THIS WILL BE THE VERY LAST PRODUCTION SO THESE ARE A SPECIAL ORDER
Amiga 1200 reproduction box, these are brand new and designed to be used as box art or to house your Amiga A1200. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 1200 was shipped.
Key features:
Box is true to the original size and design.
Including “Innards” for positioning the Amiga A1200 computer and accessories.
Laminated outside / moisture repellent.
Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
Amiga 1200 reproduction box, these are brand new and designed to be used as box art or to house your Amiga A1200. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 1200 was shipped.
Key features:
Box is true to the original size and design.
Including “Innards” for positioning the Amiga A1200 computer and accessories.
Laminated outside / moisture repellent.
Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
ACA1234 Amiga A1200 accelerator is the latest 68030 CPU based card from Individual Computers. This is far more than just another 68030 accelerator, it adds high-speed mass storage, MPAROM and many other improvements.
PiStorm32 Lite Adaptor for the Amiga A1200 is designed to connect one of the Raspberry Pi’s listed below (not included)
NOTE: We do sell a plug and play package here which includes PiStorm32-Lite, Raspberry Pi 3A & SD Card.
Once you add your own Raspberry Pi, setup an SD card and plug it in the trapdoor of the A1200 like all A1200 accelerators (TF1230 or TF1260) you will have an accelerated Amiga 1200!
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John “Chucky” Hertell. and is a full A1200 board with some extras added which include:
Composite Video area changed to a new decoder for improved quality.
VGA Connector added, VGA monitor needs to support 15Khz!
S-Video Connector for S-Video Out
Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one
kickstart and the other bank with another.
PCMCIA Reset fix.
Optional IRQ7 Switch.
Native PAL or NTSC Option (below)
Added LED’s for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
9 Pin Mouse Port
Fits in your current metal shielding**
WHITE PCB ONLY
This is a build service using a donor board you provide or provide the needed parts to complete the build.
We are able to provide a donor board if required, ask for further details.
Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.
* Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts.
** ReAmiga board does not come with any metal shielding.
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.
Asahi Amiga A1200 Case Akuma Red manufactured by A1200.net
What’s included?
Top case including enhancements
Bottom case including enhancements
Enhanced bottom trapdoor with extra vents.
Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
Rubber feet
Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 1200 case, the new cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
What is the Asahi Series of A1200 cases?
The Asahi series of A1200 cases are limited edition, once gone, they are gone. The word ‘Asahi’ is a Japanese word that means “morning” and “sunlight”. It is derived from the Japanese words asa meaning “morning” and hi meaning “sunlight”. The name symbolizes the start of a new day, and is associated with hope and new beginnings. The limited edition series are available in the following colours:
Akuma Red – The word ‘Akuma’ in Japanese means ‘Devil’. With Devil Red we reference the Red Demon. A historic figure and one of the four Guardians of the Tokugawa in Japanese history. This color Red is a very dark Wine Red but brightens up to a blood red when light emits through it.
Arashi Grey – The word ‘Arashi’ in Japanese means ‘Storm’. The case is a very dark grey, but when light emits through it turns into a brighter grey with clear blue accents.
Haruku Green – The word ‘Haruku’ is the Japanese word for ‘Hulk’. This is an ode to the big hulks of oaks you find in Japan. The case is a very dark green, but when light emits through it turns into a brighter richer green.
Shinkai Blue –The word ’Shinkai’ in Japanese means ‘Deep Sea/Ocean’ The case is a rich blue translucent which was close to the Commodore Blue but allow the right light and viewing angle to give it a dark purple hue. The blue brightens up when light emits through it.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80’s/early 90s and these cases take full advantage of that weather that’s simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements:
MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation.
The Amiga A1200 purple case has mounts to mount the MiST FPGA.
Keyrah V3 for the Amiga 1200/600, C64, VIC 20 and C16
Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots.
So what are the differences with the original Commodore case?
All screws are secured with metal brass inserts. No more broken plastic clips.
The bottom trapdoor has extra vents for a better case air flow.
2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
Reviews
There are no reviews yet.