You may be interested in…
TF536 Accelerator for Amiga 500/2000
TF536 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a gold top Motorola 68030 CPU clocked at 50mhz, 64MB of RAM, and a 2.5" IDE connector for an CF HDD Card.
Full specs:
- MC68030RC50C Processor
- 64MByte of fast-ram.
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF534 – 68030 Processor, 4Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
TF534 Accelerator for Amiga 500/2000
NO LONGER AVAILABLE - TF536 IS THE REPLACEMENT
TF534 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a ceramic Motorola 68030 CPU with an optional 68882 FPU clocked at 33mhz, 4MB of RAM, and a 2.5" IDE connector for an CF HDD Card. Full specs:- MC68030RP33B Processor
- 4MByte of fast-ram.
- 68882 FPU PLCC Socket (FPU option below)
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 – 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
Commodore Amiga PSU for A500 A500 Plus
Commodore Amiga PSU for A500 or A500 Plus, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).