Back to Amiga A3000 Upgrades
External Gotek Drive – All Commodore Amiga Computers
£108.33 Ex. VAT
External Gotek drive (new version) with a 0.96″ OLED display (5% bigger than the original OLED), rotary control housed in a brand new full metal enclosure made with strong 2mm thick aluminium metal available in 2 colours, Anodised black or Satin cream coating, with plenty of space inside for extra modifications and components.
Fully compatible with the entire Commodore Amiga family of computers including:
- Amiga A500 & Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
What’s included?
- External Gotek full metal case (choice of Anodised black or Satin cream).
- Internal Gotek Drive with 0.96″ OLED Display and rotary control.
- Flashed with latest version of FlashFloppy.
- External ribbon from Gotek drive to Amiga External Floppy port (also provides power).
NOTE: You will need to remove the right hex nut on the Amiga to be able to plug the external Gotek in as we use a 25 pin D plug with 2 pins removed, and this needs to be plugged in to the far right.
What are gotek drives in detail? Read here
What is FlashFloppy? Check out this link
Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
You may also like…
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600.
You will need a USB memory stick (NOT included) with your loaded ADF files.
Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive.
These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200.
The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use.
You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
- OpenFlops Gotek Drive
- 3D Printed Amiga 1200 Gotek Mount
- OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:- Can be installed on many different platforms.
- Directly supports a wide range of image formats.
- Flexible track layout for Raw Sector Images.
- Extremely configurable.
- Supports AutoSwap for games with a large number of disks.
- Easily accessible pin headers for connection of a i2c display (either OLED or LCD), rotary encoder (including power).
- Easily-accessible pin header for an external speaker.
- Connected Motor signal.
- Has additional 3.3V, 5V and GND power pins.
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive.
The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install.
What you will receive:
- 3D Printed Header
- OLED Display
- 30cm of cable from the header to the Gotek drive.
Related products
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer
Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)
Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:
- Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25" and 8" disk drives
- Integrated power connector for directly powering most 3.5" disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25" drives
- Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8" interface REDWC signal)
- 100% factory tested, and tested again by me before shipping
More information and documentation on the wiki page here:
This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:
- A disk drive (for example a PC 3.5" or 5.25" drive)
- A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply
ZX Spectrum 128K +3 Gotek Drive, OLED Display, FlashFloppy
ZX Spectrum 128 +3 Gotek Drive is a great replacement for your failing ZX Spectrum 128 +3 3" floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy. installation is simple, you simply remove your existing floppy drive and replace it with this unit, the Gotek drive also comes with the correct interface cable and modified power lead. You will need a USB memory stick (NOT included) with your loaded DSK files but we offer an option for a pre-configured USB stick below.
What are gotek drives in detail? Read here What is FlashFloppy check out this link
What's included?
- ZX Spectrum 128 +3 Gotek Drive and mount.
- Modified Ribbon Cable.
- Modified Power Cable.
What are DSK files?
DSK files is the standard ZX Spectrum 128 +3 disk images (including Amstrad CPC 6128) for floppy disk images. No different to Sega or Nintendo roms, DSK files are images of ZX Spectrum 128 +3 games and programs. Not only could you have access to a huge back catalogue of retro ZX Spectrum 128 +3 games and programs, but there are still brand new games being released today, for example: Captain Gopher or Bullet Storm.What are gotek drives in detail? Read here What is FlashFloppy check out this link
Amiga 2000 Gotek Drive, Printed Mount, OLED Display and FlashFloppy
Amiga 2000 Gotek drive is a great replacement for your failing Amiga 2000 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga.
You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below.
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
Amstrad CPC 6128 Gotek Drive, OLED Display, FlashFloppy
Amstrad CPC 6128 Gotek Drive is a great replacement for your failing Amstrad CPC 6128 3" floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy. installation is simple, you simply remove your existing floppy drive and replace it with this unit, the Gotek drive also comes with the correct interface cable and modified power lead. You will need a USB memory stick (NOT included) with your loaded DSK files but we offer an option for a pre-configured USB stick below.
What are gotek drives in detail? Read here What is FlashFloppy check out this link
What's included?
- Amstrad CPC 6128 Gotek Drive and mount.
- Modified Ribbon Cable.
- Modified Power Cable.
What are DSK files?
DSK files is the standard Amstrad CPC 6128 disk images (including Spectrum +3) for floppy disk images. No different to Sega or Nintendo roms, DSK files are images of Amstrad CPC 6128 games and programs. Not only could you have access to a huge back catalogue of retro Amstrad CPC 6128 games and programs, but there are still brand new games being released today, for example: The Shadows Of Sergoth or the awesome Pinball Dreams (Preview) these are all available as DSK files.What are gotek drives in detail? Read here What is FlashFloppy check out this link