Amiga Gotek FlashFloppy OLED Header
Amiga Gotek FlashFloppy OLED Header
Amiga Gotek FlashFloppy OLED Header
Amiga Gotek OLED FlashFloppy Header

Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header

Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5″ floppy drive.

These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200.

The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use.

You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.

What’s included:
  • OpenFlops Gotek Drive
  • 3D Printed Amiga 1200 Gotek Mount
  • OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?

OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:

Further information on what a gotek drive is can be found here

 

 

This product has been discontinued.
SKU: 1200GOH-W Category: Tags: , ,

Description

Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5″ floppy drive.

These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200.

The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use.

You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.

What’s included:
  • OpenFlops Gotek Drive
  • 3D Printed Amiga 1200 Gotek Mount
  • OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?

OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek:

Further information on what a gotek drive is can be found here

Helping To Support The Centre for Computing History

 


For every OpenFlops drive sold 50p is donated to The Centre for Computing History in Cambridge, United Kingdom.

The Centre for Computing History is much more than a museum. Based in Cambridge, it hosts hands-on exhibitions, educational workshops and a wide range of activities and events. Most importantly, it makes the history of computing relevant and fun for all ages!

Visit them here: www.computinghistory.org.uk

 

 

Additional information

Weight 0.100 kg
Dimensions 13 × 13 × 3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product FAQ

This Product have no Question..!

Related Products

Amiga A1200 Keyboard Refurbished
A1200 (Original) Keyboard with Black Keycaps

A1200 (Original) keyboard fully working with brand new black keycaps, multiple keyboard layouts available. These are perfect to give a new lease of life to any Commodore Amiga A1200.

£141.66 Ex. VAT Select options
PiStorm32-Lite CM4 Module Bundle
PiStorm32-Lite CM4, Expansion Breakout & 64Gb SD Card Bundle

PiStorm32-Lite CM4 bundle with Raspberry Pi CM4 module, expansion breakout with HDMI, Ethernet, USB and 64Gb SD Card. This is fully assembled, just installed Workbench.

What’s included:

  • Pistorm32-Lite adapter
  • CM4 Adapter (Allows connection of Expansion Breakout and Compute Module 4)
  • Raspberry Pi CM4 module with Wifi (Supports AmiKit also)
  • Passive Cooler
  • Expansion Breakout that provides HDMI, USB and Ethernet Ports
  • SD Card 64GB Sandisk Ultra (pre installed EMU68 on 200MB partition) Optional upgrade to AmiKit Pistorm edition*
  • Flex wire 40 Pin 20cm
  • Printed IO cover (3D printed)

 

 

Now with an added option of AmiKit and AmigaOS 3.2.2 plug and play options*. Now with WiFI**!

AmiKit PiStorm32 SD Card

 

NOTE: The PiStorm32-Lite CM4 product is a open source project and will require some knowledge of the Amiga.

*AmiKit Pistorm Edition requires AmigaOS 3.2 installation disks (ADF) and an internet connection, full details here.

** Wifi (wifipi.device) is still in alpha, which means that it can (and will) contain bugs. For this version you need to set up an unencrypted 2.4GHz wireless network (without a password). However, you can hide it in your router settings so that no one else can see it and connect to it. Future versions will bring WPA/WPA2 encryption.

 

£183.33 Ex. VAT Read more
A1200 Case LEDs Amiga
A1200 Case LED Board

A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.

£9.16 Ex. VAT Read more
Amiga A1200 Black
Amiga A1200 Black Case

Amiga A1200 black case new, manufactured by A1200.net

What’s included?

  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws

 

 

£99.99 Ex. VAT Select options
Amiga 2000 Gotek Drive
Amiga 2000 Gotek Drive, Printed Mount, OLED Display and FlashFloppy

Amiga 2000 Gotek drive is a great replacement for your failing Amiga 2000 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga.

You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below.

What are ADF files?

ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF’s are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).

What are gotek drives in detail? Read here

What is FlashFloppy check out this link

Want to know even more about them, checkout retro32.com’s review of them here

Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!

£33.33 Ex. VAT Select options
PiStorm32-Lite Rear Panel HDMI - USB & SD Card Slot
PiStorm32-Lite Rear Panel HDMI – USB – SD
PiStorm32-Lite Rear Panel which provides easy access to the internal PiStorm32-Lite HDMI, USB and SD card slot, negates the need to open up the A1200 trapdoor and access the SD card when updates are released.
The panel is 3D printed and available in:
  • White
  • Black
  • Gray

When purchasing, leave a note of the colour required.

 

Whats included:

  • Rear Panel
  • Micro HDMI Extension Cable
  • MicroSD Extension Cable
  • USB Extension Cable
  • M3 Screw and nut

 

This is for the Pistorm32-Lite with Raspberry Pi3A+

 

Checkout the other great work the developer has created here

 

£33.33 Ex. VAT Read more
GoDrive1200 Gotek A1200 A500
GoDrive1200 Gotek for Amiga A1200 and A500

GoDrive1200 Gotek for Amiga A1200 and A500 is an upgrade that provides you both the use of your current internal floppy drive in the A1200 and A500 and also have access to a Gotek drive, so have the best of both worlds floppy drive and Gotek drive.

 

Features:

  • Large 1.3” OLED screen
  • Rotary encoder with switch
  • Activity LED light
  • Drive selector
  • USB socket
  • FlashFloppy Firmware

The unit requires no cutting of the case!!

 

Notes:

Compatible with all Amiga 1200 units however there are exceptions as the A1200 came with different makes of floppy drive so if you have:

  • Mitsumi D357T2,
  • TEAC FD-235HF,
  • Panasonic JU-253-043P

Please ask for a SLIM version, as these drives are too long to fit standard GoDRIvE1200 model.

Escom Amiga 1200

If you are owner of ESCOM A1200, GoDRIvE1200 will not work without modifying mainboard and replacing PC-compatible FDD fitted, for Amiga compatible one. There is a wire underneath the floppy connector that is bridging Pin 2 and Pin 34, this simply needs cutting out or de soldered.

 

 

£99.99 Ex. VAT Select options
Greaseweazle v4.1 Amiga Amstrad, Spectrum
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer

Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed.

This includes, PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE).

£27.49 Ex. VAT Add to basket