Refurbished Atari Falcon 030 Computer
£2,399.99 Ex. VAT
Refurbished Atari Falcon 030
Technical Specifications
- Motorola 68030 (16Mhz) CPU
- 4Mb Ram
- 3.5″ 1.44mb Floppy Drive
- QWERTY Keyboard Layout
Optional fixes/upgrades – Contact us for a quote:
- NVRAM/RTC replacement module installed
- Clock patch module
- 14Mb Ram upgrade
What’s included?
- Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
- Recapped both motherboard and PSU.
What is Refurbished?
The Atari Falcon mainboard has been professionally recapped deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected and tested including:
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Atari Falcon for illustrative purposes only, each unit will show signs of age and use. Please contact us for photos of the units we currently have
Related Products
Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209.
The unit was built from both new parts and recycled parts.
Atari Mega STe PSU Recapping Service
Atari Mega STe 1000 PSU recapping service – NOTE this is NOT a repair service.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using quality capacitors.
- Test output voltages (not under load)
Recapping the Atari STe PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on.
All that needs to be sent is the Atari Mega STe PSU itself.
Alicia 1200 Amiga ITX Motherboard Fully Built
Alicia 1200 is the Amiga A1200 motherboard reimagined using the ITX form factor or is also known as Mini-ITX. This form factor is direct from the PC world which means there are many case options available. This is a fully built Alicia 1200 motherboard.
The Alicia 1200 ITX motherboard provides direct access to the same ports available on the Amiga A1200 on the back of the board but also includes a DIN Keyboard and DIN Mouse ports: Below is a list of ports available on the Alicia 1200.
External Ports:
- 1 x DB9 Joystick port
- 1 x DB15 RGB Video port
- 1 x VGA Port (15Khz only)
- 2 x Phono for left and right audio
- 1 x DB9 Serial Port
- 1 x Parallel Port
- 1 x Floppy Drive via internal header
Internal Ports:
- Standard 44-pin IDE Socket
- 22-pin Clock Port
- A dedicated Digital/Analogue Video expansion Port (VP2) (provides for flexible future video upgrades)
- Tornado V2 offers an 120-pin expansion bus for slim yet very powerful AGA systems.
- PCMCIA with angled adaptor
- Slim High Quality Adapter offering card edge support (for Amiga accelerators like PiStorm32, TF1232, ACA 1234)
Combine this with an ITX case and PSU, you will have an expandable Amiga A1200 within an ITX form factor.
What is the Tornado V2 port?
Tornado is an innovative 120-pin expansion bus containing all important signals needed to expand the system with everything from Powerful Processors with RAM and IDE, RTG Graphics adapters or Network cards
Build Service:
Like our ReAmiga A1200 build service, we will be offering fully build Alicia 1200’s where we provide all the custom chips or a donor board is supplied and we strip and recycle and install them on the Alicia 1200. More details coming soon!
This project was made possible by: Enterlogic
Refurbished Atari 1040 STE
Refurbished Atari 1040 STE.
Technical Specifications
- Motorola 68000 (8Mhz) CPU
- 1024Kb Ram (Standard)
- 3.5″ Floppy Drive
- UK Layout Keyboard
- TOS V1.62
What’s included?
Professionally refurbished (motherboard and PSU recapped) Atari 1040 STE inc Power lead (power cable will have correct plug depending on where its being sent).
What is Refurbished?
The Atari STE mainboard has been professionally recapped and is then thoroughly inspected and tested including:
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and deep cleaned.
We can also perform any of the following Atari STE fixes if required or upgrades, ask for further details.
- 10K pull up resistor network to the DMA databus.
- 1772 Pull up Resistors added.
- STE Video Ghosting Fix Applied.
- STE Reset fix 22uF added across C100.
- Bus resistors replaced with 2.2k resistor arrays.
- TOS Upgrades.
- RAM upgrades
- Internal Gotek Drives
Worldwide shipping available simply contact us for a shipping quote.
Images of the Atari STE for illustrative purposes only, each unit will show signs of age and use.
Refurbished Commodore Amiga 500 Custom
Commodore Amiga A500 – Professionally Refurbished White Edition
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU.
- 1Mb Ram (512k slow, 512k fast).
- 1.3 Kickstart Rom.
- Internal Gotek Drive with side OLED display
What’s included?
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
- Brand new A500 Case White
- Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished?
Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
Want to add some upgrades?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Worldwide shipping available simply contact us for a shipping quote.
Atari Lynx Recapping Service MK 1 or MK 2
Atari Lynx recapping service for either the Atari Lynx MK 1 or Atari Lynx MK 2 (AKA Atari Lynx 2).
Recapping service includes replacing all electrolytic capacitors of which there are approx 20 depending on the version.
Note this is not a repair service.
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout.
To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the ‘Request a quote‘ link.
You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the ‘Complete your order‘ within the email. There is no need to leave the checkout page open your web browser.
Atari ST PSU for Atari 520ST & 260ST
Atari ST PSU is a 50W strong, modern replacement power supply unit for Atari 520ST and 260ST computer systems using external power supply. PSU provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic Atari ST external PSU replacement on the market. Can be upgraded to adjustable version offering 5VDC voltage fine tuning to set exact 5VDC for your particular system. The one and only absolute industry standard using the Mean-Well’s RPT-60B as a base component.
Key features:
- ATARI 520ST, 520ST+, 260ST, 260ST+ compatible
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with round DIN 7-pin female plug
- Detachable input AC cable for all versions
- Weight only 0.4 KG (2x less than original Atari ST PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning!
Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it’s not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John “Chucky” Hertell. and is a full A1200 board with some extras added which include:
- Composite Video area changed to a new decoder for improved quality.
- VGA Connector added, VGA monitor needs to support 15Khz!
- S-Video Connector for S-Video Out
- Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one
kickstart and the other bank with another. - PCMCIA Reset fix.
- Optional IRQ7 Switch.
- Native PAL or NTSC Option (below)
- Added LED’s for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
- Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
- Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
- 9 Pin Mouse Port
- Fits in your current metal shielding**
- WHITE PCB ONLY
This is a build service using a donor board you provide or provide the needed parts to complete the build.
We are able to provide a donor board if required, ask for further details.
Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.
* Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts.
** ReAmiga board does not come with any metal shielding.
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.