Refurbished Commodore Amiga A600
£329.99 Ex. VAT
Refurbished Commodore Amiga A600
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 2.04 Kickstart Roms
- 3.5″ Floppy Drive
- UK Layout Keyboard
What’s included?
- Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
What is Refurbished?
Each Commodore Amiga 600 mainboard is professionally recapped (standard or Polymer is avilable at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 600 worked as it did when it first came from the factory back in the 1990’s.
Case and keyboard is stripped and cleaned but due to age may show signs of use and age.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
An example of the results and the process:


Want up add some extras?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Shipping
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Ordering
We only ask for a deposit and the rest upon completion.
Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.
REFURBISHED UNITS BUILD TIME 4-6 WEEKS
Related products
Alicia 1200 Amiga ITX Motherboard Fully Built
- 1 x DB9 Joystick port
- 1 x DB15 RGB Video port
- 1 x VGA Port (15Khz only)
- 2 x Phono for left and right audio
- 1 x DB9 Serial Port
- 1 x Parallel Port
- 1 x Floppy Drive via internal header
- Standard 44-pin IDE Socket
- 22-pin Clock Port
- A dedicated Digital/Analogue Video expansion Port (VP2) (provides for flexible future video upgrades)
- Tornado V2 offers an 120-pin expansion bus for slim yet very powerful AGA systems.
- PCMCIA with angled adaptor
- Slim High Quality Adapter offering card edge support (for Amiga accelerators like PiStorm32, TF1232, ACA 1234)
A630 Rev 3 Accelerator (Bare board)
- CPU socket for the Motorola MC68030 clocked on 50MHz CPU (CPU NOT INCLUDED)
- FPU socket for the 68882FN40 (FPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- The Oscillator will need some insulation tape put on top to stop the A630 touching it.
A1200 (Original) Keyboard with Black Keycaps
Refurbished Atari Falcon 030 Computer
Refurbished Atari Falcon 030
Technical Specifications- Motorola 68030 (16Mhz) CPU
- 4Mb Ram
- 3.5" 1.44mb Floppy Drive
- QWERTY Keyboard Layout
- NVRAM/RTC replacement module installed
- Clock patch module
- 14Mb Ram upgrade
- Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
- Recapped both motherboard and PSU.
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.
