Atari ST PSU for Atari 520ST & 260ST
Atari ST PSU is a 50W strong, modern replacement power supply unit for Atari 520ST and 260ST computer systems using external power supply. PSU provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic Atari ST external PSU replacement on the market. Can be upgraded to adjustable version offering 5VDC voltage fine tuning to set exact 5VDC for your particular system. The one and only absolute industry standard using the Mean-Well’s RPT-60B as a base component.
Key features:
- ATARI 520ST, 520ST+, 260ST, 260ST+ compatible
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with round DIN 7-pin female plug
- Detachable input AC cable for all versions
- Weight only 0.4 KG (2x less than original Atari ST PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning!
Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it’s not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.
ZX Spectrum PSU for +2A, +2B, +3 NEW
ZX Spectrum PSU for +2A, +2B, +3 is a modern, 50W strong, replacement power supply unit.
Refurbished Atari 1040 STE
Refurbished Atari 1040 STE.
Technical Specifications
- Motorola 68000 (8Mhz) CPU
- 1024Kb Ram (Standard)
- 3.5″ Floppy Drive
- UK Layout Keyboard
- TOS V1.62
What’s included?
Professionally refurbished (motherboard and PSU recapped) Atari 1040 STE inc Power lead (power cable will have correct plug depending on where its being sent).
What is Refurbished?
The Atari STE mainboard has been professionally recapped and is then thoroughly inspected and tested including:
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and deep cleaned.
We can also perform any of the following Atari STE fixes if required or upgrades, ask for further details.
- 10K pull up resistor network to the DMA databus.
- 1772 Pull up Resistors added.
- STE Video Ghosting Fix Applied.
- STE Reset fix 22uF added across C100.
- Bus resistors replaced with 2.2k resistor arrays.
- TOS Upgrades.
- RAM upgrades
- Internal Gotek Drives
Worldwide shipping available simply contact us for a shipping quote.
Images of the Atari STE for illustrative purposes only, each unit will show signs of age and use.
Macintosh Classic II Recapping Service (Premium)
Macintosh Classic II recapping service (Premium), all board revisions, all electrolytic capacitors are replaced. The Macintosh Classic logic board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh Colour Classic needs to be in working order.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace all surface mount capacitors using polymer (non leaking) capacitors.
Amiga A2000 Recapping Service (Standard)
Amiga A2000 recapping service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Want to know more about recapping, check out our FAQ’s
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout.
To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the ‘Request a quote‘ link.
You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the ‘Complete your order‘ within the email. There is no need to leave the checkout page open your web browser.
Amiga 3000 Recapping Service (Standard)
Amiga 3000 capacitor replacement service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using quality capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present)
Please send motherboard with daughter board.
A630 Accelerator Amiga A600 68030 50Mhz, 128Mb, FPU PURPLE
A630 Accelerator Amiga A600 68030 50Mhz inc FPU PURPLE EDITION is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 – synchronous or asynchronous clocking.
- 128MB SDRAM Fast Ram.
- Cooling: Active included.
- PCMCIA Friendly.
- PCB Colour – Purple
Important Information:
MMULib’s for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:
3.1 Kickstart:
http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme
3.2, 3.2.1 or 3.2.2
Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.
Notes:
- Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
*2Mb Chip ram is strongly recommended for WHDLoad which is available here
TF1260 A1200 Accelerator 68060 50MHz CPU/FPU/MMU
TF1260 Terriblefire A1200 Accelerator with XC68060RC50 50Mhz CPU which includes full FPU and MMU hosts 128Mb Fast Ram, IDE connector.
Refurbished Atari Falcon 030 Computer
Refurbished Atari Falcon 030
Technical Specifications
- Motorola 68030 (16Mhz) CPU
- 4Mb Ram
- 3.5″ 1.44mb Floppy Drive
- QWERTY Keyboard Layout
Optional fixes/upgrades – Contact us for a quote:
- NVRAM/RTC replacement module installed
- Clock patch module
- 14Mb Ram upgrade
What’s included?
- Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
- Recapped both motherboard and PSU.
What is Refurbished?
The Atari Falcon mainboard has been professionally recapped deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected and tested including:
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.
Worldwide shipping available simply contact us for a shipping quote.
Images of the Atari Falcon for illustrative purposes only, each unit will show signs of age and use. Please contact us for photos of the units we currently have
Macintosh SE/30 Recapping Service
Macintosh SE/30 recapping service, all board revisions, all electrolytic capacitors are replaced.
Amiga A4000 Recapping Service (Standard)
Amiga A4000 recapping service, all board revisions, NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout.
To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the ‘Request a quote‘ link.
You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the ‘Complete your order‘ within the email. There is no need to leave the checkout page open your web browser.