Indivision AGA MK3 Flickerfixer for A1200 and A4000T
£ 204.99 Incl. VAT £ 170.83 Excl. VAT
Indivision AGA MK3 for the A1200 and A4000T* (Not A4000D Desktop) providing both a VGA connection or HDMI so you have the flexibility of using a CRT/LCD PC monitor with VGA or a large TV with HDMI in.
All Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate (with the exception of A2024 monitor modes). Either using standard VESA modes or using custom output frequencies and size at the user’s choice. Even custom screen modes like HighGFX can be used. Workbench resolutions of 1280×1024 pixels are possible without buying a dedicated graphics card.
Indivision AGA Mk3 is plugged over the Lisa chip and a second connection over the CIA chip to route keyboard signals to the flicker fixer. You can now make small adjustments to the output picture format including positioning and re-sizing of the output picture without the need to load the configuration tool. You can simply open the on screen menu using a hot-key combination make adjustments with the keyboard or mouse and then exit this live configuration menu, all this without leaving the game or demo that’s currently running.
Output screen modes can be saved “per input screen mode”, so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you’ve chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer this allows you to “zap” through pre-sets that are ideal for a specific game or demo. With this you can adjust on the fly different settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3.
The Indivision also has automatic monitor recognition, the configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the “first setup” to a matter of minutes, maybe even seconds if you’re using one of the pre-sets for popular display panel sizes that we provide.
What’s included:
- Indivision AGA Mk3 for A1200/A4000T(*)
- Adapter board for high-definition digital (HDMI) and VGA output
- Adapter board for CIA chip
- Connection cables between all boards
- Short instructions
In addition, you will require:
- Screwdriver to open your computer
- A way to transfer the configuration tool (free download from our wiki)
- HighGFX software package from Aminet (free download for higher Workbench resolutions)
(*)This flickerfixer will not fit into an A4000T out-of-the-box. Component CE164C gets in the way of the output cable connector and must be replaced with a lower-profile version prior to installing the flickerfixer. We recommend to do this before you order the product.
Pictures vary, PCB colour is purple.
You may also like…
X-Surf 100 for all Commodore Amigas with Zorro Slots
- 100MBit physical link rate
- Sana-II device for use with OS2.0 up to OS3.9
- Officially supported in the Linux-m68k kernel
- Space- and power-saving design
- Gold plated Zorro contacts and stainless steel metal bracket
- Local expansion port for our high-speed USB module "RapidRoad"
ACA500Plus Individual Computers Amiga A500 A500 Plus
- A1200-compatible clockport
- local 16-bit expansion port
- A1200 CPU card connector
- ACA500plus with DisMo, 68HC000, 8MB RAM, 8MB Flash
- Short instruction manual German/English
- Kickstart V1.2, V1.3, V3.1
- Full OS3.1 disk set with fully automatic installer
- Action Replay 3 (patched for ACA500plus)
- HRTmon
- Thor's 040/060 libraries as resident modules
- Thor's mmu and memory libraries
- Network software, TCP/IP Stack for X-Surf-500
BigRamPlus 256Mb for Amiga A3000 A3000T A4000 & A4000T
- BigRamPlus card
- Instruction sheet
- A computer with Z3 slots (Z2 will not work!)
- A screwdriver to open your computer
CA-PSU Amiga A500, A500 Plus, A600, A1200
- 5V, 5A, ripple/noise 50mV max. (typically 30mV)
- Overload on 5V tolerated up to 8A for 30 seconds
- 5V load regulation <0.6% typical, max. 0.9% under overload condition
- 12V up to 4A
- -12V, 0.1A
- Modern, high-efficiency DC-DC converter technology
- Total output power up to 60W
- Fanless, silent, extremely low heat
- Central Europe
- United Kingdom
- Australia
- USA
Related products
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
- ScanPlus ECS .
- VGA breakout socket.
- Ribbon cable to connect to VGA socket.
- Item is brand new.
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
Amiga 1200 Reproduction Box Brand New
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A1200 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 1200 reproduction box and NOT AN ORIGINAL.
A1200 Case LED Board
Commodore Amiga PSU for A500/600/1200 & CD32 (DUO Edition)
Key features:
- 1 x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
- 1 x CD32/A590 compatible (round 4pin DIN plug)
- Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
- Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
- Stabilized -12VDC up to 0.15A rated output
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
- Double over current protection, individual for each output
- Durable main AC power On/Off switch
- Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
- Eco friendly design: consumes ~20% less power compared to original PSU set
- Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
- Detachable input AC cable allowing you to use your own desired cable length (cable included)
- Weight only 0.3 KG
- Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
- Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).