Back to Amiga 1200 Cases
TF1200 A1200 Case Badge TF1230

Amiga A1200 Case Badge – TF1200

£4.16 Ex. VAT

Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!

OUT OF STOCK

SKU: A1200-badge-TF1200 Category: Tags: , , ,

Related products

ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
  • Composite Video area changed to a new decoder for improved quality.
  • VGA Connector added, VGA monitor needs to support 15Khz!
  • S-Video Connector for S-Video Out
  • Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
  • PCMCIA Reset fix.
  • Optional IRQ7 Switch.
  • Native PAL or NTSC Option (below)
  • Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
  • Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
  • Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
  • 9 Pin Mouse Port
  • Fits in your current metal shielding**
  • WHITE PCB ONLY
  This is a build service using a donor board you provide or provide the needed parts to complete the build. We are able to provide a donor board if required, ask for further details.    Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.   * Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts. ** ReAmiga board does not come with any metal shielding.   
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.
   
£699.99 Ex. VAT Add to basket
TF1230 Accelerator Amiga 1200 - Terriblefire
TF1232 Amiga Accelerator 64Mb
TF1232 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
  • 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
  • 64Mb Fast Ram
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
 
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  • Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
 
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
£158.33 Ex. VAT Read more
Refurbished Amiga A1200
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 14/21 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]  
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned
 
Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned
  Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping now July 2024 Shipping Worldwide shipping available simply contact us for a shipping quote.     Important Notes:  
  • Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
  • As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
  • Deposits are not refundable
  • No software warranty or support is provided, any software included is sold as seen.
     
£549.99 Ex. VAT Select options
Amiga A600 Keyboard Membrane
Amiga A600 Keyboard Membrane (New) GREEN
Amiga A600 Keyboard Membrane brand new GREEN. If you have issues with your Amiga A600 keyboard with missing keys or missing rows of keys the chances are the membrane needs replacing. There are 3 types of Mitsumi keyboard membrane for the Amiga A600:
  • The A600 Blue Keyboard Membrane -  available here
  • The A600 Green Keyboard Membrane (model number 56C47A or 56C471A - maybe stamped A300-A)
  • The A600 Green Keyboard Membrane (model number 56C47B or 56C471B - maybe stamped A300-B)
This membrane is compatible with the with all Green A600 membranes, if your current A600 membrane is BLUE these are different and are available to purchase here What if you have missing keys or rows of keys on the Keyboard? Try these possible fixes first:
  • Check the ribbon is inserted all the way in the connector on the Amiga A600 mainboard.
  • If it's only 1 or two keys the plunger may need a clean, strip down the keyboard and clean the plunger with some IPA.
  • If it's a whole row of keys missing its a very strong possibility that the membrane on your needs replacing.
  • The final step is to trim off 1mm of the connector (the ribbon end that plugs into the A600 mainboard).
Do let us know if any of the above fixes help you!    
£24.99 Ex. VAT Read more