TF1230 Case Badge Amiga A1200
TF1230 Case Badge (Black)
TF1230 case badge (Black) brand new, perfect replacement for any A1200 case or for the new A1200 cases. Show off the fact you have the TF1230 accelerator in your A1200 These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!    
£4.16 Excl. VAT Add to basket
A1200 Case Grey
Amiga 1200 Case Brand New Grey

NEW STOCK ARRIVING LATE FEBRUARY 2022 - NOTE THE CASE IS GREY

New Official Amiga 1200 cases from A1200.net features and enhancements! What's included?
  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case lead by Philippe Lang, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be open up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V2"] [caption id="attachment_18644" align="aligncenter" width="300"]Keyrah V2 Keyrah V2 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V2 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion]   So what are the differences between the original Commodore case and the New A1200 case?
  • The plastic is 100% UV proof to avoid case turning yellow over time.
  • Screw brass inserts in all 6 new screw towers for smooth operations. No more broken plastic clips!
  • Bottom trapdoor offers better cooling with extra vents and 3x rear trapdoors are available: Plain door, VGA hole, DVI hole, perfect for the Re-Amiga
  • Supports for: Raspberry Pi©, MiST© FPGA, Keyrah© V2 keyboard adapter, RapidRoad© DoubleUSB  and Lotharek© HxC Floppy emulator
£88.33 Excl. VAT Select options
Amiga PSU DUO Amiga A500-600-1200 and CD32
Commodore Amiga PSU for A500/600/1200 & CD32 (DUO Edition)
Commodore Amiga PSU DUO EDITION for 1 x A500/A600/A1200 and 1 x Amiga CD32 up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200 and Amiga CD32. The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • 1 x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
  • 1 x CD32/A590 compatible (round 4pin DIN plug)
  • Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
  • Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
  • Stabilized -12VDC up to 0.15A rated output
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
  • Double over current protection, individual for each output
  • Durable main AC power On/Off switch
  • Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
  • Eco friendly design: consumes ~20% less power compared to original PSU set
  • Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
  • Detachable input AC cable allowing you to use your own desired cable length (cable included)
  • Weight only 0.3 KG
  • Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
  • Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
Checkout Ravi Abbot Review: [kad_youtube url="https://youtu.be/lqZuQ2S5TL4" ]
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£74.99 Excl. VAT Add to basket
Amiga 1200/600 Gotek Drive CLEAR
Amiga 1200 Gotek Drive, CLEAR/TRANSPARENT Mount, OLED Display and FlashFloppy
Amiga 1200 Gotek drive is a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga. You will need a USB memory stick (NOT included) with your loaded ADF files.
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
£34.99 Excl. VAT Read more
TF1230 A1200 Accelerator - No CPU
TF1230 A1200 Accelerator – NO CPU
TF1230 A1200 Accelerator (NO CPU) for the Amiga 1200 which hosts 64mb of fast ram and built in IDE port. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference. Full specs:
  • 128pin PGA socket ready for a genuine 68030 Gold Top CPU - MC68030RC50B (CPU NOT INCLUDED)
  • 64MByte of fast-ram.
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  What is TerribleFire? Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:
  • TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
  • TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
  • TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
  • TF360 - 68060 Processor other specs TBC for the Amiga CD32
  • TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
  • TF1260 - 68060 Processor, 64Mb Ram and IDE Interface for the Amiga 1200
  • TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
  • TF1200 -  Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
£133.33 Excl. VAT Add to basket
A1200 Case LEDs Amiga
A1200 Case LED Board
A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.
£9.16 Excl. VAT Add to basket
Amiga 1200 1260 WARP
Amiga A1200 Case Badge – A1260 WARP
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
£4.16 Excl. VAT Add to basket
TF1200 A1200 Case Badge TF1230
Amiga A1200 Case Badge – TF1200
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
£4.16 Excl. VAT Add to basket
A1200 Desktop Dynamite Reproduction Box
Amiga 1200 Reproduction Box Desktop Dynamite
Amiga 1200 reproduction box Desktop Dynamite, these are brand new and designed to be used as box art or to house your Amiga A1200. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 1200 was shipped.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Amiga A1200 computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.

We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 1200 reproduction box and NOT AN ORIGINAL.
£49.99 Excl. VAT Add to basket
A1200 Magic Pack Reproduction Box
Amiga 1200 Reproduction Box Magic Pack
Amiga 1200 reproduction box Magic Pack, these are brand new and designed to be used as box art or to house your Amiga A1200. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 1200 was shipped.
Key features:
  • Box is true to the original size and design.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.

We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 1200 Magic Pack reproduction box and NOT AN ORIGINAL.
£49.99 Excl. VAT Add to basket
Amiga 1200 Edge Connector Replacement
Amiga 1200 Accelerator or Ram Card Edge Connector Replacement
Amiga 1200 edge connector replacement service will replace a broken edge connector on a wide range of amiga 1200 accelerators or ram cards, a few examples below:
  • A1208 8Mb card
  • Any generic Amiga 1200 8Mb card
  • ACA Accelerator cards (ACA 1221, ACA 12xx, ACA 1230)
  • Apollo Accelerators
If you unsure if this service covers your accelerator just contact us here  
£16.66 Excl. VAT Add to basket
Apollo 1260 Extra Simm Socket
Apollo 1240 or 1260 Accelerator Additional 72pin Simm Slot
Apollo 1240/1260 addtional 72pin simm slot add-on, this will allow you to add extra ram to the Apollo 1240/1260 accelerator. Note single sided low profile 72pin simm ram is required.    
£12.49 Excl. VAT Add to basket