Commodore Amiga

Amiga 1200 Case Badge - TF1260 Black
TF1260 Case Badge (Black)
TF1260 case badge (Black) brand new, perfect replacement for any A1200 case or for the new A1200 cases. Show off you have the TF1260 accelerator in your A1200 These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
£4.16 Ex. VAT Read more
Amiga 1200 Premium Recapping Service
Amiga 4000 Recapping Service (Premium)
Amiga 4000 recapping service (Premium), all board revisions, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using Polymer Panasonic/Wurth/KEMET capacitors. (these will never leak)
  • Retest (Video, Audio, Floppy Boot, IDE).
 
£45.83 Ex. VAT Add to basket
Pistorm32-Lite CM4 Adaptor and Expansion board with HDMI, USB & Ethernet
PiStorm32-Lite CM4 Adaptor with Expansion Breakout
PiStorm32-Lite CM4 adaptor with expansion breakout with HDMI, Ethernet, USB. This is designed to be attached to the PiStorm32-lite adaptor to allow you add an Raspberry PI CM4 module. What's included:
  • CM4 Adapter (Allows connection of Expansion Breakout and Compute Module 4)
  • Passive Cooler
  • Expansion Breakout that provides HDMI, USB and Ethernet Ports
  • Flex wire 40Pin 20cm
  • Printed IO cover (3D printed)
  We also just sell the Pistorm32-Lite kits with Raspberry Pi 3A+ here
  NOTE: The PiStorm32-Lite CM4 product is an open source project and will require some knowledge of the  Amiga  
£74.99 Ex. VAT Read more
PiStorm32-Lite Rear Panel HDMI - USB & SD Card Slot
PiStorm32-Lite Rear Panel HDMI – USB – SD
PiStorm32-Lite Rear Panel which provides easy access to the internal PiStorm32-Lite HDMI, USB and SD card slot, negates the need to open up the A1200 trapdoor and access the SD card when updates are released.
The panel is 3D printed and available in:
  • White
  • Black
  • Gray
When purchasing, leave a note of the colour required.   Whats included:
  • Rear Panel
  • Micro HDMI Extension Cable
  • MicroSD Extension Cable
  • USB Extension Cable
  • M3 Screw and nut
  This is for the Pistorm32-Lite with Raspberry Pi3A+   Checkout the other great work the developer has created here  
£33.33 Ex. VAT Read more
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS Kickstart ROM Burning Service
AmigaOS 3.2 kickstart rom burning service for all Amiga models, within this service we will burn the Kickstart ROM files to physical kickstart  which can be installed in your real Amiga.
The Process:
This service requires proof of your purchase of AmigaOS 3.2 (for example screenshot of your purchase with your name).
Providing Proof:
We are proud to be an official Hyperion reseller.
£10.83 Ex. VAT Select options
Amiga A1200 Case Badge
Amiga A1200 Case Badge – White 3D Gel
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
£4.16 Ex. VAT Read more
AmigaOS 3.2 Reference Manual English Edition
AmigaOS 3.2 Reference Manual Book English Edition
AmigaOS 3.2 Reference Manual English Edition features clear explanations of the basics and advanced functions of AmigaOS 3.2 and valuable insights into the Amiga system, from A to Z. A comprehensive goto guide to the Commodore Amiga operating system for beginners, advanced users and professionals, no matter your level, this book has you covered. Spanning around 450 pages from installation on real Commodore Amiga computers but also on emulation platforms like WinUAE and the TheA500 Mini. Even if you a more seasoned Amiga user, a large section is dedicated to Shell, the command line interface of AmigaOS. The book covers new commands including practical examples in addition to shortcuts and startup scripts. Also covered is ARexx and script control for the advanced users.
Contents
  • Installation on Classic Amiga, Emulation and Mini
  • Installation of the Kickstart ROMs in all Amigas
  • Basics of the operating system
  • System optimization with Prefs
  • Using tools, utilities and commodities correctly
  • The shell: All commands explained in detail
  • Power users: Scripts, ARexx and Co.
  • Next steps: Internet, data transfer and USB
  • Amiga expansion: hardware and software
  • Service: Tips and tricks, shortcuts, glossary and much more.
  Delivery time: October 2024  
£34.99 Ex. VAT Read more
Amiga PSU DUO Amiga A500-600-1200 and CD32
Commodore Amiga PSU for 2 x A500/600/1200 (DUO EDITION)
Commodore Amiga PSU DUO EDITION for 2 x A500/A600/A1200, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200. The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • 2  x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
  • Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
  • Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
  • Stabilized -12VDC up to 0.15A rated output
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
  • Double over current protection, individual for each output
  • Durable main AC power On/Off switch
  • Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
  • Eco friendly design: consumes ~20% less power compared to original PSU set
  • Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
  • Detachable input AC cable allowing you to use your own desired cable length (cable included)
  • Weight only 0.3 KG
  • Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
  • Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
Checkout Ravi Abbot Review: [kad_youtube url="https://youtu.be/lqZuQ2S5TL4" ]    
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£83.33 Ex. VAT Read more
Replacement Amiga 500 PSU (Brand New)
Amiga CD32 PSU 50W Brand New
Amiga CD32 PSU, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Key features:
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Carefully calibrated for Amiga 500 reference load
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with circular DIN 5-pin plug.
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • Manufactured by Electroware
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga CD32 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).    
£45.83 Ex. VAT Read more
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 for Amiga A1200 Official Licenced Bundle
AmigaOS 3.1.4 for Amiga A1200, this product includes:
  • 2 x Physical 3.1.4 Kickstart ROMs (HI & LO) to be installed in your real Amiga.
  • Unique AmigaOS 3.1.4 serial number (to enable you to download the official AmigaOS digital files which includes AmigaOS ADF files Workbench, Install, Storage, Fonts, Extras, Locale) and the digital 3.1.4 ROM file from the Hyperion website)
  • Official AmigaOS 3.1.4 Disk Labels (6 in total)
  • Manual
We can also offer a preloaded CF Card of your choice with or without CF IDE adaptor/Ribbon as an option below.
No 3.5" floppy disks?
No problem, getting 6 x 3.5" floppy disks that work are in short supply, however we can offer a solution, we have a selection of Gotek drives which replaces your internal 3.5" floppy drive which will enable you to use the AmigaOS ADF files easily just by putting them on a USB stick (available as an option) , Gotek drives are available here Want to know what a Gotek Drive is? Check out our guide here

What is AmigaOS 3.1.4?

The new, cleaned-up, polished Amiga operating system for your 68K machine fixes all the small annoyances that have piled up over the years. Originally intended as a bug-fix release, it also modernizes many system components previously upgraded in OS 3.9.
Contrary to its modest revision number, AmigaOS 3.1.4 is arguably as large an upgrade as OS 3.9 was, and surpasses it in stability and robustness. Over 320K of release notes cover almost every aspect of your favourite classic AmigaOS -- from bootmenu to datatypes.
Some key features:
  • Over 20 Kickstart ROM modules and many more disk-based core OS components were fixed, updated, or added.
  • Native support for all Motorola 68000-68060 CPUs, and a more robust Auto-Configuration process.
  • Support for large hard disks, including boot, for any OS 2.x/3.x-compliant controller driver supporting HD_SCSI_CMD, TD_64 and/or NSD. Dedicated boot partitions are a thing of the past, even on legacy devices. You can also use variably-sized "super floppies".
  • A modernized Workbench as powerful as the OS 3.9 version, including new or refreshed Preference editors in the legacy OS 3.1-"GadTools" style. Its tools such as DiskCopy and Format fully support large media. Printer, hard disk and many other support tools have been fixed and upgraded.
  • Remember "Diskdoctor"? It earned its PhD and is now ready to reliably rescue data from your floppies or hard disks.
  • The CLI/Shell and many of its commands have been reworked and modernized, now sporting native support for pipes, softlinks, hardlinks and long filenames. New commands support running Workbench programs from the Shell or upgrading ROM modules.
  • CrossDOS and the CD-ROM filesystem are now smarter, faster, and multi-threaded, adding Rockridge and Joliet extensions as well as UDF.
  • Fully reworked, modernized and bug-fixed printer drivers include support for PCL and PostScript, along with legacy NEC and Epson printers.
  • An optional upgradeable intuition.library provides off-screen dragging of windows for native and P96 RTG screens.
  • A colorful, professionally designed icon set is included, along with the traditional four-color icons.
We are proud to be an official Hyperion reseller.  
£31.66 Ex. VAT Read more
Amiga 600 1Mb Chip Ram Upgrade
Amiga A600 1Mb Chip Ram Memory Expansion
Amiga A600 1Mb Chip Ram upgrade fits in the trapdoor of the Amiga 600. These cards are brand new and perfect in giving your Amiga 600 a little boost and compliments the Amiga 600 8Mb Fast ram upgrade as 2Mb chip ram is recommended if your looking to start using WHDLoad. What is WHDLoad? WHDLoad is a a solution where by the user can install hundreds of Amiga games on to a HDD/CF or SD card even if the game originally did not have the option of installing the game on to the internal HDD/CF/SD card. The vast majority of games have already been converted ready to go or you can create them yourself if you have the original game on a floppy disk/s. Also many great Amiga demos have been converted for WHDLoad.   1 Year RTB Warranty.
£20.83 Ex. VAT Read more
Keyrah V3 for Commodore Amiga, Atari ST & PC
Keyrah V3 – Commodore Amiga, Atari ST, PC
Keyrah V3 allows you to connect original keyboards of classic computer systems like the Commodore 64 or the Amiga 1200 to modern computers (e.g. PC, Mac, or the Raspberry Pi) via USB. It also supports digital joysticks and analogue paddles of such classic systems, which will be converted to standard HID game controllers. Supported systems with this model are:
  • Commodore C64 (all models)
  • Commodore SX-64
  • Commodore VIC-20 (VC20)
  • Commodore C16
  • Commodore C128D
  • Amiga 1200
  • Amiga 600
  • Amiga 500
  • Amiga 4000/CDTV
  • Atari ST (8-pin connector only)
  • PC XT / PC AT (with PS/2 adapter)
The following systems can be made compatible by mounting additional connectors on the circuit board or using adapters:
  • Commodore C128
  • Commodore C116
  • Commodore plus/4
  • Commodore PET (8296)
  • Commodore CBM2 (B-Series)
  • Amiga 2000/3000 (with PS2 adapter)
Keyrah V3's switch allows you to switch between the standard and a keymap that's geared towards emulation. This switch looks and feels like the original power switch of the Commodore 64, adding a third switch position that allows you to send an ACPI signal to shut down/power up your computer. To avoid triggering the shutdown procedure by accident, this third position is not locked, so the switch will always flip back from it if not held in place. For further safety, the ACPI signal is only sent to the computer after being held in this position for five seconds. The box includes the Keyrah V3 circuit board and a printed manual. USB cable is not included. PCB colour will vary.
£49.99 Ex. VAT Add to basket