icomp
Showing all 7 results
- You cannot add "Commodore C64 and C64c Case New Black" to the basket because the product is out of stock.
ACA500Plus Individual Computers Amiga A500 A500 Plus
ACA500plus for the Amiga A500 and A500 Plus is the successor to the popular ACA500. The ACA500plus is an external expansion which is plugged to the left expansion port of your A500 or A500+. There is no need to open the computer at any time. This includes a new revolutionary method that can turn your 512k trapdoor memory expansion into chipram! If your Amiga is equipped with an ECS Agnus chip and said internal 512k memory expansion, you can turn your computer into a 1MByte-Chipram computer, just by selecting a menu item in the configuration menu of the ACA500plus! A lot of stock A500 computers with board revision 6 or higher have this exact configuration.
The ACA500Plus houses a MC68HC000 processor clocked at 14.1MHz as standard, This will give your computer more than a double-speed boost. If that's not enough, you can choose overclocking to 21, 28 or even 42MHz. Overclocking success is not guaranteed. By attaching an ACA12xx or Blizzard 12xx accelerator, you can make your A500 faster than a stock A3000.
The ACA500plus comes with essential software pre-installed in it's large flash. This includes fully licensed Kickstart versions V1.2 and V1.3 for backwards-compatibility, and Kickstart V3.1. You can install a fresh copy of Workbench 3.1 using the built in installer which is included within the ACA500Plus. All you need is an empty CF card, and you can install OS3.1 with a few key presses. After that's done, you can use the second CF card slot to exchange data with a modern PC: The ACA500plus supports PC-formatted cards and long filenames out of the box, no special installation required.
CF cards are handled like hard disks on the Amiga-side. You can use HDtoolbox or HDinsttools - whatever you prefer. Even the two popular 64-bit addressing modes are implemented: Both TD64 and NSD64 command sets are supported, so whatever your preferred filesystem requires, you can use it on your ACA500plus setup to access flash cards that are larger than 4GBytes. Speed-wise, the CF card slots are faster than most hard disk controllers that are available for other Amiga computers. The ACA500plus even outperforms the SCSI controller of an A3000!
Many users will want to use the ACA500plus with the popular WHDload software, which lets you install games on CF cards instead of swapping floppy disks if you want to play a different game. WHDload lists the 68010 processor as a minimum requirement for using the Quit-key and return to the Amiga's Workbench. The ACA500plus has special circuitry that lets you use the WHDload quit-key at any time, although you "only" have a 68HC000 processor. This is supported by WHDload V17.2 and higher.
Advanced floppy control: If your computer has a defective or even a missing floppy drive, the ACA500plus can handle this. With the built-in "boot selector" circuitry, you can turn an external drive into a fully-compatible df0: drive. In addition to that, the floppy control functions allow you to make external drives invisible, although they do not have an off-switch. This saves you the work of (un)plugging drives in order to make older floppy-based software compatible.
The ACA500plus features three expansion ports:
- A1200-compatible clockport
- local 16-bit expansion port
- A1200 CPU card connector
- ACA500plus with DisMo, 68HC000, 8MB RAM, 8MB Flash
- Short instruction manual German/English
- Kickstart V1.2, V1.3, V3.1
- Full OS3.1 disk set with fully automatic installer
- Action Replay 3 (patched for ACA500plus)
- HRTmon
- Thor's 040/060 libraries as resident modules
- Thor's mmu and memory libraries
- Network software, TCP/IP Stack for X-Surf-500
Commodore C64 Case (and C64c) NEW Breadbin Gray
Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.
"Breadbin Gray" color scheme - the color used for the "breadbin" cabinets between 1982 and 1986.
Package includes:
- Top half of case with sticker applied
- Bottom half case without sticker
- Two rubber stands, ten self-tapping plastic screws
- User guide (colour printed)
Commodore C64 and C64c Case New Black
Commodore C64 or C64C brand new cases. If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.
"Retro Black" colour scheme following the colours of the Commodore 264 series (C16, C116 and Plus/4 computers).
Package includes:
- Top half of case with sticker applied
- Bottom half case without sticker
- Two rubber stands, ten self-tapping plastic screws
- User guide (colour printed)
- White box with "Commodore" logo stickers
- Shipping includes outer (brown) box
Commodore C64 C64C Case Brand New Transparent
Commodore C64 or C64C brand new cases. If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.
"Retro Black" colour scheme following the colours of the Commodore 264 series (C16, C116 and Plus/4 computers).
Package includes:
- Top half of case with sticker applied
- Bottom half case without sticker
- Two rubber stands, ten self-tapping plastic screws
- User guide (colour printed)
- White box with "Commodore" logo stickers
- Shipping includes outer (brown) box
Commodore C64 Case (and C64c) NEW SX-64 Style
Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.
"SX-64" color scheme following the look of the SX-64 portable computer with a two-tone case.
Package includes:
- Case top half with sticker applied, Umbra grey
- Case bottom half without sticker, metallic-look
- Two rubber stands, ten self-tapping plastic screws
- User guide (colour printed)
Commodore C64 Case (and C64c) NEW Breadbin Classic Beige
Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.
"Classic Beige" color scheme - the color used for the "breadbin" cabinets between 1982 and 1986.
Package includes:
- Top half of case with sticker applied
- Bottom half case without sticker
- Two rubber stands, ten self-tapping plastic screws
- User guide (colour printed)
- Shipping includes outer (brown) box
ACA1221LC 16Mb 68EC020 26.67Mhz Accelerator Amiga A1200
ACA1221LC accelerator Amiga A1200 and ACA500Plus comes with the 68EC020 processor (guaranteed to run at 26.67MHz) and 16MBytes physical memory. 11.2MBytes of this physical memory can be used as fastmem, and 1 MByte is reserved for a fast copy of the Kickstart ROM. The CPU speed can be switched in four steps between 14MHz and 40MHz. Overclocking the card beyond 26.67MHz will require active cooling and a very good power supply like the A1200 Boost PSU or the highly specced CA-PSU ; operation at this high speed is not guaranteed.
The ACA1221lc features iComps IDE speeder technology that accelerates reading from the internal IDE port, this IDE speeder does not require opening the computer or even removing chips from their socket. The IDE speedup to PIO mode 3 is activated with a software setting and reaches a raw data transfer rate of 10.2 MBytes per second, which results in every-day performance of 3.6MBytes/s with fast CF cards. Fast hard drives with cache may exceed 7MBytes/s performance. The IDE speeder feature is not available if connected to an ACA500 or ACA500plus.
The ACA1221lc is prepared for use with our forthcoming ACA2000, where it will provide up to 11.9MBytes of fastmem. More memory configurations allow for using Zorro cards without conflicts.
ACATool is required to unlock some of the features like:
- MapROM - Load up other kickstart roms like AmigaOS 3.2 without the need of physical ROMS
- Loading of the onboard Kickstart ROM file without losing valuable RAM
- Control the IDE speeder,