- You cannot add "Amiga 600 Gotek Drive, Printed Mount, OLED Display and FlashFloppy" to the basket because the product is out of stock.
AmiKIT for PiStorm and Pistorm32 (RPi 3A+, CM4 & RPi4 B)
£41.66 Ex. VAT
AmiKit for Pistorm and PiStorm32 is a pre-installed full workbench environment for the Commodore Amiga A500 A500 Plus, A600, A1200 and A2000 equipped with a Pistorm A500, Pistorm A600, PiStorm32-Lite or PiStorm32-Lite CM4. The SD card is packed with over 400+ classic Amiga programs and games. This version has been has been optimised for the PiStorm and It transforms your Amiga workbench interface in to a highly colourful, high resolution RTG desktop perfect for any HDMI monitor!!
Checkout this video
What you need:
- AmigaOS 3.2 ADF Files (Licenced AmigaOS 3.2 is available here)
- AmigaOS 3.2.2 update (available free from Hyperion’s website once you register AmigaOS 3.2)
- AmigaOS 3.2.2.1 hotfix (again available free from Hyperon)
- Picasso96 drivers from Aminet
- Internet connection from your Amiga (to register AmiKit on AmiKit Servers) using a PCMCIA WiFi or LAN card, Plipbox etc. There is a 15min demo of Roadshow TCP/IP stack included.
-
Full HD 1920×1080 monitor (or at least HD 1360×768) for RTG desktop plus a second Amiga monitor for 15kHz native modes like PAL/NTSC (or just one monitor with multiple inputs or a suitable video upscaler like the Indivision AGA MK3 for the A1200 allowing 15kHz modes on modern monitors)
What’s included
- 64GB MicroSD Card preloaded with AmiKit for PiStorm.
- Metal case for for 2 SD and 4 microSD cards.
- MicroSD to SD card adapter.
- Licence key to register with AmiKit
Full installation guide is here including how to register your copy of AmiKit.
Recommended Specs:
Amiga 1200 with PiStorm32-lite & Raspberry Pi 4B (1GB+ RAM) or CM4 or at least RPi3; with heatsinks + ideally a cooling fan
Minimum Specs:
Amiga 500/600/2000 with PiStorm & Raspberry Pi 3A+ or 3B+ or Zero2W; with heatsinks + ideally a cooling fan
You may also like…
PiStorm600 Adaptor for Amiga A600
Key Features
- Emulate 68010,68020,68030,68040,68060 Processors with or without FPU
- 128Mb Fastram.
- File-based SCSI device.
- RTG graphics from the Pi itself.
Notes:
Powering the A600/PiStorm It is possible if you have a weak PSU or the Amiga 600 has not been recapped you may see instability issues as with any accelerator, you have a few options all of which are available below, If your using a Pi Zero2 then it is unlikely you will need to apply additional power. A Pi 3A+ can consume more power, but this is not often an issue until you start connecting USB devices, you have a few options below:- You can add extra power via a floppy power connector splitter (available below) which is a new cable which splits the floppy power to power both your internal floppy drive and the PiStorm via its built in Molex connector (DO NOT ADD POWER OTHER THAN FROM THE AMIGA ITSELF OR TRY AND USE IT TO POWER OTHER DEVICES).
- Make sure your Amiga has been recapped, we offer 2 options Standard and Premium.
- Purchase a new Amiga PSU of which we also offer 2 versions, A600 Standard PSU or A600 Boost PSU which also as a 5VDC line adjustment to give a perfect 5 Volts to the Amiga 600.
*Using the Raspberry Pi Zero Model 2 is possible as mentioned but you do lose a little in performance.
[space_40]PiStorm32 Lite A1200 with RPi 3A+, 64Gb SD Card
- PiStorm32-Lite A1200 Adaptor
- Raspberry Pi 3A+ Module
- 64Gb SD Card (Pre-installed kernel with EMU68) You will need a copy of Workbench 3.0 or above and a kickstart rom again 3.1 or above or send us an SD image and we will install and setup FOC.
- 3D printed RPi header protector
NOTE: This is a open source project and will require some knowledge of the Amiga. The PiStorm adaptors are professionally manufactured, and a contribution to the developer is made.
PiStorm32-Lite CM4, Expansion Breakout & 64Gb SD Card Bundle
- Pistorm32-Lite adapter
- CM4 Adapter (Allows connection of Expansion Breakout and Compute Module 4)
- Raspberry Pi CM4 module with Wifi (Supports AmiKit also)
- Passive Cooler
- Expansion Breakout that provides HDMI, USB and Ethernet Ports
- SD Card 64GB Sandisk Ultra (pre installed EMU68 on 200MB partition) Optional upgrade to AmiKit Pistorm edition*
- Flex wire 40 Pin 20cm
- Printed IO cover (3D printed)
Now with an added option of AmiKit and AmigaOS 3.2.2 plug and play options*. Now with WiFI**!
NOTE: The PiStorm32-Lite CM4 product is a open source project and will require some knowledge of the Amiga. *AmiKit Pistorm Edition requires AmigaOS 3.2 installation disks (ADF) and an internet connection, full details here. ** Wifi (wifipi.device) is still in alpha, which means that it can (and will) contain bugs. For this version you need to set up an unencrypted 2.4GHz wireless network (without a password). However, you can hide it in your router settings so that no one else can see it and connect to it. Future versions will bring WPA/WPA2 encryption.
PiStorm Adaptor Amiga A500 – A500 Plus
- Raspberry Pi model 3A
- 32Gb SD Card configured to boot in to WB
NOTE: This is a community project and will require some knowledge Amiga. We DO NOT provide any support for getting this product running, but support is available via the following Discord channel https://discord.com/invite/j6rPtzxaNW Also this product is still in BETA and while compatibility is very high, updates are always being released to increase compatibility with software and games. We do sell refurbished Amiga A500 and A500 Plus's which can have a PiStorm installed tested and running. Also we can add a PiStorm installation as part of any Amiga A500 or A500 Plus Service. We support developers and a percentage of the purchase price of the PiStorm adaptor is given to Claude Schwarz The PiStorm adaptors are professionally manufacture and are RoHS compliant. STOCK ARRIVING W/C 11th November 2024
Related products
Amiga A600 Keyboard Membrane (New) GREEN
- The A600 Blue Keyboard Membrane - available here
- The A600 Green Keyboard Membrane (model number 56C47A or 56C471A - maybe stamped A300-A)
- The A600 Green Keyboard Membrane (model number 56C47B or 56C471B - maybe stamped A300-B)
- Check the ribbon is inserted all the way in the connector on the Amiga A600 mainboard.
- If it's only 1 or two keys the plunger may need a clean, strip down the keyboard and clean the plunger with some IPA.
- If it's a whole row of keys missing its a very strong possibility that the membrane on your needs replacing.
- The final step is to trim off 1mm of the connector (the ribbon end that plugs into the A600 mainboard).
A630 REV 2 Accelerator Turbo Card A600 NO CPU
- 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
Amiga 600 Gotek Drive, Printed Mount, OLED Display and FlashFloppy
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
Sum A600 USB Keyboard Adaptor
Key Features of the Sum A600
- Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
- A600 compatibility (U7 chip-attached).
- Built-in USB stack.
- Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
- Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
- Built-in EEPROM memory enabling user preferences storage.
- "Bootloader" function allowing future firmware upgrades.
- "Status" indicator LED providing information about device's state.
- built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
- Non-blocking keyboard A600 - You can still use the inbuilt A600 keyboard.
Entering configuration mode (R-Shift + Pause)
- F1 - RESET type - software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
- F2 - mapped Amiga Right to Alt Right,
- F10 - view keycode (on / off),
- F12 - display configuration
Amiga keys | USB keyboard |
---|---|
Amiga reset | CTRL + L-Win + R-Win CTRL + L-Alt + R-Alt CTRL + L-Alt + Del |
Help | F12 |
L-Amiga | L-Win |
R-Amiga | R-Win |