Amiga A1200 - RetroPassion Ltd

Amiga A1200 Recapping Service (PREMIUM)

Amiga A1200 recapping service (Premium) using hybrid polymer capacitors (never leak again!), all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.

Check of the board before recapping is begun (any faults found before recapping will be reported back)
Removal of existing capacitors (both SMD and radial capacitors).
Cleanup and preparation of area.
Replace using either polymer Panasonic/Wurth/KEMET capacitors.
Retest (Video, Audio, Floppy Boot, CF Card boot).

Want to know more about recapping, check out our FAQ's

Overseas recapping orders

Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.

£45.83 Ex. VAT Select options

Greaseweazle v4.1 Amiga Amstrad, Spectrum

Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer

Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)

Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:

Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
Buffered outputs, for communicating with older 5.25" and 8" disk drives
Integrated power connector for directly powering most 3.5" disk drives
Write-enable jumper can be removed for safer preservation of precious vintage disks
Supports flippy-modded 5.25" drives
Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
3 user-definable outputs (eg. 8" interface REDWC signal)
100% factory tested, and tested again by me before shipping

More information and documentation on the wiki page here:

This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:

A disk drive (for example a PC 3.5" or 5.25" drive)
A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
Floppy drive power cable, or power supply

Built by Zero Flux Development. And yes this is the item mentioned on Tom's Hardware: https://www.tomshardware.com/news/raspberry-pi-emulates-amiga-1200-uses-real-floppy-disks

£22.49 Ex. VAT Read more

Amiga 1200 Recapping Service (Standard)

Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.

Check the board before recapping is begun (any faults found before recapping will be reported back).
Removal of existing electrolytic capacitors both SMD and through hole.
Cleanup and preparation of areas.
Replace using quality electrolytic capacitors.
Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).

Common issues recapping may solve:

Bad audio, missing channels, low volume
Slow boot up
Guru errors or random crashing

[space_20]

When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]

£29.16 Ex. VAT Select options

Commodore Amiga PSU for A1200

Commodore Amiga PSU for A1200, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.

Key features:

Stabilized & filtered 5VDC up to 4A output (4.4A peak)
Stabilized & filtered 12VDC up to 2A output (2.2A peak)
Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
Carefully calibrated for Amiga 500 reference load
Active & passive over voltage protection for main +5VDC line
Over current protection for all output lines
Fully isolated & fused on AC side
Power On/Off switch
Long output cable (1.8m) with rectangular DIN 5-pin plug.
Detachable input AC cable for all versions (cable included)
Weight only 0.4 KG (2x less than original PSU)
Runs COLD!
Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
Manufactured by Electroware
UK Stock

Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).

£45.83 Ex. VAT Read more

Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications

Motorola 68020 (14Mhz) CPU
2Mb Chip Ram
3.0 Kickstart Roms
3.5" Floppy Drive
UK Layout Keyboard

What's included?

Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).

What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 14/21 working days to prepare and test depending on demand. What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]

Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping now July 2024 Shipping Worldwide shipping available simply contact us for a shipping quote. Important Notes:

Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
Deposits are not refundable
No software warranty or support is provided, any software included is sold as seen.

£549.99 Ex. VAT Select options

PiStorm32 Lite A1200 with RPi 3A+, 64Gb SD Card

PiStorm32-Lite A1200 is the full package which includes:

PiStorm32-Lite A1200 Adaptor
Raspberry Pi 3A+ Module
64Gb SD Card (Pre-installed kernel with EMU68) You will need a copy of Workbench 3.0 or above and a kickstart rom again 3.1 or above or send us an SD image and we will install and setup FOC.
3D printed RPi header protector

Once installed and setup you will have an implementation of MC68020/030/040 with FPU support, coupled with a fast implementation of the Emu68 CPU unit (Emu68 is a JIT emulator) written by Michal Schulz, thanks to it the system boots in a few seconds. Extra functionality is added (thanks to an additional RPi 3A+ module) with an HDMI port, so you can have Full HD video and around 340MB of Fast Ram. Check out this video by Capt. LeChuck, Pistorm32-Lite with EMU68K [kad_youtube url="https://www.youtube.com/watch?v=8BBU48cLuUc&t=109s" ] We also just sell the Pistorm32-Lite adaptor here, just add you own Raspberry Pi and SD Card.

NOTE: This is a open source project and will require some knowledge of the Amiga. The PiStorm adaptors are professionally manufactured, and a contribution to the developer is made.

£124.99 Ex. VAT Select options

Amiga A1200 White Case

Amiga A1200 white case new, manufactured by A1200.net What's included?

Top case including enhancements
Bottom case including enhancements
Enhanced bottom trapdoor with extra vents.
Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
Rubber feet
Set of screws

How are these brand new?

In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.

Enhancements galore:

The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V2"] [caption id="attachment_18644" align="aligncenter" width="300"]

Keyrah V3 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion] So what are the differences between the original Commodore case and the New A1200 case?

The plastic is more resistant to UV alteration. To avoid the case to turn yellow over time.
All screws are secured with metal brass inserts. No more broken plastic clips.
The bottom trapdoor has extra vents for a better case air flow.
2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy

We also offer a selection of addons including the option of new Black Amiga keycaps at a reduce price as part of a bundle and black A1200 GoDrives! Image for illustrative purposes only. Shipping July 2025

£83.33 Ex. VAT Select options

AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000

AmigaOS 3.2.2 A1200 ROM Burning Service for Amiga A1200

AmigaOS 3.2.2 A1200 ROM Burning Service for Amiga A1200, within this service we will burn the Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 1200.

What you will receive:

Physical 3.2.2 Kickstart HI ROM
Physical 3.2.2 Kickstart LO ROM

The Process:

This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be cancelled and funds will be refunded minus any processing fees (if PayPal was used to purchase this service).

We are proud to be an official Hyperion reseller.

£12.49 Ex. VAT Add to basket

PiStorm32 Lite for Amiga A1200 Adaptor Only

PiStorm32 Lite Adaptor for the Amiga A1200 is designed to connect one of the Raspberry Pi's listed below (not included) NOTE: We do sell a plug and play package here which includes PiStorm32-Lite, Raspberry Pi 3A & SD Card. Once you add your own Raspberry Pi, setup an SD card and plug it in the trapdoor of the A1200 like all A1200 accelerators (TF1230 or TF1260) you will have an accelerated Amiga 1200! Compatible Rasperry Pi's:

Raspberry Pi 3A
Raspbery Pi 3B
Raspberry Pi 4B

Want to know more about the PiStorm check out the following link: https://github.com/PiStorm/pistorm32-lite-hardware Compatible Rasperry Pi's:

Raspberry Pi 3A
Raspbery Pi 3B
Raspberry Pi 4B

With the Pistorm32-lite the A1200 can go up to a 68040 and using a Pi4 you could see 2000 Plus Mips! Want to know more about the PiStorm check out the following link: https://github.com/PiStorm/pistorm32-lite-hardware The PiStorm adaptors are professionally manufactured. and a contribution to the developer is made to support this project.

£70.83 Ex. VAT Read more

Commodore Amiga PSU for A1200 (BOOST VERSION)

Commodore Amiga PSU for A1200 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200. The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.

Key features:

Commodore Amiga 500, 500+, 600, 1200 compatible
Stabilized & filtered 5VDC up to 8A output (peak)
Stabilized & filtered 12VDC up to 0.5A output
Stabilized & filtered -12VDC up to 0.15A output
5VDC manual adjustment feature (potentiometer)
Factory calibrated for stock Amiga 500 reference load
Active & passive over voltage protections for main +5VDC line
Over current protection for all output lines
Integrates Protection & Adjustment LED Module add-on
Fully isolated & fused on AC side
Durable power On/Off switch (black)
Status LED (Good Status Green)
Long output cable (1.8m) with rectangular DIN 5-pin plug
Detachable input AC cable for all versions (cable included)
Weight only 0.4 KG (2x less than original PSU)
UK Stock

£70.83 Ex. VAT Read more

Amiga A1200 Black Case

Amiga A1200 black case NEW manufactrured by A1200.net What's included?

Top case including enhancements
Bottom case including enhancements
Enhanced bottom trapdoor with extra vents.
Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
Rubber feet
Set of screws

How are these brand new?

In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 1200 case, the new cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.

Enhancements galore:

The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V3"] [caption id="attachment_18644" align="aligncenter" width="300"]

All screws are secured with metal brass inserts. No more broken plastic clips.
The bottom trapdoor has extra vents for a better case air flow.
2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy

£83.33 Ex. VAT Select options

Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header

Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive. These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200. The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use. You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.

What's included:

OpenFlops Gotek Drive
3D Printed Amiga 1200 Gotek Mount
OLED Display with 3D Printed Header

[hr]

What is OpenFlops Gotek Drive?

OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:

Can be installed on many different platforms.
Directly supports a wide range of image formats.
Flexible track layout for Raw Sector Images.
Extremely configurable.
Supports AutoSwap for games with a large number of disks.
Easily accessible pin headers for connection of a i2c display (either OLED or LCD), rotary encoder (including power).
Easily-accessible pin header for an external speaker.
Connected Motor signal.
Has additional 3.3V, 5V and GND power pins.

Further information on what a gotek drive is can be found here

£37.49 Ex. VAT Read more