Amiga A2000 Recapping Service (Standard)
Amiga A2000 recapping service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Want to know more about recapping, check out our FAQ’s
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout.
To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the ‘Request a quote‘ link.
You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the ‘Complete your order‘ within the email. There is no need to leave the checkout page open your web browser.
Amiga 4000 Real Time Clock Service (RTC)
What is RTC service?
This service replaces 11 key components within the RTC circuit and around that could be affected by leaking battery these include:
1 x U891 – This IC is part of the fastram circuit and could be damaged by battery leakage.
1 x U178 Timer IC + socket
2 x U975,U976
1 x RP176 resistor network
1 x U177
1 x Diode for RTC reverse voltage protection
1 x battery kit PCB
1 x battery protection diode SMD
1 x battery holder
1 x CR2032 3V Lithium battery
NOTE: This service is for Amiga 4000’s that work, but have a working RTC circuit or has corrosion around this area that needs to be cleaned up.
A630 Accelerator Amiga A600 68030 50Mhz, 128Mb, FPU PURPLE
A630 Accelerator Amiga A600 68030 50Mhz inc FPU PURPLE EDITION is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 – synchronous or asynchronous clocking.
- 128MB SDRAM Fast Ram.
- Cooling: Active included.
- PCMCIA Friendly.
- PCB Colour – Purple
Important Information:
MMULib’s for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:
3.1 Kickstart:
http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme
3.2, 3.2.1 or 3.2.2
Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.
Notes:
- Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
*2Mb Chip ram is strongly recommended for WHDLoad which is available here
BigRamPlus 256Mb for Amiga A3000 A3000T A4000 & A4000T
BigRamPlus is a 256 MByte memory expansion for any Amiga with Zorro-III slots, i.e. Amiga 3000, Amiga 3000T, Amiga 4000 and Amiga 4000T. BigRamPlus is only guaranteed to work with the original daughter boards of these computers. It may or may not work properly with third party bus boards made by Micronik, RBM, Eagle, Elbox, etc.
Memory is used by all operating systems up to OS3.9 automatically. Linux/BSD may need special patches to use this memory.
AmigaOS 4.0 does not permit the use of a Z3 memory card, the computer won’t even boot into the OS. AmigaOS 4.1 can use the card’s memory as swap memory. Starting with OS4.1FE, update#1, this memory can be used as main memory.
Box contents:
- BigRamPlus card
- Instruction sheet
You will need in addition to that:
- A computer with Z3 slots (Z2 will not work!)
- A screwdriver to open your computer
X-Surf 100 for all Commodore Amigas with Zorro Slots
X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2.
Key features:
- 100MBit physical link rate
- Sana-II device for use with OS2.0 up to OS3.9
- Officially supported in the Linux-m68k kernel
- Space- and power-saving design
- Gold plated Zorro contacts and stainless steel metal bracket
- Local expansion port for our high-speed USB module “RapidRoad”
Drivers can be downloaded from here.
Manual here
Wiki here
Requirements:
- TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
- Sufficient RAM and 68020 CPU or higher
- Kickstart/Workbench 2.0 or higher
- File transfer method for drivers to be transferred to the Amiga
Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don’t allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking.
Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used.
Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the “swap” jumper.
The X-Surf-100 is officially supported in the Linux-m68k kernel.
MC68060RC50 REV 6 Genuine 68060 FPU/MMU CPU
MC68060RC50 REV 6 Genuine 68060 50Mhz processor with FPU and MMU. Perfect for any Amiga A1200 or A4000 accelerator including the TF1260 and BFG9060 for the A4000. When installing the processor in your Amiga, you will need to add the MMUlibs for 3.1 or the CPU library files if you have AmigaOS 3.2.
What’s included:
1 x MC68060RC50 REV6 CPU
Video showing the CPU you will receive will be shared and WhichAmiga program will be used to confirm its revision.
TF1260 A1200 Accelerator 68060 50MHz CPU/FPU/MMU
TF1260 Terriblefire A1200 Accelerator with XC68060RC50 50Mhz CPU which includes full FPU and MMU hosts 128Mb Fast Ram, IDE connector.
Amiga A4000 Recapping Service (Standard)
Amiga A4000 recapping service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout.
To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the ‘Request a quote‘ link.
You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the ‘Complete your order‘ within the email. There is no need to leave the checkout page open your web browser.
Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added.
A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
-
Corrected PCB layout, removed “nowhere” traces.
-
Main Vcc rails stronger.
-
Informative silkscreen.
-
Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
-
CXA2075M Video Encoder
-
DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
-
R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
-
HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.
Motherboard PCB, passive compoents arfe new, however the custom chips a some of the ports are recycled
** A600 Junior board does not come with any metal shielding. or kickstart rom.
3 Month RTB Warranty.
ACA1221LC 16Mb 68EC020 26.67Mhz Accelerator Amiga A1200
ACA1221LC accelerator Amiga A1200 and ACA500Plus comes with the 68EC020 processor (guaranteed to run at 26.67MHz) and 16MBytes physical memory. 11.2MBytes of this physical memory can be used as fastmem, and 1 MByte is reserved for a fast copy of the Kickstart ROM. The CPU speed can be switched in four steps between 14MHz and 40MHz. Overclocking the card beyond 26.67MHz will require active cooling and a very good power supply like the A1200 Boost PSU or the highly specced CA-PSU ; operation at this high speed is not guaranteed.
The ACA1221lc features iComps IDE speeder technology that accelerates reading from the internal IDE port, this IDE speeder does not require opening the computer or even removing chips from their socket. The IDE speedup to PIO mode 3 is activated with a software setting and reaches a raw data transfer rate of 10.2 MBytes per second, which results in every-day performance of 3.6MBytes/s with fast CF cards. Fast hard drives with cache may exceed 7MBytes/s performance. The IDE speeder feature is not available if connected to an ACA500 or ACA500plus.
The ACA1221lc is prepared for use with our forthcoming ACA2000, where it will provide up to 11.9MBytes of fastmem. More memory configurations allow for using Zorro cards without conflicts.
ACATool is required to unlock some of the features like:
- MapROM – Load up other kickstart roms like AmigaOS 3.2 without the need of physical ROMS
- Loading of the onboard Kickstart ROM file without losing valuable RAM
- Control the IDE speeder,
And much more!
Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209.
The unit was built from both new parts and recycled parts.
A1200 Case LED Board
A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.