Commodore C64 Case (and C64c) NEW Breadbin Gray

 £ 62.49 Excl. VAT

Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.

“Breadbin Gray” color scheme – the color used for the “breadbin” cabinets between 1982 and 1986.

Package includes:

  • Top half of case with sticker applied
  • Bottom half case without sticker
  • Two rubber stands, ten self-tapping plastic screws
  • User guide (colour printed)
  • White box with “Commodore” logo stickers
  • Shipping includes outer (brown) box

 

 

 

SKU: icomp-C64-black-1 Category: Tags: , , ,

You may also like…

Commodore 64/C64 PSU
Commodore C64 PSU (NEW) Breadbin and C64C
Commodore C64 PSU for the C64 Breadbin and C64C, these are brand new and modern with It's 20 watt of total combined output power and 2x smaller in dimensions & weight. NOTE: LAST UNITS HAS US PLUG
Key features:
  • Commodore C64 "breadbox", C64C, C64D & VIC20 compatible
  • Stabilized & filtered 5VDC now upgraded to 4.0A output (20W)!
  • 9VAC up to 1.11A (10VA) output by real heavy duty trafo (new model, now voltage matches the original!)
  • Carefully calibrated for C64 reference load (fixed version)
  • 5VDC voltage fine tuning feature available with Adjust & Protect Module option.
  • Multiple active & passive over current and over voltage protections
  • Fully isolated, fused on AC and DC side
  • Power On/Off switch
  • Status LED
  • Long output cable (1.8m) with round DIN 7-pin plug
  • Detachable input AC cable for UK and EU (cable included)
  • Fixed input AC cable for USA and AU versions
  • Weight only 0.6 KG (2x less than original)
  • Runs COLD!
  • UK Stock

Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Commodore C64 PSU has been designed for Commodore C64 "breadbox", C64C, C64D & VIC20 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).    
 £ 41.66 Excl. VAT Read more
Keyrah V3 for Commodore Amiga, Atari ST & PC
Keyrah V3 – Commodore Amiga, Atari ST, PC
Keyrah V3 allows you to connect original keyboards of classic computer systems like the Commodore 64 or the Amiga 1200 to modern computers (e.g. PC, Mac, or the Raspberry Pi) via USB. It also supports digital joysticks and analogue paddles of such classic systems, which will be converted to standard HID game controllers. Supported systems with this model are:
  • Commodore C64 (all models)
  • Commodore SX-64
  • Commodore VIC-20 (VC20)
  • Commodore C16
  • Commodore C128D
  • Amiga 1200
  • Amiga 600
  • Amiga 500
  • Amiga 4000/CDTV
  • Atari ST (8-pin connector only)
  • PC XT / PC AT (with PS/2 adapter)
The following systems can be made compatible by mounting additional connectors on the circuit board or using adapters:
  • Commodore C128
  • Commodore C116
  • Commodore plus/4
  • Commodore PET (8296)
  • Commodore CBM2 (B-Series)
  • Amiga 2000/3000 (with PS2 adapter)
Keyrah V3's switch allows you to switch between the standard and a keymap that's geared towards emulation. This switch looks and feels like the original power switch of the Commodore 64, adding a third switch position that allows you to send an ACPI signal to shut down/power up your computer. To avoid triggering the shutdown procedure by accident, this third position is not locked, so the switch will always flip back from it if not held in place. For further safety, the ACPI signal is only sent to the computer after being held in this position for five seconds. The box includes the Keyrah V3 circuit board and a printed manual. USB cable is not included. PCB colour will vary.
 £ 49.99 Excl. VAT Add to basket
Commodore C64 C64C Case Black New
Commodore C64 and C64c Case New Black
Commodore C64 or C64C brand new cases. If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3. "Retro Black" colour scheme following the colours of the Commodore 264 series (C16, C116 and Plus/4 computers). Package includes:
  • Top half of case with sticker applied
  • Bottom half case without sticker
  • Two rubber stands, ten self-tapping plastic screws
  • User guide (colour printed)
  • White box with "Commodore" logo stickers
  • Shipping includes outer (brown) box
   
 £ 62.49 Excl. VAT Add to basket
Indivision MK3 AGA for Amiga A1200 and A4000T
Indivision AGA MK3 Flickerfixer for A1200 and A4000T
Indivision AGA MK3 for the A1200 and A4000T* (Not A4000D Desktop) providing both a VGA connection or HDMI so you have the flexibility of using a CRT/LCD PC monitor with VGA or a large TV with HDMI in. All Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate (with the exception of A2024 monitor modes). Either using standard VESA modes or using custom output frequencies and size at the user's choice. Even custom screen modes like HighGFX can be used. Workbench resolutions of 1280x1024 pixels are possible without buying a dedicated graphics card. Indivision AGA Mk3 is plugged over the Lisa chip and a second connection over the CIA chip to route keyboard signals to the flicker fixer. You can now make small adjustments to the output picture format including positioning and re-sizing of the output picture without the need to load the configuration tool. You can simply open the on screen menu using a hot-key combination make adjustments with the keyboard or mouse and then exit this live configuration menu, all this without leaving the game or demo that's currently running. Output screen modes can be saved "per input screen mode", so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you've chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer this allows you to "zap" through pre-sets that are ideal for a specific game or demo. With this you can adjust on the fly different settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3. The Indivision also has automatic monitor recognition, the configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the "first setup" to a matter of minutes, maybe even seconds if you're using one of the pre-sets for popular display panel sizes that we provide.   What's included:
  1. Indivision AGA Mk3 for A1200/A4000T(*)
  2. Adapter board for high-definition digital (HDMI) and VGA output
  3. Adapter board for CIA chip
  4. Connection cables between all boards
  5. Short instructions
In addition, you will require:
  1. Screwdriver to open your computer
  2. A way to transfer the configuration tool (free download from our wiki)
  3. HighGFX software package from Aminet (free download for higher Workbench resolutions)
    (*)This flickerfixer will not fit into an A4000T out-of-the-box. Component CE164C gets in the way of the output cable connector and must be replaced with a lower-profile version prior to installing the flickerfixer. We recommend to do this before you order the product.   Pictures vary, PCB colour is purple.  
 
 £ 170.83 Excl. VAT Select options