BFG9060 Accelerator Amiga A4000 A3000

BFG9060 Amiga A4000/A3000 Accelerator (No CPU)

£349.99 Ex. VAT

BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and provides a CPU socket that supports:

  • 68040 running at 25Mhz (our cards are set up for 68060 CPUs ONLY)
  • 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Overclocking capability up to 100 MHz with full 68060 Rev. 6 CPUs ONLY with heatsink and fan (we don’t offer support for overclocking or damage).
  • Onboard 5V header to connect the optional CPU fan.

 

*A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen.

Installation guide here

 

For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.

 

*A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen.

SKU: BFG9060-NOCPU Category: Tags: , , ,

Description

BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and provides a CPU socket that supports:

  • 68040 running at 25Mhz (our cards are set up for 68060 CPUs’)
  • 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.

This accelerator also has 128Mb Fast Ram which is automatically detected by the Amiga.

 

Installation of the BFG9060:

Hardware

Simply swap over your current CPU card (3630, Cyberstorm) and replace with the BFG9060.

Mainboard Jumpers

The BFG9060 uses an internal 25 MHz clock provided by your Amiga, and all clock-related jumpers on the mainboard have to be set accordingly.

Amiga 3000 (Desktop and Tower) / AA3000 / AA3000+

J100
Quad Clock		 J102
Board Clock		 J103
FPU		 J104
CPU Clock
1-2 (25 MHz) 2-3 (INT) 3-4 (ON) 1-2 (INT)

Amiga 4000 (Desktop and Tower)

J100
CLK90 Clock Source		 J104
CPU Clock
1-2 (INT) 1-2 (INT)

 

 

Software:

To get the best performance, you will have to install the (mmu.library) available from https://aminet.net/package/util/libs/MMULib. And add the following line to the MMU-Configuration found in ENVARC:MMU-configuration:

SetCacheMode from 0x08000000 size 0x08000000 Valid CopyBack


Caching of Z3 is now enabled:

RAM-Cards, like BigRam or the Z3-Fastlane could not be cached and lost a lot of performance. You can enable caching for them via mmu.library now. If you have Z3-IO cards you want to disable caching.

MMU-library configuration would look like this:

Enable caching: For SetCacheMode {base} {size} Valid CopyBack

Disable caching: For SetCacheMode {base} {size} CacheInhibit NonSerial Imprecise

 

A working MMU configuration is available for download here

Options:

We are able to supply 68060RC50 (FPU/MMU) REV 6 as well as 68060EC50 CPU’s.

 

*A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen.

 

For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.

 

*A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen.

Additional information

Weight 0.800 kg
Dimensions 20 × 15 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product FAQ

This Product have no Question..!

You may also like…

BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000 Accelerator Full 060 FPU

BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and includes a full 68060 CPU running at 50Mhz with FPU and MMU.

  • 68060 running at 50 Mhz.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Onboard 5V header to connect the optional CPU fan.

 

*A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen.

Installation guide here

 

For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.

 

£708.33 Ex. VAT Add to basket

Related Products

Gotek Drive Generic Large Display and Rotary Knob
Gotek Drive Pre-Flashed with FlashFloppy, a 0.96″ Display and Rotary Knob (Generic)

Gotek Drive 0.96″ Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX.

This is the latest Gotek floppy emulator for retro computers with 3.5″ floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3″ disk drives or old PCs with 5.25″ drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3).

Flashed with current latest FlashFloppy firmware  and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.

Comes complete with Rotary select knob and large 0.96 OLED display screen

 

List of compatible devices:

 

Acorn Archimedes

Acorn BBC Micro

Amstrad CPC

Amstrad PCW

Amstrad PPC

Atari ST

Commodore Amiga

DEC

Dragon

IBM 3174

IBM PC

IBM PS/2

Kaypro

Memotech

MSX

NEC PC-98

Sharp

Sinclair QL

Spectrum

Tandy Color Computer

TI-99/4A

TSC Flex

UKNC, DVK

Akai

E-mu ESI-32

Ensoniq

General Music (GEM)

Korg

Kurzweil

Roland

Sequential Circuits Prophet 3000

Yamaha


KUKA

 

 

 

£44.16 Ex. VAT Add to basket
BigRamPlus 256Mb Commodore Amiga
BigRamPlus 256Mb for Amiga A3000 A3000T A4000 & A4000T

BigRamPlus is a 256 MByte memory expansion for any Amiga with Zorro-III slots, i.e. Amiga 3000, Amiga 3000T, Amiga 4000 and Amiga 4000T. BigRamPlus is only guaranteed to work with the original daughter boards of these computers. It may or may not work properly with third party bus boards made by Micronik, RBM, Eagle, Elbox, etc.

Memory is used by all operating systems up to OS3.9 automatically. Linux/BSD may need special patches to use this memory.

AmigaOS 4.0 does not permit the use of a Z3 memory card, the computer won’t even boot into the OS. AmigaOS 4.1 can use the card’s memory as swap memory. Starting with OS4.1FE, update#1, this memory can be used as main memory.

Box contents:

  • BigRamPlus card
  • Instruction sheet

You will need in addition to that:

  • A computer with Z3 slots (Z2 will not work!)
  • A screwdriver to open your computer

 

£83.33 Ex. VAT Add to basket
Indivision MK3 AGA for Amiga A1200 and A4000T
Indivision AGA MK3 Flickerfixer for Amiga CD32 and A4000D

Indivision AGA MK3 flickerfixer for Amiga CD32** and A4000D (also available for the Amiga A1200 and A4000T). For installation in an A4000D, a jumper needs to be bent aside (see further down). Sporting both a VGA and HDMI socket (not used at the same time) and a fully digital output which lets you connect to a modern TV or a DVI monitor. Finally, you can connect your favourite computer to a modern flat screen and use super-hires resolutions on your workbench in full colour!

Indivision AGA MK3 does everything that it’s predecessors did and much more! With the only exception of A2024 monitor modes, all Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate, either using standard VESA modes, or using custom output frequencies and size at the user’s choice. Even custom screen modes like HighGFX can be used: Workbench resolutions of 1280×1024 pixels are possible without buying a graphics card.

Further, Indivision AGA MK3 supports synchronisation of the output signal with the computer’s V-Sync signal, which was not possible with the predecessor models. This allows silky-smooth animations and perfect scrolling without tearing. These fully synchronised modes may not be compatible with all VGA- or DVI monitors (mainly because they are 50Hz for PAL machines), but 50Hz is standard for all TVs with high-definition digital input.

Indivision AGA Mk3 is plugged over the Lisa chip. For the first time, a second (optional!) connection is required to take advantage of all features of the product: An additional adapter is clipped on top of a CIA chip to route keyboard signals to the flicker fixer. This gives way for a huge practical improvement over previous versions of the flicker fixer: You can now make small adjustments to the output picture format, including positioning and resizing of the output picture without the need to load the configuration tool. You can now open a simple menu using a hot-key combination, make adjustments with the keyboard or mouse and then exit this live configuration menu – all this without leaving the game or demo that’s currently running.

Output screen modes can be saved “per input screen mode”, so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you’ve chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer. As opposed to Indivision AGA MK2, more than one output mode can be saved, and instead of making manual adjustments using the live configuration menu described before, you can just “zap” through pre-sets that are ideal for a specific game or demo. This allows you to see the difference of intensity settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3.

Another improvement over the predecessor is automatic monitor recognition: The configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the “first setup” to a matter of minutes.

Whats included:

  1. Flickerfixer for A4000D(*)/CD32(**)
  2. Adapter board for high-definition digital and VGA output
  3. Adapter board for CIA chip
  4. Connection cables between all boards
  5. Stainless steel back plate for HDMI/VGA output
  6. Short instructions
  7. A transfer method for the configuration tool (free download from individual Computers wiki)
  8. (Optional) HighGFX software package from Aminet (free download for higher Workbench resolutions)

 

(*)This flickerfixer will only fit into an A4000D after jumper J214 has been bent aside. This jumper was meant for a future chipset that was never released.

(**)For installation in a CD32, live config is only available if three solder-connections have been made, as this model does not have CIA chips. For accurate audio filter reproduction on HDMI TVs, a fourth solder connection must be made. Further, it was reported that select main boards of the CD have the crystal oscillator very close to the Lisa chip, requiring the user to move the part to the side by a fraction of a millimeter. A soldering iron may be required to accomplish this.

 

 

£183.33 Ex. VAT Add to basket
Amiga Capacitor Kit A1200 A600 CD32
Amiga A4000 Capacitor Kit Polymer (Premium)

Amiga A4000 Capacitor Kit Polymer (Premium). Polymer capacitors compared to the ‘standard’ liquid electrolyte capacitors, organic polymer is a solid electrolyte, so these capacitors will never leak. These types are still within the Commodore specification compared to other type of capacitors that are used like tantalum or polymer tantalums which should be avoided.

We only use quality capacitors and use these in our own Amiga A4000 premium recapping service.

  • Complete set of capacitors for Amiga 4000 mainboard
  • Compatible with both PAL and NTSC models
  • Compatible with all motherboard revisions

Package includes:

  • Full set of SMD and through hole capacitors.

 

It is assumed the right tools and techniques are used in replacing capacitors as we cannot accept any responsibility for any damage to your board using our Amiga A4000 Capacitor Kit. If your an sure we offer a range of Amiga recapping services including fixs and ultrasonic cleaning, contact us for any further information or search Amiga recapping services

 

Image for illustration only

 

 

£20.83 Ex. VAT Add to basket
X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots

X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2.

Key features:

  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module “RapidRoad”

Drivers can be downloaded from here.

Manual here

Wiki here

Requirements:

  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga

Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don’t allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking.

Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used.

Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the “swap” jumper.

The X-Surf-100 is officially supported in the Linux-m68k kernel.

 

 

£120.83 Ex. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2.3 A4000 ROM Burning Service for Amiga A4000

AmigaOS 3.2.3 A4000 ROM Burning Service for Amiga A4000, within this service we will burn the AmigaOS 3.2.3 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 4000.

What you will receive:
  • Physical AmigaOS 3.2.2 Kickstart HI ROM – 40 Pin 27C400 EPROM
  • Physical AmigaOS 3.2.2 Kickstart LO ROM – 40 Pin 27C400 EPROM
The Process:

This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).

Providing Proof:

We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.

We are proud to be an official Hyperion reseller.

 

£19.16 Ex. VAT Add to basket
Amiga A4000D Replica Motherboard Fully Built
Amiga A4000D Replica Motherboard FULLY BUILT

Amiga 4000D replica motherboard FULLY BUILT using 99.9% new* parts. these boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community.

 

What’s included:

  • Amiga A4000D Replica PCB in Black.
  • 99.9% new* components (DB23 port is a recycled component).
  • Includes all custom chips (new old stock).
  • Fully tested, just add daughter board, CPU card, fast ram and chip ram.

 

These are built to order and can take between 6/8 weeks, a 25% non refundable deposit is required. We can offer daughter boards, kickstart roms, 72 Pin Simm ram or CPU cards if required. No battery holder included.

 

*Custom chips are new old stock and have not been removed from working original boards, all other parts a brand new except for DB23 video port

 

 

£1,449.99 Ex. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2.3 A3000 ROM Burning Service

AmigaOS 3.2.3 A3000 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.2.3 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.

What you will receive:
  • Physical AmigaOS 3.2.2 Kickstart HI ROM
  • Physical AmigaOS 3.2.2 Kickstart LO ROM
The Process:

This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be cancelled and funds will be refunded minus any processing fees (if PayPal was used to purchase this service).

Providing Proof:

We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.

We are proud to be an official Hyperion reseller.

 

£19.16 Ex. VAT Select options