You may be interested in…
Commodore Amiga PSU for A600
Commodore Amiga PSU for A600, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
A630 Accelerator Turbo Card A600 Rev 2
A630 Accelerator Turbo Card for the Amiga 600 is a modern turbo card with the classic 68030 Motorola processor running at 50Mhz. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost!
PRODUCT END OF LIFE: Now superseded by the REV 3 version here
Full specs:
- CPU MC68030, clocked on 50MHz.
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
AmigaOS 3.2 CD-ROM Package for ALL Commodore Amigas
AmigaOS 3.2 CD-ROM for all Commodore Amiga's which includes (UPDATED APRIL 2025)
- A500 / A500 Plus
- A600
- A1000
- A1200
- A2000 / A1500
- A3000 / A3000T
- A4000 / A4000T
- CDTV*
Some of AmigaOS 3.2 features
- ReAction GUI toolkit integration
- Built-in ADF (Amiga disk file image) management
- Integrated Help subsystem
- Updated Data Type system
- Workbench and other user interface improvements
- Improved Tools, Utilities and System applications
- Enhanced Shell behavior
- New and reworked command set
- Touched up Preferences
- Polished MultiView
- Revamped Commodities
- Expanded BootMenu
- Inclusion and refinement of the AmigaOS 3.1.4 feature set
- Flexible delivery media
- Many more features to be listed
Minimum hardware requirements
- Kickstart ROM 3.2 (recommended), 3.1.4 , or older 3.1
- 2 MB of total memory. Total memory is calculated by adding Chip RAM and Fast RAM. Consider an additional half megabyte if you are not using a physical Kickstart ROM 3.2.
- 10 MB of free hard disk space.
AmigaOS 3.2.3 (Released April 2025)
AmigaOS 3.2.3 is available free of charge from the Hyperon website for those that have registered their copy of AmigaOS 3.2 via the Hyperon website. Here are the highlights of the new features and fixes of AmigaOS 3.2.3:- ReAction classes have received numerous updates.
- TextEditor now allows users to define a custom menu with macros.
- 12 KB of chip RAM is no longer reserved.
- A new Kickstart 3.2.3 ROM.
- At least 50 other fixes, including updates to DiskDoctor and HDToolbox.