Back to Amiga A1000
Amiga A1000 Motherboard Recapping Service
£33.33 Excl. VAT
Amiga A1000 motherboard recapping service – NOTE this is NOT a repair service.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using Panasonic/Wurth/KEMET or other tier 1 capacitors.
Recapping the Amiga A1000 is a good preventive measure, and with age they start getting tired which could lead to issues later on, remember these are 35 plus years old now.
All that needs to be sent is the Amiga 1000 motherboard. We do also offer a recapping service for the Amiga 1000 PSU
Related products
Amiga A600 Recapping Service (PREMIUM)
Amiga A600 recapping service (Premium) using hybrid polymer capacitors (these never leak again!), all board revisions. NOTE this is NOT a repair service.
- Check of the board before recapping is begun (any faults found before recapping will be reported back)
- Removal of existing capacitors (both SMD and radial capacitors).
- Cleanup and preparation of area.
- Replace using either Panasonic/Wurth/KEMET polymer capacitors.
- Retest (Video, Audio, Floppy Boot, CF Card boot).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
Amiga A600 4Mb Fast Ram Module
This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.
Amiga A600 4Mb Fast ram module provides 4Mb of fast ram in your Amiga 600 works with all revisions of mainboard and simply plugs on top of the A600 processor. The benefit of having 4Mb of fast ram is that it opens up the world of WHDLoad as the recommended minimum of fast ram is 4Mb in an OCS/ECS Amiga. It is strongly recommended that an extra 1Mb chip ram is also present (total of 2Mb chip). Each unit is hand built and tested for 24 hrs. and built to order an take approx 3 working days from order.This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.
Amiga 4000T Recapping Service (Premium)
Amiga 4000T recapping service using polymer capacitors including Video/Audio, IO, SCSI Modules, Rev 4, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET polymer capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present)
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector.
The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz.
ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector.
What's included:
- ScanPlus ECS .
- VGA breakout socket.
- Ribbon cable to connect to VGA socket.
- Item is brand new.
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.