drive 0.96" Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX. This is the latest Gotek floppy emulator for retro computers with 3.5" floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3" disk drives or old PCs with 5.25" drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3). Flashed with current latest FlashFloppy firmware  and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive. Comes complete with Rotary select knob and large 0.96 OLED display screen   List of compatible devices:   [accordion] [pane title="Computers"] Acorn Archimedes Acorn BBC Micro Amstrad CPC Amstrad PCW Amstrad PPC Atari ST Commodore Amiga DEC Dragon IBM 3174 IBM PC IBM PS/2 Kaypro Memotech MSX NEC PC-98 Sharp Sinclair QL Spectrum Tandy Color Computer TI-99/4A TSC Flex UKNC, DVK [/pane] [pane title="Electronic Synthesizers"] Akai E-mu ESI-32 Ensoniq General Music (GEM) Korg Kurzweil Roland Sequential Circuits Prophet 3000 Yamaha[/pane] [pane title="Embedded & Industrial"] KUKA [/pane] [/accordion]      
 £ 37.49 Excl. VAT Purchase
Amiga A4000D Replica Part Built Birdseed Only
Amiga A4000D Replica Motherboard Part Built (birdseed only)
Amiga A4000D replica motherboard which has been part built with all the 'birdseed' components soldered in place which are SMD ceramic resistors and capacitors ONLY. These boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community. What's included:
  • Amiga A4000D Replica PCB in Black
  • All SMD ceramic capacitors and resistors soldered
  You will need to source further parts to make this a functional motherboard.   We also offer a fully built A4000D Motherboard here
 £ 99.99 Excl. VAT Purchase
Amiga A4000 PSU Recapping Service
Amiga A4000 PSU Recapping Service
Amiga A4000 PSU recapping service - NOTE this is NOT a repair service.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Test output voltages (not under load)
Recapping the Amiga A4000 PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on. All that needs to be sent is the Amiga 4000 PSU itself.
 £ 29.16 Excl. VAT Purchase
72-Pin Simm Socket/Slot – Amiga 4000
72-Pin Simm Socket/Slot – Amiga 4000
72 Pin Simm Socket/Slot replacement for the Amiga 4000 Desktop These are brand new and are the correct socket for the Commodore Amiga 4000 Desktop or the Amiga 4000 Replica project. Specifications
  • Pitch: 1.27 mm
  • Termination Style: Through Hole
  • Contact Plating: Tin
  • Mounting Angle: 22 deg
We also offer 72 Pin Simm Socket replacement service here     
 £ 16.66 Excl. VAT Purchase
BigRamPlus 256Mb Commodore Amiga
BigRamPlus 256Mb for Amiga A3000 A3000T A4000 & A4000T
BigRamPlus is a 256 MByte memory expansion for any Amiga with Zorro-III slots, i.e. Amiga 3000, Amiga 3000T, Amiga 4000 and Amiga 4000T. BigRamPlus is only guaranteed to work with the original daughter boards of these computers. It may or may not work properly with third party bus boards made by Micronik, RBM, Eagle, Elbox, etc. Memory is used by all operating systems up to OS3.9 automatically. Linux/BSD may need special patches to use this memory. AmigaOS 4.0 does not permit the use of a Z3 memory card, the computer won't even boot into the OS. AmigaOS 4.1 can use the card's memory as swap memory. Starting with OS4.1FE, update#1, this memory can be used as main memory. Box contents:
  • BigRamPlus card
  • Instruction sheet
You will need in addition to that:
  • A computer with Z3 slots (Z2 will not work!)
  • A screwdriver to open your computer
 
 £ 104.16 Excl. VAT Purchase
X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots
X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2. Key features:
  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module "RapidRoad"
Drivers can be downloaded from here. Manual here Wiki here Requirements:
  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga
Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don't allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking. Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used. Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the "swap" jumper. The X-Surf-100 is officially supported in the Linux-m68k kernel.    
 £ 110.83 Excl. VAT Purchase
Amiga A4000 Reproduction Box
Amiga A4000 Reproduction Box
Amiga A4000 reproduction box - These are brand new and designed to be used as box art or to house your Amiga 4000 including keyboard and accessories. These are true reproductions of the original boxes created by plakativ-druck.ch used when the A4000 was shipped.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Amiga A4000 computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga A4000 reproduction box and NOT AN ORIGINAL.
 £ 70.83 Excl. VAT Purchase
Amiga 4000T Recapped Mainboard
Amiga 4000T Recapping Service
Amiga 4000T recapping service including Video/Audio, IO, SCSI Modules, Rev 4, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
 
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
 £ 49.99 Excl. VAT Purchase