Back to Amiga A600
xT Accelerator for Amiga 600
xT Accelerator for Amiga 600
xt Accelerator A600 CLI
xt Accelerator A600 CLI options

xT Accelerator Amiga A600, 28Mhz CPU, 11MB Fastram

£79.16 Ex. VAT

xT Accelerator Amiga A600 with an onboard 28Mhz CPU with 11MB Fastram is one of the smallest and slimmest accelerator cards for the Amiga 600 computer, with some extra skill you can also fit the original HDD sled to it.The card is mounted on top of the MC68000 PLCC68 processor. All configuration options are available in the CLI.

 

Full specs:

  • CPU MC68SEC000AA20, clocked on 28MHz.
  • 11MB Fast Ram.
  • MapROM Feature.
  • PCMCIA Friendly – Ram needs to be set to 4MB.
  • Embedded hardware DriveSWAP DF0/DF1 (Boot Selector).

 

Notes:
  • Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1.
  • PCB Colour will vary

*2Mb Chip ram is strongly recommended for WHDLoad which is available here

 

 

 

OUT OF STOCK

SKU: xT-A600-A Categories: , Tags: , , ,

You may also like…

Amiga 600 recapped polymer capacitors
Amiga A600 Recapping Service (PREMIUM)
Amiga A600 recapping service (Premium) using hybrid polymer capacitors (these never leak again!), all board revisions. NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either Panasonic/Wurth/KEMET polymer capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
£45.83 Ex. VAT Select options
Amiga 600 Recapped
Amiga A600 Recapping Service (Standard)
Amiga A600 Recapping Service. All board revisions (1.1,1.3,1.5,2B,2D). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.    
£29.16 Ex. VAT Select options

Related products

Greaseweazle v4.1 Amiga Amstrad, Spectrum
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer

Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)

 

Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:

  • Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
  • Buffered outputs, for communicating with older 5.25" and 8" disk drives
  • Integrated power connector for directly powering most 3.5" disk drives
  • Write-enable jumper can be removed for safer preservation of precious vintage disks
  • Supports flippy-modded 5.25" drives
  • Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
  • 3 user-definable outputs (eg. 8" interface REDWC signal)
  • 100% factory tested, and tested again by me before shipping

More information and documentation on the wiki page here:

This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:

 
  • A disk drive (for example a PC 3.5" or 5.25" drive)
  • A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
  • Floppy drive power cable, or power supply
  Built by Zero Flux Development. And yes this is the item mentioned on Tom's Hardware: https://www.tomshardware.com/news/raspberry-pi-emulates-amiga-1200-uses-real-floppy-disks  
£27.49 Ex. VAT Add to basket
Black Amiga Keycaps US Layout
Amiga Black Keycaps A1200 A500 A600 Multiple Layouts
Amiga Black Keycaps A1200 A500 A600 & CDTV Black Keycaps  Layout Amiga Keycaps Set. Each sets contains 108 keycaps. The Keycaps can be used on ISO & ANSI keyboards, also included are extra keycaps to support the specific layout of the Mitsumi Amiga A600 Keyboard (green ribbon version NOT blue version).   Compatibility Notice
  • New Amiga Keycaps are compatible with Mitsumi Switches only!
  • Not compatible with Amiga 1000.
  What’s in the box
  • 96x Keycaps : Compatible with A1200 / A500 / A600 / A2000 / A3000 / A4000
  • Includes : Standard Return Key (ISO) / FAT Return Key (ANSI) & Additional long Shift Key (ANSI)
  • 12x Keycaps for Amiga A600 compatibility
  • 1x Standard Space bar
  • 1x Short Space bar (A600)
  • 100x Springs : Should you need to replace some old ones.
  • Small & Medium sized plastic clips for special key stabilizers.
  A perfect compliment to our Amiga A1200 cases available in Black, White and Translucent Purple   [gallery ids="27601,27600,27599"]      
Images are for illustrative purposes only.
   
£83.33 Ex. VAT Select options
Keyrah V3 for Commodore Amiga, Atari ST & PC
Keyrah V3 – Commodore Amiga, Atari ST, PC
Keyrah V3 allows you to connect original keyboards of classic computer systems like the Commodore 64 or the Amiga 1200 to modern computers (e.g. PC, Mac, or the Raspberry Pi) via USB. It also supports digital joysticks and analogue paddles of such classic systems, which will be converted to standard HID game controllers. Supported systems with this model are:
  • Commodore C64 (all models)
  • Commodore SX-64
  • Commodore VIC-20 (VC20)
  • Commodore C16
  • Commodore C128D
  • Amiga 1200
  • Amiga 600
  • Amiga 500
  • Amiga 4000/CDTV
  • Atari ST (8-pin connector only)
  • PC XT / PC AT (with PS/2 adapter)
The following systems can be made compatible by mounting additional connectors on the circuit board or using adapters:
  • Commodore C128
  • Commodore C116
  • Commodore plus/4
  • Commodore PET (8296)
  • Commodore CBM2 (B-Series)
  • Amiga 2000/3000 (with PS2 adapter)
Keyrah V3's switch allows you to switch between the standard and a keymap that's geared towards emulation. This switch looks and feels like the original power switch of the Commodore 64, adding a third switch position that allows you to send an ACPI signal to shut down/power up your computer. To avoid triggering the shutdown procedure by accident, this third position is not locked, so the switch will always flip back from it if not held in place. For further safety, the ACPI signal is only sent to the computer after being held in this position for five seconds. The box includes the Keyrah V3 circuit board and a printed manual. USB cable is not included. PCB colour will vary.
£49.99 Ex. VAT Add to basket
Amiga Capacitor Kit A1200 A600 CD32
Amiga A600 Capacitor Kit Polymer (Premium)
Amiga A600 Capacitor Kit Polymer (Premium). Polymer capacitors compared to the 'standard' liquid electrolyte capacitors, organic polymer is a solid electrolyte, so these capacitors will never leak. These types are still within the Commodore specification compared to other type of capacitors that are used like tantalum or polymer tantalums which should be avoided. We only use quality capacitors and use these in our own Amiga A600 premium recapping service.
  • Complete set of capacitors for Amiga 600 mainboard
  • Compatible with both PAL and NTSC models
  • Compatible with 1.1,1.3, 1.5 and 2B revisions

Package includes:

  • Full set of SMD and through hole capacitors.
  It is assumed the right tools and techniques are used in replacing capacitors as we cannot accept any responsibility for any damage to your board using our Amiga A600 Capacitor Kit. If your an sure we offer a range of Amiga recapping services including fixs and ultrasonic cleaning, contact us for any further information or search Amiga recapping services   Image for illustration only    
£16.66 Ex. VAT Add to basket