A630 REV 2 Accelerator Turbo Card A600 NO CPU
£83.33 Ex. VAT
A630 Rev 2 Accelerator Turbo Card (NO CPU VERSION) for the Amiga 600 is a modern turbo card allows you to add your own 68030 CPU. We have tested both the Gold top and ceramic versions, however we do recommend a CPU cooler and fan for the ceramic versions. The speed boost is the sweet spot for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost!
Full specs:
- 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib’s for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:
3.1 Kickstart:
http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme
3.2 or 3.2.1
Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.
Notes:
- Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
*2Mb Chip ram is strongly recommended for WHDLoad which is available here
PCB colour will vary.
OUT OF STOCK
You may also like…

Amiga A600 1Mb Chip Ram Memory Expansion

Amiga A600 Recapping Service (PREMIUM)
- Check of the board before recapping is begun (any faults found before recapping will be reported back)
- Removal of existing capacitors (both SMD and radial capacitors).
- Cleanup and preparation of area.
- Replace using either Panasonic/Wurth/KEMET polymer capacitors.
- Retest (Video, Audio, Floppy Boot, CF Card boot).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
AmigaOS 3.2 CD-ROM Package for ALL Commodore Amigas
- A500 / A500 Plus
- A600
- A1000
- A1200
- A2000 / A1500
- A3000 / A3000T
- A4000 / A4000T
- CDTV*
Some of AmigaOS 3.2 features
- ReAction GUI toolkit integration
- Built-in ADF (Amiga disk file image) management
- Integrated Help subsystem
- Updated Data Type system
- Workbench and other user interface improvements
- Improved Tools, Utilities and System applications
- Enhanced Shell behavior
- New and reworked command set
- Touched up Preferences
- Polished MultiView
- Revamped Commodities
- Expanded BootMenu
- Inclusion and refinement of the AmigaOS 3.1.4 feature set
- Flexible delivery media
- Many more features to be listed
Minimum hardware requirements
- Kickstart ROM 3.2 (recommended), 3.1.4 , or older 3.1
- 2 MB of total memory. Total memory is calculated by adding Chip RAM and Fast RAM. Consider an additional half megabyte if you are not using a physical Kickstart ROM 3.2.
- 10 MB of free hard disk space.
AmigaOS 3.2.3 (Released April 2025)
AmigaOS 3.2.3 is available free of charge from the Hyperon website for those that have registered their copy of AmigaOS 3.2 via the Hyperon website. Here are the highlights of the new features and fixes of AmigaOS 3.2.3:- ReAction classes have received numerous updates.
- TextEditor now allows users to define a custom menu with macros.
- 12 KB of chip RAM is no longer reserved.
- A new Kickstart 3.2.3 ROM.
- At least 50 other fixes, including updates to DiskDoctor and HDToolbox.
AmigaOS 3.2.3 Roms
3.2.3 is a good step upgrade and it is recommended when you upgrade to 3.2.3 you also upgrade your roms to 3.2.3. We are proud to be an official Hyperion reseller.
Commodore Amiga PSU for A600
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).

Amiga A600 Recapping Service (Standard)
- Check of the board before recapping is begun (any faults found before recapping will be reported back)
- Removal of existing capacitors (both SMD and radial capacitors).
- Cleanup and preparation of area.
- Replace using either Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, CF Card boot).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.Related products

Amiga A600 8Mb Fast Ram PCMCIA switchable
- ON/OFF - You can enable or disable the card.
- 4Mb/8Mb jumper
- Transferring files from your PC/MAC using the a PCMCIA CF card adaptor
- Plug in a Ethernet card to transfer files from a PC/MAC via FTP
- Adding a CD Drive that has a PCMCIA interface

TF1230 A1200 Accelerator – NO CPU
- 128pin PGA socket ready for a genuine 68030 Gold Top CPU - MC68030RC50B (CPU NOT INCLUDED)
- 64MByte of fast-ram.
- IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
- Fits in your old/new stock A1200 case!!!
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1260 - 68060 Processor, 64Mb Ram and IDE Interface for the Amiga 1200
- TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor

TF1232 Amiga Accelerator 64Mb
- 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
- 64Mb Fast Ram
- IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
- Fits in your old/new stock A1200 case!!!
Prerequisites
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
- Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF534 - 68030 Processor, 4Mb Ram, IDE Interface and FPU Socket for A500/A500 Plus and A2000
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 - 68030 Processor 64Mb Ram amd IDE interface for the Amiga 1200
- TF4060 - 68060 Processot 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor

Amiga A600 Junior Motherboard Fully Built
-
Corrected PCB layout, removed “nowhere” traces.
-
Main Vcc rails stronger.
-
Informative silkscreen.
-
Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
-
CXA2075M Video Encoder
-
DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
-
R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
-
HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.