A1200 (Original) Keyboard with Black Keycaps
£141.66 Ex. VAT
A1200 (Original) keyboard fully working with brand new black keycaps, multiple keyboard layouts available! These are perfect to give a new lease of life to any Amiga A1200 and us fully compatible with:
Professionally refurbished Amiga A1200 keyboards stripped down, cleaned and then replacement keycaps fitted and fully tested. Note the metal back plate and plastic layer will show signs of age.
We also sell the Amiga keycaps themselves and are available in UK, US, FR and DE layouts and are compatible with the Amiga A500, A600 (green membrane version), A1200 and CDTV.
We also sell the A1200.NET A1200 Mechanical Keyboard
You may also like…
Amiga A1200 White Case
Amiga A1200 white case new, manufactured by A1200.net
What’s included?
- Top case including enhancements
- Bottom case including enhancements
- Enhanced bottom trapdoor with extra vents.
- Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
- Rubber feet
- Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80’s/early 90s and these cases take full advantage of that weather that’s simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements:
A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself.
MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation.
The new A1200 case has mounts to mount the MiST FPGA within the A1200 case.
Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution.
Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots.
So what are the differences between the original Commodore case and the New A1200 case?
- The plastic is more resistant to UV alteration. To avoid the case to turn yellow over time.
- All screws are secured with metal brass inserts. No more broken plastic clips.
- The bottom trapdoor has extra vents for a better case air flow.
- 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
- The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy
We also offer a selection of addons including the option of new Black Amiga keycaps at a reduce price as part of a bundle and black A1200 GoDrives!
Image for illustrative purposes only.
Amiga A1200 Black Case
Amiga A1200 black case NEW manufactrured by A1200.net
What’s included?
- Top case including enhancements
- Bottom case including enhancements
- Enhanced bottom trapdoor with extra vents.
- Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
- Rubber feet
- Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 1200 case, the new cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80’s/early 90s and these cases take full advantage of that weather that’s simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements:
A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself.
MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation.
The new A1200 case has mounts to mount the MiST FPGA within the A1200 case.
Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution.
Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots.
So what are the differences between the original Commodore case and the New A1200 case?
- All screws are secured with metal brass inserts. No more broken plastic clips.
- The bottom trapdoor has extra vents for a better case air flow.
- 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
- The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy
We also offer a selection of addons including the option of new Black Amiga keycaps at a reduce price as part of a bundle and black A1200 GoDrives!
Image for illustrative purposes only.
Amiga Black Keycaps A1200 A500 A600 Multiple Layouts
Amiga Black Keycaps A1200 A500 A600 & CDTV Black Keycaps Layout Amiga Keycaps Set. Each sets contains 108 keycaps. The Keycaps can be used on ISO & ANSI keyboards, also included are extra keycaps to support the specific layout of the Mitsumi Amiga A600 Keyboard (green ribbon version NOT blue version).
Compatibility Notice
- New Amiga Keycaps are compatible with Mitsumi Switches only!
- Not compatible with Amiga 1000.
What’s in the box
- 96x Keycaps : Compatible with A1200 / A500 / A600 / A2000 / A3000 / A4000
- Includes : Standard Return Key (ISO) / FAT Return Key (ANSI) & Additional long Shift Key (ANSI)
- 12x Keycaps for Amiga A600 compatibility
- 1x Standard Space bar
- 1x Short Space bar (A600)
- 100x Springs : Should you need to replace some old ones.
- Small & Medium sized plastic clips for special key stabilizers.
A perfect compliment to our Amiga A1200 cases available in Black, White and Translucent Purple
Images are for illustrative purposes only.
Amiga A1200 Mechanical Keyboard A1200.NET
Amiga A1200 mechanical keyboard (also for Amiga A500) was developed by A1200.NET. The keyboard itself has been designed from the ground up and is fully compatible with the Amiga A1200, and Amiga A500 (with optional adaptor board) and is a direct plug-and-play replacement using the included ribbon cable for the A1200 and for Amiga 500 users the keyboard requires the optional Amiga 500 daughter-board, the controller mounts on the top right of the keyboard and connects via a custom U-shaped ribbon cable beneath the keyboard, then links to the A500 motherboard through a serial wire mirroring the original mounting location and ensuring perfect compatibility.
Designed into the new Amiga A1200 mechanical keyboard is a modular controller bay, different daughter boards can be added to adapt the same base keyboard to various Amiga models thus allowing DIY modules to be developed by individuals or hardware enthusiasts.
The keyboard is 100% compatible with the following:
Motherboards and adaptors:
- Original Amiga A1200 Motherboard (all revs)
- A1200 ReAmiga Motherboard
- Keyrah V3
- A1200NG
- Amiga A500 and A500 Plus (all revs)
- Amiga A500 RAEMIXX
Cases:
- Original A1200 cases
- Asahi A1200 cases
- A1200.net A1200 cases
- A1200.net A500 cases
Keycaps:
- Original A1200 keycaps
- New A1200.net Keycaps
Amiga A1200 Mechanical Keyboard Contents:
- Metal Body Armor
- ISO Layout
- Space Bar Stabilizer and FPC Ribbon cable included
- Keycaps NOT included (available as an option below)
Checkout this review of the prototype unit:
Related Products
Refurbished Commodore Amiga 500 PLUS
Commodore Amiga 500 PLUS – Professionally refurbished
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 2.04 Kickstart Rom
- 3.5″ Floppy Drive
- UK Layout Keyboard
What’s included?
- Professionally refurbished Amiga 500 + (PLUS) Unit (excluding mouse and PSU), these are options that can be added at the end.
What is Refurbished?
Each Commodore Amiga 500 + (PLUS) mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 + (PLUS) worked as it did when it first came from the factory back in the 1980’s.
Case and keyboard is stripped and cleaned but due to age may show signs of use and age.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
An example of the results:
Want up add some extras?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc. if there is something else or would like to add any mods let us know!
Shipping
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Amiga 500 + (PLUS) is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 + (PLUS) we have please contact us.
Amiga 500 Plus Mainboard Remake RAEMIXX500 PART BUILT
Amiga 500 Plus mainboard remake AKA Raemixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Raemixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
The Raemixx500 board has had a few improvements added compared to the original A500 Plus board:
- Kickstart Switches – You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
- DF0 Switch – Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!This is a fully built A500 Plus Raemixx500 board with all the custom chips and is plug and play, simply add your own kickstart rom or add one of the options below.
What’s included?
- Raemixx500 fully populated motherboard, NO Custom chips or ROM.
- PCB colour is WHITE
What’s not included?
-
-
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws
- Custom Chips
-
Alicia 1200 Amiga ITX Motherboard Fully Built
Alicia 1200 is the Amiga A1200 motherboard reimagined using the ITX form factor or is also known as Mini-ITX. This form factor is direct from the PC world which means there are many case options available. This is a fully built Alicia 1200 motherboard.
The Alicia 1200 ITX motherboard provides direct access to the same ports available on the Amiga A1200 on the back of the board but also includes a DIN Keyboard and DIN Mouse ports: Below is a list of ports available on the Alicia 1200.
External Ports:
- 1 x DB9 Joystick port
- 1 x DB15 RGB Video port
- 1 x VGA Port (15Khz only)
- 2 x Phono for left and right audio
- 1 x DB9 Serial Port
- 1 x Parallel Port
- 1 x Floppy Drive via internal header
Internal Ports:
- Standard 44-pin IDE Socket
- 22-pin Clock Port
- A dedicated Digital/Analogue Video expansion Port (VP2) (provides for flexible future video upgrades)
- Tornado V2 offers an 120-pin expansion bus for slim yet very powerful AGA systems.
- PCMCIA with angled adaptor
- Slim High Quality Adapter offering card edge support (for Amiga accelerators like PiStorm32, TF1232, ACA 1234)
Combine this with an ITX case and PSU, you will have an expandable Amiga A1200 within an ITX form factor.
What is the Tornado V2 port?
Tornado is an innovative 120-pin expansion bus containing all important signals needed to expand the system with everything from Powerful Processors with RAM and IDE, RTG Graphics adapters or Network cards
Build Service:
Like our ReAmiga A1200 build service, we will be offering fully build Alicia 1200’s where we provide all the custom chips or a donor board is supplied and we strip and recycle and install them on the Alicia 1200. More details coming soon!
This project was made possible by: Enterlogic
Refurbished Commodore Amiga A500
Commodore Amiga A500 – Professionally Refurbished & Recapped
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU
- 512k Chip Ram – 512k Slow Ram (1Mb Ram)
- 1.3 Kickstart Rom
- 3.5″ Floppy Drive
- UK Layout Keyboard
What’s included?
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
What is Refurbished?
Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.
Case and keyboard is stripped and cleaned but due to age may show signs of use and age. It can take up to 28 working days for machines to be completed due to the high volume of orders, please take this into account when ordering.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
Shipping:
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Amiga A500 is for illustrative purposes only, each unit will show signs of age and use.
As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload. Deposits are not refundable
Amiga A1200 Black Case and Mechanical Keyboard Bundle
Amiga A1200 black case and A1200.net mechanical keyboard bundle:
What’s included?
- Top case including enhancements
- Bottom case including enhancements
- Enhanced bottom trapdoor with extra vents.
- Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
- Rubber feet
- NEW A1200.net Amiga Mechanical Keyboard
- New A1200.net black amiga keycaps
This bundle is perfect for:
- Original A1200 Motherboards (all revs)
- Re-Amiga A1200
- A1200NG Motherboard
- Raspberry Pi builds using the Keyrah V3
So what are the differences between the original Commodore case and the New A1200 case?
- All screws are secured with metal brass inserts. No more broken plastic clips.
- The bottom trapdoor has extra vents for a better case air flow.
- 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
- The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy
Checkout this review of the prototype unit:
Image for illustrative purposes only
PiStorm32-Lite Rear Panel HDMI – USB – SD
- White
- Black
- Gray
When purchasing, leave a note of the colour required.
Whats included:
- Rear Panel
- Micro HDMI Extension Cable
- MicroSD Extension Cable
- USB Extension Cable
- M3 Screw and nut
This is for the Pistorm32-Lite with Raspberry Pi3A+
Checkout the other great work the developer has created here
Refurbished Commodore Amiga 1200 Unit
Commodore Amiga 1200 – Professionally refurbished
Technical Specifications
- Motorola 68020 (14Mhz) CPU
- 2Mb Chip Ram
- 3.0 Kickstart Roms
- 3.5″ Floppy Drive
- UK Layout Keyboard
What’s included?
- Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
What is refurbished?
Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use.
Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 21/28 working days to prepare and test depending on demand.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
An example of the results and the process:
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned
Refurbished Amiga Motherboard – Recapped & Ultrasonic Cleaned
Want to add some extras?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc.
Ordering
We only ask for a deposit and the rest upon completion. Shipping now July 2024
Shipping
Worldwide shipping available simply contact us for a shipping quote.
Important Notes:
- Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
- As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
- Deposits are not refundable
- No software warranty or support is provided, any software included is sold as seen.
Refurbished Commodore Amiga A600
Refurbished Commodore Amiga A600
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 2.04 Kickstart Roms
- 3.5″ Floppy Drive
- UK Layout Keyboard
What’s included?
- Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
What is Refurbished?
Each Commodore Amiga 600 mainboard is professionally recapped (standard or Polymer is avilable at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 600 worked as it did when it first came from the factory back in the 1990’s.
Case and keyboard is stripped and cleaned but due to age may show signs of use and age.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
An example of the results and the process:
Want up add some extras?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Shipping
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Ordering
We only ask for a deposit and the rest upon completion.
Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.