Back to Amiga A600
A630 REV 2 Accelerator Turbo Card A600 NO CPU
£83.33 Ex. VAT
A630 Rev 2 Accelerator Turbo Card (NO CPU VERSION) for the Amiga 600 is a modern turbo card allows you to add your own 68030 CPU. We have tested both the Gold top and ceramic versions, however we do recommend a CPU cooler and fan for the ceramic versions. The speed boost is the sweet spot for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost!
Full specs:
- 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib’s for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:
3.1 Kickstart:
http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme
3.2 or 3.2.1
Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.
Notes:
- Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
*2Mb Chip ram is strongly recommended for WHDLoad which is available here
PCB colour will vary.
OUT OF STOCK
You may also like…
Amiga A600 Recapping Service (Standard)
Amiga A600 Recapping Service. All board revisions (1.1,1.3,1.5,2B,2D). NOTE this is NOT a repair service.
- Check of the board before recapping is begun (any faults found before recapping will be reported back)
- Removal of existing capacitors (both SMD and radial capacitors).
- Cleanup and preparation of area.
- Replace using either Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, CF Card boot).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
AmigaOS 3.2 CD-ROM Package for ALL Commodore Amigas
AmigaOS 3.2 CD-ROM for all Commodore Amiga's which includes (UPDATED APRIL 2025)
- A500 / A500 Plus
- A600
- A1000
- A1200
- A2000 / A1500
- A3000 / A3000T
- A4000 / A4000T
- CDTV*
Some of AmigaOS 3.2 features
- ReAction GUI toolkit integration
- Built-in ADF (Amiga disk file image) management
- Integrated Help subsystem
- Updated Data Type system
- Workbench and other user interface improvements
- Improved Tools, Utilities and System applications
- Enhanced Shell behavior
- New and reworked command set
- Touched up Preferences
- Polished MultiView
- Revamped Commodities
- Expanded BootMenu
- Inclusion and refinement of the AmigaOS 3.1.4 feature set
- Flexible delivery media
- Many more features to be listed
Minimum hardware requirements
- Kickstart ROM 3.2 (recommended), 3.1.4 , or older 3.1
- 2 MB of total memory. Total memory is calculated by adding Chip RAM and Fast RAM. Consider an additional half megabyte if you are not using a physical Kickstart ROM 3.2.
- 10 MB of free hard disk space.
AmigaOS 3.2.3 (Released April 2025)
AmigaOS 3.2.3 is available free of charge from the Hyperon website for those that have registered their copy of AmigaOS 3.2 via the Hyperon website. Here are the highlights of the new features and fixes of AmigaOS 3.2.3:- ReAction classes have received numerous updates.
- TextEditor now allows users to define a custom menu with macros.
- 12 KB of chip RAM is no longer reserved.
- A new Kickstart 3.2.3 ROM.
- At least 50 other fixes, including updates to DiskDoctor and HDToolbox.
AmigaOS 3.2.3 Roms
3.2.3 is a good step upgrade and it is recommended when you upgrade to 3.2.3 you also upgrade your roms to 3.2.3. We are proud to be an official Hyperion reseller.
Amiga A600 1Mb Chip Ram Memory Expansion
Amiga A600 1Mb Chip Ram upgrade fits in the trapdoor of the Amiga 600. These cards are brand new and perfect in giving your Amiga 600 a little boost and compliments the Amiga 600 8Mb Fast ram upgrade as 2Mb chip ram is recommended if your looking to start using WHDLoad.
What is WHDLoad?
WHDLoad is a a solution where by the user can install hundreds of Amiga games on to a HDD/CF or SD card even if the game originally did not have the option of installing the game on to the internal HDD/CF/SD card. The vast majority of games have already been converted ready to go or you can create them yourself if you have the original game on a floppy disk/s. Also many great Amiga demos have been converted for WHDLoad.
1 Year RTB Warranty.
Commodore Amiga PSU for A600
Commodore Amiga PSU for A600, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga A600 Recapping Service (PREMIUM)
Amiga A600 recapping service (Premium) using hybrid polymer capacitors (these never leak again!), all board revisions. NOTE this is NOT a repair service.
- Check of the board before recapping is begun (any faults found before recapping will be reported back)
- Removal of existing capacitors (both SMD and radial capacitors).
- Cleanup and preparation of area.
- Replace using either Panasonic/Wurth/KEMET polymer capacitors.
- Retest (Video, Audio, Floppy Boot, CF Card boot).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.Related products
Tsunami 1230 Amiga 1200 Accelerator
PRODUCT DISCONTINUED
Tsunami 1230 Amiga 1200 Accelerator from Arananet which hosts a 68030 processor running at 42Mhz coupled with 64mb of fast ram, some say this is the spiritual successor to the classic Blizzard IV 68030 accelerator. The Tsunami 1230 Amiga 1200 is a brand new accelerator using modern 60EC030 CPU and modern ram.
The is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram add-on we sell for those that want that extra speed. 68882 PGA FPU can be added as an option below.
Full specs:
- 68EC030 QFP CPU at 42MHZ.
- 64MByte of fast-ram.
- 68882 FPU footprint ready and also selectable clock for overclocking the FPU. (FPU/Oscillator/Sockets NOT INCLUDED - OPTIONS BELOW)
- External expansion port for future upgrades (secret stuff, can’t tell)
- Clockport port (RTC only).
- Compatible with any A1200 motherboard revision.
- Fits in your old/new stock A1200 case!!!
- A1100 friendly of course!
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
Amiga A600 8Mb Fast Ram PCMCIA switchable
Amiga A600 8Mb Fast Ram Card is PCMCIA switchable using a physical jumper to switch from 8Mb to 4Mb Perfect for WHDLoad, Its tiny size makes it the smallest 8Mb fast ram card for the Amiga 600.
- ON/OFF - You can enable or disable the card.
- 4Mb/8Mb jumper
- Transferring files from your PC/MAC using the a PCMCIA CF card adaptor
- Plug in a Ethernet card to transfer files from a PC/MAC via FTP
- Adding a CD Drive that has a PCMCIA interface
Amiga A1200 Memory Expansion 11Mb
Amiga A1200 11Mb memory expansion card upgrades your Amiga A1200 with 11Mb of additional ram which is perfect for WHDLoad or just want a little boost! The Ex1T card is installed on the expansion port accessible through the trapdoor located under the Amiga 1200. Once in place your Amiga will be 2/3 times faster than the original base model, thanks to the modern memory being used.
The card can also be configured by a jumper or software with the following configurations:
- 5.5MB will be always available,
- Additional 4MB which can be activated / deactivated via switch or software (Not PCMCIA compatible),
- Additional 1.5MB software activated (Compatible with Amiga OS 3.0, 3.1 and 3.2 but not compatible with Amiga OS 3.1.4 due to a bug)
xT Accelerator Amiga 600, 28Mhz CPU, 11MB Fastram
xT Accelerator Amiga 600 with an onboard 28Mhz CPU with 11MB Fastram is one of the smallest and slimmest accelerator cards for the Amiga 600 computer, with some extra skill you can also fit the original HDD sled to it.The card is mounted on top of the MC68000 PLCC68 processor. All configuration options are available in the CLI.
Full specs:
- CPU MC68SEC000AA20, clocked on 28MHz.
- 11MB Fast Ram.
- MapROM Feature.
- PCMCIA Friendly - Ram needs to be set to 4MB.
- Embedded hardware DriveSWAP DF0/DF1 (Boot Selector).
Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1.
- PCB Colour will vary