Back to Amiga A500 Plus
RGB2HDMI Amiga A500
RGB2HDMI EXTENDED ADAPTER FOR AMIGA 500

RGB2HDMI Amiga 500 / 500 Plus Adaptor

£29.16 Ex. VAT

RGB2HDMI Amiga 500 / 500 Plus Adaptor which plus in to the Denise socket. The RGBtoHDMI project uses a Raspberry Pi Zero (not included) to display a pixel perfect image and it can be softened or scanlines can be added to connect your Amiga A500 or A500 plus to a HDMI TV without any external converter boxes or adaptors and no soldering required!!

The advantage of this RGB2HDMI adaptor it allows you to plug Amiga 500 accelerators cards at the same time for example the TF534 or TF536

What is included:

  • RGB2HDMI adapter.
  • Cable with a switch.

 

NOTES:

  • Some very early Amiga 500 rev 3 motherboard might require soldering to provide the necessary sync signals.
  • Raspberry Pi Zero and an SD card are required – these are NOT INCLUDED.
  • PCB Colour will vary

 

This version was created by LinuxJedi and is based on the OpenSource RGB2HDMI project by c0pperdragon & hoglet67.

 

 

SKU: RGB2HDMI-LJ Categories: , , , Tags: , , , ,

You may also like…

TF1260 TerribleFire A1200 Accelerator
TF1260 TerribleFire A1200 Accelerator – NO CPU
TF1260 TerribleFire Amiga 1200 Accelerator which hosts 64Mb Fast Ram, IDE connector (DOES NOT INCLUDE 68060 PROCESSOR). The TF1260 is one of the best 060 accelerators you can purchase for the Amiga 1200 And is the next step up after the TF1230 A1200 Accelerator add-on we sell for those that want that large speed jump. Full specs:
  • 128MByte of fast-ram.
  • IDE Interface - Driver required - ehide.device
  • Compatible with any A1200 motherboard revision.
  • Fits in your old/new stock A1200 case!!!
  • Just add your choice of 68060 processor!
  Processor support: The TF1260 TerribleFire supports all genuine 68060 processors including:
  • MC68060RC50 or XC68060RC50 (Complete with MMU & FPU)
  • MC68LC060RC50 or XC68LC060RC50 (MMU No FPU)
  • MC68EC060RC50 or XC68EC060RC50 (No MMU or FPU)
Only purchase this card if you know you have a genuine 68060 processor, The low end versions that have no MMU or FPU are more often genuine.   Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  What is Terriblefire? Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:   NOTES:
  • For every TF1260 sold we donate a percentage of the sale to Stephen Leary to support further TF card developments and we also support our builders.
  • Timing fix is recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Cards sold as is, they are fully tested and a video will be shared of your card working before shipping.
  • We don't provide any advice or support for overclocking these cards, these are sold as 50Mhz. if you wish to overclock that is your choice. Heatsink and or fan required for overclocking.
 
£191.66 Ex. VAT Select options
TF1230 Accelerator Amiga 1200 - Terriblefire
TF1232 Amiga Accelerator 128Mb
TF1232 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
  • 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
  • 64Mb Fast Ram
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
 
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  • Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
 
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
£158.33 Ex. VAT Select options

Related products

Amiga 500/500 Plus Recapped
Amiga A500 Recapping Service
Amiga A500 recapping service, all board revisions, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot.
We also provide a recapping service for the Amiga A500 Plus which came with a 2.04 kickstart rom.
£29.16 Ex. VAT Select options
PiStorm Amiga A500 Adaptor
PiStorm Adaptor Amiga A500 – A500 Plus
PiStorm Adaptor is designed to connect to the Raspberry Pi 3A + (not included but available as an option below). Placed in the DIP64 (CPU) socket of your Amiga A500, A500 Plus or A2000 in conjunction with the Raspberry Pi, it can emulate the operation of the 68020/68030/68040 processor. The software running on PiOS greatly extends the functionality of the Amiga - adding FAST memory, RTG (graphics card) and a network card. PiStorm is designed for Amiga computers (A500 / A500 Plus / A1500 / A2000), but should work with any 16-bit computer equipped with a 68000 CPU socket (FC adapter lines are not currently used / supported by firmware and cannot be guaranteed to work properly on systems with use them). Overall performance with the current use of "Musashi" as a 68k processor emulator is around 70-80 MHz 68030. This adapter requires:
  • Raspberry Pi model 3A
  • 32Gb SD Card configured to boot in to WB
All available as an option below Want to know more about the PiStorm check out the following link: https://github.com/captain-amygdala/pistorm
  NOTE: This is a community project and will require some knowledge Amiga. We DO NOT provide any support for getting this product running, but support is available via the following Discord channel https://discord.com/invite/j6rPtzxaNW Also this product is still in BETA and while compatibility is very high, updates are always being released to increase compatibility with software and games. We do sell refurbished Amiga A500 and A500 Plus's which can have a PiStorm installed tested and running. Also we can add a PiStorm installation as part of any Amiga A500 or A500 Plus Service. We support developers and a percentage of the purchase price of the PiStorm adaptor is given to Claude Schwarz  The PiStorm adaptors are professionally manufacture and are RoHS compliant.  
£41.66 Ex. VAT Select options
Amiga A500 Custom Black & White
Refurbished Commodore Amiga 500 Custom

Commodore Amiga A500 – Professionally Refurbished White Edition

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU.
  • 1Mb Ram (512k slow, 512k fast).
  • 1.3 Kickstart Rom.
  • Internal Gotek Drive with side OLED display
What’s included?
  • Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
  • Brand new A500 Case White
  • Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished? Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
Want to add some upgrades? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Worldwide shipping available simply contact us for a shipping quote.     
£399.99 Ex. VAT Add to basket
Refurbished Amiga A500
Refurbished Commodore Amiga 500 PLUS

Commodore Amiga 500 PLUS – Professionally refurbished

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Rom
  • 3.5" Floppy Drive
  • UK Layout Keyboard
What’s included?
  • Professionally refurbished Amiga 500 + (PLUS) Unit (excluding mouse and PSU), these are options that can be added at the end.
  What is Refurbished? Each Commodore Amiga 500 + (PLUS) mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 + (PLUS) worked as it did when it first came from the factory back in the 1980’s. Case and keyboard is stripped and cleaned but due to age may show signs of use and age.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want up add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc. if there is something else or would like to add any mods let us know!   Shipping UK shipping will be via Parcelforce and shipping cost will be calculated the checkout. Worldwide shipping available simply contact us for a shipping quote.   Images of the Amiga 500 + (PLUS) is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 + (PLUS) we have please contact us.  
£399.99 Ex. VAT Add to basket