You may be interested in…
PiStorm32-Lite CM4, Expansion Breakout & 64Gb SD Card Bundle
PiStorm32-Lite CM4 bundle with Raspberry Pi CM4 module, expansion breakout with HDMI, Ethernet, USB and 64Gb SD Card. This is fully assembled, just installed Workbench.
What's included:
NOTE: The PiStorm32-Lite CM4 product is a open source project and will require some knowledge of the Amiga. *AmiKit Pistorm Edition requires AmigaOS 3.2 installation disks (ADF) and an internet connection, full details here. ** Wifi (wifipi.device) is still in alpha, which means that it can (and will) contain bugs. For this version you need to set up an unencrypted 2.4GHz wireless network (without a password). However, you can hide it in your router settings so that no one else can see it and connect to it. Future versions will bring WPA/WPA2 encryption.
- Pistorm32-Lite adapter
- CM4 Adapter (Allows connection of Expansion Breakout and Compute Module 4)
- Raspberry Pi CM4 module with Wifi (Supports AmiKit also)
- Passive Cooler
- Expansion Breakout that provides HDMI, USB and Ethernet Ports
- SD Card 64GB Sandisk Ultra (pre installed EMU68 on 200MB partition) Optional upgrade to AmiKit Pistorm edition*
- Flex wire 40 Pin 20cm
- Printed IO cover (3D printed)
Now with an added option of AmiKit and AmigaOS 3.2.2 plug and play options*. Now with WiFI**!
NOTE: The PiStorm32-Lite CM4 product is a open source project and will require some knowledge of the Amiga. *AmiKit Pistorm Edition requires AmigaOS 3.2 installation disks (ADF) and an internet connection, full details here. ** Wifi (wifipi.device) is still in alpha, which means that it can (and will) contain bugs. For this version you need to set up an unencrypted 2.4GHz wireless network (without a password). However, you can hide it in your router settings so that no one else can see it and connect to it. Future versions will bring WPA/WPA2 encryption.
Elbox BlackBOX Tower 1200 MK II
Elbox BlackBOX tower 1200 MK II is a modern, functional and spacious tower case for the Amiga A1200. BlackBOX MK II offers comfortable use of a wide range of accessories you could only dream of in the original A1200 case, for example, a CD Rom Drive.
If you want to take this even further this is the perfect case for adding the Mediator PCI 1200 TX Plus which allows you to add PCI graphics cards like the Radeon 9200 graphics card, sounder blaster card and PCI network card. The powerful 450W ATX PSU is prepared for the massive expandability of your Amiga 1200 hardware.
Features:
• Tower case for Amiga A1200 computers
• 450W ATX power supply unit
• A microprocessor PC/Amiga keyboard interface
• 2 bays for 5.25" drives
• 5.25" to 2,5" black adapter for Amiga floppy disc drive (black fascia for A1200 floppy drive included)
• 2 bays for 3.5" (internal) hard disc drives
• 1 bay for 2.5" (internal) hard disc drive
• Chassis structure: steel
• Transparent side panel
• Air flow cooling system with 2 fans
• Top panel buttons: POWER and RESET
• Top panel LEDs: Power and HDD
• 2 USB connectors on the top panel - Rapidroad required
• Dimensions LxWxH: 465mm x 205mm x 445mm (18.3in x 8.1in x 17.5in)
We are able to build you an Elbox BlackBOX Tower Amiga 1200 system and can offer a wide range of configurations including and not limited to:
Refurbished Amiga A1200 Motherboard
ReAmiga A1200 Motherboard
Mediator PCI 1200 TX Plus
TF1260 with Full 68060 CPU FPU/MMU 50Mhz
Please contact us if you would like to discuss your options. Manual available here
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using an A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
- Composite Video area changed to a new decoder for improved quality.
- VGA Connector added, VGA monitor needs to support 15Khz!
- S-Video Connector for S-Video Out
- Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
- PCMCIA Reset fix.
- Optional IRQ7 Switch.
- Native PAL or NTSC Option (below)
- Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
- Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
- Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
- 9 Pin Mouse Port
- Fits in your current metal shielding**
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unaviable.
