Amiga A500++ (Plus) Motherboard Part or Fully Built

 £ 333.33 Excl. VAT

Amiga A500++ (plus plus) motherboard part or fully built (by installing the custom chips from your existing A500 Plus motherboard). These boards are brand new with 95% new parts (reused DB23 and floppy ports). Perfect replacement for a damaged Amiga Plus board or simply add to a collection.

Available either as fully built (including custom chips) tested and ready to go or simply plug in you own custom chips.

 

Features

  • Purple PCB with gold finished pads/tracks
  • Motherboard REV is based on the Amiga 500 Plus 8A
  • /INT and /OVR signal lines connection points added
  • Built in DF0/DF1 jumper
  • New Vidiot

 

We are able to proved these also as a custom built with brand new A500 cases and upgrades like the ACA500 Plus.

 

 

You may also like…

Amiga A500 A500 Plus New Case Beige
Amiga A500 Case A500 Plus Brand New Beige
Amiga A500 A500 Plus case brand new beige case from A1200.net. These Amiga A500 cases allow you to fit an original Amiga A500 motherboard or A500 Plus motherboard, a perfect case replacement for damaged or aged cases. However these cases are not just a tribute to a classic machine but also take into account some of the modern innovations that have been designed for these computers over the last few years!   Enhanced Design Features for Ultimate Convenience Firstly, experience the convenience of the enhanced design features. The cases include a new right side trapdoor, allowing for easy access to HDMI using the RGB2 HDMI adaptor, USB, and Micro SD Cards. Additionally, a rear trapdoor is available for RJ45 adapters, enhancing your connectivity options. Furthermore, the cases possess robust metal threads for screws and offer extra metal threaded mounts, compatible with Raspberry Pi and Apollo V4 SA boards.   What’s Included in Your Amiga 500 Case Box
  • 1x Amiga 500 Case (Top & Bottom Shells)
  • 1x Custom A500 Case badge (metal)
  • 1x Bottom Trap Door with vents
  • 2x Rear Trap Doors (RJ45 & Plain)
  • 2x Right Side Trap Doors (I/O Ports & Plain)
  • 1x Left Side Trap Door
  • 4x Pads + 1x Floppy button
  • 6x Screws
  EARLYBIRD: First 10 orders will also receive a FREE Amiga 1354 Tank Mouse Replacement Shell worth £19.99 inc VAT. Amiga 1354 Tank Mouse Replacement Shell   Further services: Simply contact us if you have any requests or questions    
 £ 83.33 Excl. VAT Add to basket
ACA500 Plus Enclousure/Case Amiga
ACA500Plus Individual Computers Amiga A500 A500 Plus
ACA500plus for the Amiga A500 and A500 Plus is the successor to the popular ACA500. The ACA500plus is an external expansion which is plugged to the left expansion port of your A500 or A500+. There is no need to open the computer at any time. This includes a new revolutionary method that can turn your 512k trapdoor memory expansion into chipram! If your Amiga is equipped with an ECS Agnus chip and said internal 512k memory expansion, you can turn your computer into a 1MByte-Chipram computer, just by selecting a menu item in the configuration menu of the ACA500plus! A lot of stock A500 computers with board revision 6 or higher have this exact configuration. The ACA500Plus houses a MC68HC000 processor clocked at 14.1MHz as standard, This will give your computer more than a double-speed boost. If that's not enough, you can choose overclocking to 21, 28 or even 42MHz. Overclocking success is not guaranteed. By attaching an ACA12xx or Blizzard 12xx accelerator, you can make your A500 faster than a stock A3000. The ACA500plus comes with essential software pre-installed in it's large flash. This includes fully licensed Kickstart versions V1.2 and V1.3 for backwards-compatibility, and Kickstart V3.1. You can install a freash copy of Workbench 3.1 using the built in installer which is included withing the ACA500Plus. All you need is an empty CF card, and you can install OS3.1 with a few key presses. After that's done, you can use the second CF card slot to exchange data with a modern PC: The ACA500plus supports PC-formatted cards and long filenames out of the box, no special installation required. CF cards are handled like harddisks on the Amiga-side. You can use HDtoolbox or HDinsttools - whatever you prefer. Even the two popular 64-bit addressing modes are implemented: Both TD64 and NSD64 command sets are supported, so whatever your preferred filesystem requires, you can use it on your ACA500plus setup to access flash cards that are larger than 4GBytes. Speed-wise, the CF card slots are faster than most harddisk controllers that are available for other Amiga computers. The ACA500plus even outperforms the SCSI controller of an A3000! Many users will want to use the ACA500plus with the popular WHDload software, which lets you install games on CF cards instead of swapping floppy disks if you want to play a different game. WHDload lists the 68010 processor as a minimum requirement for using the Quit-key and return to the Amiga's Workbench. The ACA500plus has special circuitry that lets you use the WHDload quit-key at any time, although you "only" have a 68HC000 processor. This is supported by WHDload V17.2 and higher. Advanced floppy control: If your computer has a defective or even a missing floppy drive, the ACA500plus can handle this. With the built-in "bootselector" circuitry, you can turn an external drive into a fully-compatible df0: drive. In addition to that, the floppy control functions allow you to make external drives invisible, although they do not have an off-switch. This saves you the work of (un)plugging drives in order to make older floppy-based software compatible. The ACA500plus features three expansion ports:
  1. A1200-compatible clockport
  2. local 16-bit expansion port
  3. A1200 CPU card connector
The A1200-compatible clockport can be used for expansions that were initially designed for the clockport of the A1200, for example Catweasel MK2, Delfina or RapidRoad. Please note that some drivers may require patching in order to work on a non-A1200 computer. Contact the vendor of your A1200 expansion to find out if they provide such a driver. The fast 16-bit local expansion port is reserved for our network expansion X-Surf-500. The A1200 CPU card connector is meant for further CPU and RAM upgrades. It is guaranteed to work with our ACA1220, ACA1221(ec, lc), ACA1232, ACA1233(n) and ACA1234 models. Our older ACA1230 accelerators are not supported. We will therefore only answer support questions about ACA1220, ACA1221(ec, lc), ACA1232, ACA1233(n) and ACA1234 accelerators. The same applies to old Blizzard accelerators by Phase 5: IComp have done thier best to make them work, but there are limits to what we can do. Please keep in mind that the A500 is a 16-bit architecture, and the Blizzard accelerators have been developed for the 32-bit architecture of the A1200. Another new feature of the ACA500plus is it's capability to make use of a rel time clock (RTC) that an A1200 accelerator provides. This keeps the clock port of the ACA500plus free for other uses. Further, an RTC that is located on the trapdoor expansion of your A500 can be used. This kind of flexibility was not available on the predecessor ACA500. With all these expansions, certain software may be incompatible. However, this is not a reason to unplug the ACA500plus, as it features an advanced cloaking mode that lets you downgrade the computer to standard memory configurations with minimal expansions (like Action Replay) or even no expansions at all, your choice of Kickstart ROM, running at the original 7MHz speed. Even if your computer does not have an internal 512k trapdoor memory expansion, the ACA500plus can not only add this, but even emulate the cycle-exact speed of the internal expansion with the same slow-down effects that an internal memory expansion has. In other words: There is no reason to unplug the ACA500plus at any time.   Package includes:
  • ACA500plus with DisMo, 68HC000, 8MB RAM, 8MB Flash
  • Short instruction manual German/English
  Software included in the flash ROM:
  • Kickstart V1.2, V1.3, V3.1
  • Full OS3.1 disk set with fully automatic installer
  • Action Replay 3 (patched for ACA500plus)
  • HRTmon
  • Thor's 040/060 libraries as resident modules
  • Thor's mmu and memory libraries
  • Network software, TCP/IP Stack for X-Surf-500
  Enclosure/Case is NOT included but available as an option.    
 £ 133.33 Excl. VAT Select options
PiStorm Amiga A500 Adaptor
PiStorm Adaptor Amiga A500 – A500 Plus
PiStorm Adaptor is designed to connect to the Raspberry Pi 3A + (not included but available as an option below). Placed in the DIP64 (CPU) socket of your Amiga A500, A500 Plus or A2000 in conjunction with the Raspberry Pi, it can emulate the operation of the 68020/68030/68040 processor. The software running on PiOS greatly extends the functionality of the Amiga - adding FAST memory, RTG (graphics card) and a network card. PiStorm is designed for Amiga computers (A500 / A500 Plus / A1500 / A2000), but should work with any 16-bit computer equipped with a 68000 CPU socket (FC adapter lines are not currently used / supported by firmware and cannot be guaranteed to work properly on systems with use them). Overall performance with the current use of "Musashi" as a 68k processor emulator is around 70-80 MHz 68030. This adapter requires:
  • Raspberry Pi model 3A
  • 32Gb SD Card configured to boot in to WB
All available as an option below Want to know more about the PiStorm check out the following link: https://github.com/captain-amygdala/pistorm
  NOTE: This is a community project and will require some knowledge Amiga. We DO NOT provide any support for getting this product running, but support is available via the following Discord channel https://discord.com/invite/j6rPtzxaNW Also this product is still in BETA and while compatibility is very high, updates are always being released to increase compatibility with software and games. We do sell refurbished Amiga A500 and A500 Plus's which can have a PiStorm installed tested and running. Also we can add a PiStorm installation as part of any Amiga A500 or A500 Plus Service. We support developers and a percentage of the purchase price of the PiStorm adaptor is given to Claude Schwarz  The PiStorm adaptors are professionally manufacture and are RoHS compliant.
 £ 41.66 Excl. VAT Select options
Replacement Amiga 500 PSU (Brand New)
Commodore Amiga PSU for A500 A500 Plus
Commodore Amiga PSU for A500 or A500 Plus, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Key features:
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
  • Carefully calibrated for Amiga 500 reference load
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with rectangular DIN 5-pin plug.
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • Manufactured by Electroware
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).    
 £ 45.83 Excl. VAT Add to basket