Back to Atari ST Refurbished Units
Atari 1040 STFM Refurbished
10K pull up resistor network to the DMA databus.
STE VIDEO GHOSTING FIX ATARI STE
Bus resistors replaced with 2.2k resistor arrays Atari STE STFM
Bus resistors replaced with 2.2k resistor arrays Atari STE STFM

Refurbished Atari 1040 STE

 £ 269.99 Excl. VAT

Refurbished Atari 1040 STE.

Technical Specifications

  • Motorola 68000 (8Mhz) CPU
  • 1Mb Ram (Standard)
  • 3.5″ Floppy Drive
  • UK Layout Keyboard
  • TOS V1.62

 

What’s included?

Professionally refurbished (motherboard and PSU recapped) Atari 1040 STE inc Power lead (power cable will have correct plug depending on where its being sent).

 

What is Refurbished?

The Atari STE mainboard has been professionally recapped and is then thoroughly inspected and tested including:

  • Full Keyboard check.
  • Floppy drive read and write test.
  • Sound checked.
  • Video checked.
  • Case and keyboard is stripped and deep cleaned.

 

We can also perform any of the following Atari STE fixes if required or upgrades, ask for further details.

  • 10K pull up resistor network to the DMA databus.
  • 1772 Pull up Resistors added.
  • STE Video Ghosting Fix Applied.
  • STE Reset fix 22uF added across C100.
  • Bus resistors replaced with 2.2k resistor arrays.
  • TOS Upgrades.
  • RAM upgrades
  • Internal Gotek Drives

 

Worldwide shipping available simply contact us for a shipping quote. 

 

Images of the Atari STE for illustrative purposes only, each unit will show signs of age and use.

SKU: Refurb-Atari-1040-STE Categories: , Tags: , , ,

Related products

Refurbished Amiga A600
Refurbished Commodore Amiga 600 Unit

Commodore Amiga 600 – Professionally refurbished

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
What’s included?
  • Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
  What is Refurbished? Each Commodore Amiga 600 mainboard is professionally recapped (standard or Polymer is avilable at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 600 worked as it did when it first came from the factory back in the 1990’s. Case and keyboard is stripped and cleaned but due to age may show signs of use and age.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want up add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Shipping UK shipping will be via Parcelforce and shipping cost will be calculated the checkout. Worldwide shipping available simply contact us for a shipping quote.   Ordering We only ask for a deposit and the rest upon completion.    

Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.

 
 £ 329.99 Excl. VAT Purchase
Atari Mega STe PSU
Atari Mega STe PSU Recapping Service
Atari Mega STe 1000 PSU recapping service - NOTE this is NOT a repair service.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using quality capacitors.
  • Test output voltages (not under load)
Recapping the Atari STe PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on. All that needs to be sent is the Atari Mega STe PSU itself. [space_40]
 £ 33.33 Excl. VAT Purchase
Atari Falcon Recapping
Atari Falcon Recapping Service inc PSU
Atari Falcon recapping service including recapping of  PSU, all board revisions. This service includes both recapping of the Atari Falcons' motherboard and PSU.
  • Check of the Falcon motherboard and PSU before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the  Atari 520 STe / 1040 STE / 4160 STE   What do you need to send? All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.  
 £ 62.49 Excl. VAT Purchase
Greaseweazle v4.1 Amiga Amstrad, Spectrum
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer

Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)

 

Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:

  • Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
  • Buffered outputs, for communicating with older 5.25" and 8" disk drives
  • Integrated power connector for directly powering most 3.5" disk drives
  • Write-enable jumper can be removed for safer preservation of precious vintage disks
  • Supports flippy-modded 5.25" drives
  • Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
  • 3 user-definable outputs (eg. 8" interface REDWC signal)
  • 100% factory tested, and tested again by me before shipping

More information and documentation on the wiki page here:

This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:

 
  • A disk drive (for example a PC 3.5" or 5.25" drive)
  • A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
  • Floppy drive power cable, or power supply
  Built by Zero Flux Development. And yes this is the item mentioned on Tom's Hardware: https://www.tomshardware.com/news/raspberry-pi-emulates-amiga-1200-uses-real-floppy-disks  
 £ 19.16 Excl. VAT Purchase