Back to A500 Case Badges
Amiga 500 Case Badge – PiStorm Commodore
£4.16 Ex. VAT
Amiga 500 Case Badge – PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!
OUT OF STOCK
SKU: A1200-badge-PICom
Category: A500 Case Badges
Tags: A500, A500 Plus, Case Badge, commodore, PiStorm
Related products

ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector.
The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz.
ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector.
What's included:
- ScanPlus ECS .
- VGA breakout socket.
- Ribbon cable to connect to VGA socket.
- Item is brand new.
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
[paste_your_contact_form_7_shortcode_here]
Read more

Amiga CD32 Case Badge
Amiga CD32 Case Badge brand new, perfect replacement for any Amiga CD32 case. These are high quality prints finished off in a flat matt., long lasting and look very smart! Smarten up your Amiga CD32 case!

PiStorm600 Adaptor for Amiga A600
PiStorm600 for the Amiga A600 is an adaptor in which you plug in either a Raspberry Pi Model 3A+ or *Raspberry Pi Zero Model 2 (both not included) this provides a budget CPU accelerator for the Amiga 600. Also included is a file-based SCSI device, RTG graphics and several other optional enhancements.
Only the Pi 3-series is compatible with the current firmware version and only the Pi Model 3A+ and Raspberry Pi Zero Model 2 will physically fit in the A600 without modification and you can optionally support the PiStorm600 using M2.5 standoffs to help physically support it which are available as an option below.
Key Features
- Emulate 68010,68020,68030,68040,68060 Processors with or without FPU
- 128Mb Fastram.
- File-based SCSI device.
- RTG graphics from the Pi itself.
Notes:
Powering the A600/PiStorm It is possible if you have a weak PSU or the Amiga 600 has not been recapped you may see instability issues as with any accelerator, you have a few options all of which are available below, If your using a Pi Zero2 then it is unlikely you will need to apply additional power. A Pi 3A+ can consume more power, but this is not often an issue until you start connecting USB devices, you have a few options below:- You can add extra power via a floppy power connector splitter (available below) which is a new cable which splits the floppy power to power both your internal floppy drive and the PiStorm via its built in Molex connector (DO NOT ADD POWER OTHER THAN FROM THE AMIGA ITSELF OR TRY AND USE IT TO POWER OTHER DEVICES).
- Make sure your Amiga has been recapped, we offer 2 options Standard and Premium.
- Purchase a new Amiga PSU of which we also offer 2 versions, A600 Standard PSU or A600 Boost PSU which also as a 5VDC line adjustment to give a perfect 5 Volts to the Amiga 600.
*Using the Raspberry Pi Zero Model 2 is possible as mentioned but you do lose a little in performance.
[space_40]
MS-DOS PC Case Badge Black
MS-DOS PC Case Badge Black perfect for any PC case, add a touch of nostalgia from a great era in PC history. These badges are printed on high quality black vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.