Back to Amiga A3000
Refurbished Amiga A3000 Computer
Refurbished Amiga A3000 Computer
Refurbished Amiga A3000 Computer
Refurbished Amiga A3000 Computer

Amiga A3000 Refurbished with Keyboard and Mouse

£2,999.99 Ex. VAT

Amiga A3000 refurbished with original keyboard and mouse (pregnant version) This is an early model with Super-Kickstart.

In working order and has been recapped and tested:

Specs:

  • 68030 16Mhz Processor
  • 68882 FPU 16Mhz
  • 2Mb Chip Ram
  • 4Mb Fast Ram
  • Super-kickstart 1.4
  • US PSU (will include step down transformer)
  • Original Super Kickstart Floppy disk
  • Includes Workbench 1.3 and 2.04 disks

Due to the fragile nature, shipping is possible for the base unit, keyboard and mouse. However in person delivery is possible and happy to meet halfway within the UK for a charge If within the South East of the UK we can deliver to your door or collect from us (Birchington, Kent)

Overseas shipping is also possible.

 

Please contact us if you have any questions,

 

Battery are has been cleaned up, photo taken before clean up.

 

Photo will be updated soon. MONITOR NOT INCLUDED.

 

OUT OF STOCK

SKU: A3000-Refurbished Category: Tags: , , ,

Related products

Refurbished Amiga A1200
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 14/21 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]  
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned
 
Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned
  Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping now July 2024 Shipping Worldwide shipping available simply contact us for a shipping quote.     Important Notes:  
  • Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
  • As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
  • Deposits are not refundable
  • No software warranty or support is provided, any software included is sold as seen.
     
£549.99 Ex. VAT Select options
Atari Falcon 030 Refurbished/Recapped
Refurbished Atari Falcon 030 Computer

Refurbished Atari Falcon 030

Technical Specifications
  • Motorola 68030 (16Mhz) CPU
  • 4Mb Ram
  • 3.5" 1.44mb Floppy Drive
  • QWERTY Keyboard Layout
  Optional fixes/upgrades - Contact us for a quote:
  • NVRAM/RTC replacement module installed
  • Clock patch module
  • 14Mb Ram upgrade
  What’s included?
  • Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
  • Recapped both motherboard and PSU.
  What is Refurbished? The Atari Falcon mainboard has been professionally recapped deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected and tested including:
  • Full Keyboard check.
  • Floppy drive read and write test.
  • Sound checked.
  • Video checked.
  • Case and keyboard is stripped and cleaned.
    Worldwide shipping available simply contact us for a shipping quote.    Images of the Atari Falcon for illustrative purposes only, each unit will show signs of age and use. Please contact us for photos of the units we currently have      
£1,999.99 Ex. VAT Add to basket
BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000/A3000 Accelerator (No CPU)
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and provides a CPU socket that supports:
  • 68040 running at 25Mhz (our cards are set up for 68060 CPUs ONLY)
  • 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Overclocking capability up to 100 MHz with full 68060 Rev. 6 CPUs ONLY with heatsink and fan (we don't offer support for overclocking or damage).
  • Onboard 5V header to connect the optional CPU fan.
  *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. Installation guide here [hr]   For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.   *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. [space_40]
£333.33 Ex. VAT Select options
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 for Amiga A3000 Official Licenced Bundle
PRODUCT DISCONTINUED AmigaOS 3.1.4 for Amiga A3000, this product includes:
  • 2 x Physical 3.1.4 Kickstart ROMs (HI & LO) to be installed in your real Amiga.
  • Unique AmigaOS 3.1.4 serial number (to enable you to download the official AmigaOS digital files which includes AmigaOS ADF files Workbench, Install, Storage, Fonts, Extras, Locale) and the digital 3.1.4 ROM file from the Hyperion website)
  • Official AmigaOS 3.1.4 Disk Labels (6 in total)
  • Manual
We can also offer a preloaded CF Card of your choice with or without CF IDE adaptor/Ribbon as an option below.
No 3.5" floppy disks?
No problem, getting 6 x 3.5" floppy disks that work are in short supply, however we can offer a solution, we have a selection of Gotek drives which replaces your internal 3.5" floppy drive which will enable you to use the AmigaOS ADF files easily just by putting them on a USB stick (available as an option) , Gotek drives are available here Want to know what a Gotek Drive is? Check out our guide here

What is AmigaOS 3.1.4?

The new, cleaned-up, polished Amiga operating system for your 68K machine fixes all the small annoyances that have piled up over the years. Originally intended as a bug-fix release, it also modernizes many system components previously upgraded in OS 3.9.
Contrary to its modest revision number, AmigaOS 3.1.4 is arguably as large an upgrade as OS 3.9 was, and surpasses it in stability and robustness. Over 320K of release notes cover almost every aspect of your favourite classic AmigaOS -- from bootmenu to datatypes.
Some key features:
  • Over 20 Kickstart ROM modules and many more disk-based core OS components were fixed, updated, or added.
  • Native support for all Motorola 68000-68060 CPUs, and a more robust Auto-Configuration process.
  • Support for large hard disks, including boot, for any OS 2.x/3.x-compliant controller driver supporting HD_SCSI_CMD, TD_64 and/or NSD. Dedicated boot partitions are a thing of the past, even on legacy devices. You can also use variably-sized "super floppies".
  • A modernized Workbench as powerful as the OS 3.9 version, including new or refreshed Preference editors in the legacy OS 3.1-"GadTools" style. Its tools such as DiskCopy and Format fully support large media. Printer, hard disk and many other support tools have been fixed and upgraded.
  • Remember "Diskdoctor"? It earned its PhD and is now ready to reliably rescue data from your floppies or hard disks.
  • The CLI/Shell and many of its commands have been reworked and modernized, now sporting native support for pipes, softlinks, hardlinks and long filenames. New commands support running Workbench programs from the Shell or upgrading ROM modules.
  • CrossDOS and the CD-ROM filesystem are now smarter, faster, and multi-threaded, adding Rockridge and Joliet extensions as well as UDF.
  • Fully reworked, modernized and bug-fixed printer drivers include support for PCL and PostScript, along with legacy NEC and Epson printers.
  • An optional upgradeable intuition.library provides off-screen dragging of windows for native and P96 RTG screens.
  • A colorful, professionally designed icon set is included, along with the traditional four-color icons.
We are proud to be an official Hyperion reseller.  
£0.00 Ex. VAT Read more