Back to A500 Plus Upgrades
- You cannot add "Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header" to the basket because the product is out of stock.
Amiga 500 or 500 Plus Gotek OLED Display and FlashFloppy
£ 33.33 Excl. VAT
Amiga 500 Gotek unit is a great replacement for your failing Amiga 500 or Amiga 500 Plus floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 2 new screws will also be supplied to secure it to the Amiga 500.
You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below.
This Gotek will fit:
- Amiga A500
- Amiga A500 Plus
What are Amiga ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF’s are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
Want to know what a gotek drive is checkout this post
You may also like…
Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive.
These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200.
The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use.
You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
- OpenFlops Gotek Drive
- 3D Printed Amiga 1200 Gotek Mount
- OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:- Can be installed on many different platforms.
- Directly supports a wide range of image formats.
- Flexible track layout for Raw Sector Images.
- Extremely configurable.
- Supports AutoSwap for games with a large number of disks.
- Easily accessible pin headers for connection of a i2c display (either OLED or LCD), rotary encoder (including power).
- Easily-accessible pin header for an external speaker.
- Connected Motor signal.
- Has additional 3.3V, 5V and GND power pins.
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600.
You will need a USB memory stick (NOT included) with your loaded ADF files.
Related products
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector.
The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz.
ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector.
What's included:
- ScanPlus ECS .
- VGA breakout socket.
- Ribbon cable to connect to VGA socket.
- Item is brand new.
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
Amiga A500 Composite/S-Video Output Module
Amiga A500 Composite/S-Video output module provides both Composite and and S-Video output via a extra PCB. This service provides the Composite/S-Video module and installation to your Amiga A500.
Installation does require the whole bottom half of the Amiga so the Composite/S-Video module can be installed.
What are the benefits of the Composite/S-Video module?
- No need for the large modulator sticking out of the back of the Amiga A500.
- Provides true composite video signal as the signal is directly from the RGB outputs.
- Provides true S-Video video signal as again is directly from the RGB outputs.
- Neat internal solution that provides both composite phono port and S-Video port (case modification is required and included in the service).
Gotek Drive pre-flashed with FlashFloppy (Generic)
Gotek drive is a inexpensive solution to replace your Commodore Amiga floppy drive (plus many other makes of computers). These are generic units that simply replace your existing floppy drive or put in an external enclosure. The Gotek drive is pre flashed with FlashFloppy which allows it not only to work with the Commodore Amiga, but also Amstrad CPC computers*, Sinclair Spectrum*, Atari and DOS / IBM PC's*
You will need a USB memory stick (NOT included) with your loaded ADF files.
This Gotek drive will work with all Commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
- OLED Display instead of the 3 Digit Display
- Internal Gotek Speaker to hear those floppy sounds!
- Gotek Rotary knob for easily selecting that game, app or demo
Refurbished Commodore Amiga 500 Unit
Commodore Amiga A500 – Professionally Refurbished & Recapped
Technical Specifications- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 1.3 Kickstart Rom
- 3.5" Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]
[caption id="attachment_17766" align="aligncenter" width="300"]
Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]
Want up add some extras?
We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Shipping
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Amiga A500 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 we have please contact us.
As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload. So please do not order if you are not able to wait - Deposits are not refundable