Back to Amiga 1200 Cases
- You cannot add "TF1260 Case Badge (Black)" to the basket because the product is out of stock.
Amiga A1200 Case Badge – TF1200
£4.16 Ex. VAT
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
SKU: A1200-badge-TF1200
Category: Amiga 1200 Cases
Tags: A1200, A1200 Case, A1200 Case badge, TF1230 - Terriblefire 1230
Related products

Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
- Check the board before recapping is begun (any faults found before recapping will be reported back).
- Removal of existing electrolytic capacitors both SMD and through hole.
- Cleanup and preparation of areas.
- Replace using quality electrolytic capacitors.
- Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).
- Bad audio, missing channels, low volume
- Slow boot up
- Guru errors or random crashing
[space_20]
When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
- Composite Video area changed to a new decoder for improved quality.
- VGA Connector added, VGA monitor needs to support 15Khz!
- S-Video Connector for S-Video Out
- Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
- PCMCIA Reset fix.
- Optional IRQ7 Switch.
- Native PAL or NTSC Option (below)
- Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
- Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
- Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
- 9 Pin Mouse Port
- Fits in your current metal shielding**
- WHITE PCB ONLY
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.

Amiga A1200 Case Badge – Silver 3D Gel
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!

A1200 Case LED Board
A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.