Refurbished Commodore Amiga 1200 Unit
£394.99 Incl. VAT£394.99 Excl. VAT
Commodore Amiga 1200 – Professionally refurbished
- Motorola 68020 (14Mhz) CPU
- 2Mb Chip Ram
- 3.0 Kickstart Roms
- 3.5″ Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
What is refurbished?
Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use.
Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 28/35 working days to prepare and test depending on demand.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
An example of the results and the process:
Want to add some extras?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc.
We only ask for a deposit and the rest upon completion.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Amiga 1200 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
As these are custom built they can take between 28/35 working days depending on what add-ons are added and workload. So please do not order if you are not able to wait.
You may also like…
Refurbished Commodore Amiga CD32
Commodore Amiga CD32 - Professionally refurbishedTechnical Specifications:
- Motorola 68020 (14Mhz) CPU
- 2Mb Chip Ram
- 2 x CD-Rom Drive
- AGA Chipset
- Refurbished Amiga CD32 Unit
- CD32 Controller
- PSU (UK)
Images of the Amiga CD32 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the CD32's we have please contact us.
Refurbished Commodore Amiga 600 Unit
Commodore Amiga 600 – Professionally refurbishedTechnical Specifications
- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 2.04 Kickstart Roms
- 3.5" Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.
Apollo 1240 or 1260 Accelerator Additional 72pin Simm Slot
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
Amiga 1200 Case Brand New Translucent
More stock arriving late Summer 2021New Official Amiga 1200 cases from A1200.net features and enhancements! What's included?
- Top case including enhancements
- Bottom case including enhancements
- Enhanced bottom trapdoor with extra vents.
- Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
- Rubber feet
- Set of screws
How are these brand new?In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case lead by Philippe Lang, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be open up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V2"] [caption id="attachment_18644" align="aligncenter" width="300"] Keyrah V2 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V2 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion] So what are the differences between the original Commodore case and the New A1200 case?
- The plastic is 100% UV proof to avoid case turning yellow over time.
- Screw brass inserts in all 6 new screw towers for smooth operations. No more broken plastic clips!
- Bottom trapdoor offers better cooling with extra vents and 3x rear trapdoors are available: Plain door, VGA hole, DVI hole, perfect for the Re-Amiga
- Supports for: Raspberry Pi©, MiST© FPGA, Keyrah© V2 keyboard adapter, RapidRoad© DoubleUSB and Lotharek© HxC Floppy emulator