Back to Amiga A1200
Sum A1200 Keyboard Adaptor

Sum A1200 USB Keyboard Adaptor

Sum A1200 USB Keyboard adaptor is a USB interface for HID keyboards (ONLY) without the need for installing additional AmigaOS software drivers. Device’s installation procedure consists of simply attaching it the U7 chip located on A1200’s motherboard. Additional feature of the adapter is its “Bootloader” function allowing future firmware upgrades.
Sum A1200 USB comes with dedicated configuration mode, which becomes available when you by pressing both the  Right-Shift + Pause keys together. User preferences are saved to the built-in EEPROM memory.
Key Features of the Sum A1200
  • Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
  • A1200 compatibility (U7 chip-attached).
  • Built-in USB stack.
  • Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
  • Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
  • Built-in EEPROM memory enabling user preferences storage.
  • “Bootloader” function allowing future firmware upgrades.
  • “Status” indicator LED providing information about device’s state.
  • built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
  • Non-blocking keyboard A1200 – You can still use the inbuilt A1200 keyboard.
Entering configuration mode (R-Shift + Pause)
  • F1 – RESET type – software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
  • F2 – mapped Amiga Right to Alt Right,
  • F10 – view keycode (on / off),
  • F12 – display configuration

 

Amiga keys USB keyboard
Amiga reset CTRL + L-Win + R-Win
CTRL + L-Alt + R-Alt
CTRL + L-Alt + Del
Help F12
L-Amiga L-Win
R-Amiga R-Win

 

 

This product has been discontinued.
SKU: SUM-A1200 Categories: , Tags: , ,

You may also like…

Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 recapping service (Premium) using hybrid polymer capacitors (never leak again!), all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either polymer Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's  
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
£45.83 Ex. VAT Select options
TF1230 Accelerator Amiga 1200 - Terriblefire
TF1232 Amiga Accelerator 128Mb
TF1232 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
  • 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
  • 64Mb Fast Ram
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
 
Prerequisites 
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  • Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
 
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
£158.33 Ex. VAT Select options
Amiga 1200 Mainboard recapped
Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check the board before recapping is begun (any faults found before recapping will be reported back).
  • Removal of existing electrolytic capacitors both SMD and through hole.
  • Cleanup and preparation of areas.
  • Replace using quality electrolytic capacitors.
  • Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).
Common issues recapping may solve:
  • Bad audio, missing channels, low volume
  • Slow boot up
  • Guru errors or random crashing
[space_20]
When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]    
£29.16 Ex. VAT Select options

Related products

Akuma Red Asahi A1200 Amiga Case
Asahi Amiga A1200 Case Akuma Red
Asahi Amiga A1200 Case Akuma Red manufactured by A1200.net What's included?
  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 1200 case, the new cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.  
What is the Asahi Series of A1200 cases?
The Asahi series of A1200 cases are limited edition, once gone, they are gone. The word 'Asahi' is a Japanese word that means "morning" and "sunlight". It is derived from the Japanese words asa meaning "morning" and hi meaning "sunlight". The name symbolizes the start of a new day, and is associated with hope and new beginnings. The limited edition series are available in the following colours: Akuma Red - The word ‘Akuma’ in Japanese means ‘Devil’. With Devil Red we reference the Red Demon. A historic figure and one of the four Guardians of the Tokugawa in Japanese history. This color Red is a very dark Wine Red but brightens up to a blood red when light emits through it. Arashi Grey - The word ‘Arashi’ in Japanese means ‘Storm’. The case is a very dark grey, but when light emits through it turns into a brighter grey with clear blue accents.
Haruku Green - The word ‘Haruku’ is the Japanese word for ‘Hulk’. This is an ode to the big hulks of oaks you find in Japan. The case is a very dark green, but when light emits through it turns into a brighter richer green.
Shinkai Blue -The word ’Shinkai’ in Japanese means ‘Deep Sea/Ocean’ The case is a rich blue translucent which was close to the Commodore Blue but allow the right light and viewing angle to give it a dark purple hue. The blue brightens up when light emits through it.
 
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The Amiga A1200 purple case has mounts to mount the MiST FPGA. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V3"] [caption id="attachment_18644" align="aligncenter" width="300"]Keyrah V2 Keyrah V3 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion]   So what are the differences with the original Commodore case?
  • All screws are secured with metal brass inserts. No more broken plastic clips.
  • The bottom trapdoor has extra vents for a better case air flow.
  • 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
  • The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy
  *Keycaps NOT included but available as an option.    
£83.33 Ex. VAT Read more
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
  • Composite Video area changed to a new decoder for improved quality.
  • VGA Connector added, VGA monitor needs to support 15Khz!
  • S-Video Connector for S-Video Out
  • Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
  • PCMCIA Reset fix.
  • Optional IRQ7 Switch.
  • Native PAL or NTSC Option (below)
  • Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
  • Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
  • Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
  • 9 Pin Mouse Port
  • Fits in your current metal shielding**
  • WHITE PCB ONLY
  This is a build service using a donor board you provide or provide the needed parts to complete the build. We are able to provide a donor board if required, ask for further details.    Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.   * Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts. ** ReAmiga board does not come with any metal shielding.   
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.
   
£699.99 Ex. VAT Add to basket
Refurbished Amiga A1200
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 21/28 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]  
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned
 
Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned
  Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping now July 2024 Shipping Worldwide shipping available simply contact us for a shipping quote.     Important Notes:  
  • Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
  • As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
  • Deposits are not refundable
  • No software warranty or support is provided, any software included is sold as seen.
     
£549.99 Ex. VAT Select options
PiStorm32-Lite for Amiga A1200
PiStorm32 Lite for Amiga A1200 Adaptor Only
PiStorm32 Lite Adaptor for the Amiga A1200 is designed to connect one of the Raspberry Pi's listed below (not included) NOTE: We do sell a plug and play package here which includes PiStorm32-Lite, Raspberry Pi 3A & SD Card. Once you add your own Raspberry Pi, setup an SD card and plug it in the trapdoor of the A1200 like all A1200 accelerators (TF1230 or TF1260) you will have an accelerated Amiga 1200!   Compatible Rasperry Pi's:
  • Raspberry Pi 3A
  • Raspbery Pi 3B
  • Raspberry Pi 4B
  Want to know more about the PiStorm check out the following link: https://github.com/PiStorm/pistorm32-lite-hardware   Compatible Rasperry Pi's:
  • Raspberry Pi 3A
  • Raspbery Pi 3B
  • Raspberry Pi 4B
  With the Pistorm32-lite the A1200 can go up to a 68040 and using a Pi4 you could see 2000 Plus Mips! Want to know more about the PiStorm check out the following link: https://github.com/PiStorm/pistorm32-lite-hardware   The PiStorm adaptors are professionally manufactured. and a contribution to the developer is made to support this project.      
£70.83 Ex. VAT Read more