Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 recapping service (Premium) using hybrid polymer capacitors (never leak again!), all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either polymer Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
 £ 45.83 Excl. VAT Select options
Amiga 1200 Mainboard recapped
Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check the board before recapping is begun (any faults found before recapping will be reported back).
  • Removal of existing electrolytic capacitors both SMD and through hole.
  • Cleanup and preparation of areas.
  • Replace using quality electrolytic capacitors.
  • Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).
Common issues recapping may solve:
  • Bad audio, missing channels, low volume
  • Slow boot up
  • Guru errors or random crashing
[space_20]
When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]    
 £ 29.16 Excl. VAT Select options
Refurbished Amiga A1200
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 14/21 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]   Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping Worldwide shipping available simply contact us for a shipping quote.     Important Notes:  
  • Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
  • As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
  • Deposits are not refundable
  • No software warranty or support is provided, any software included is sold as seen.
     
 £ 499.99 Excl. VAT Select options
Amiga 1200 Mainboard Recapped with modulator removed
Amiga 1200 Recapping, Modulator, Timing Fix (Standard)
Amiga 1200 capacitor replacement service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using quality Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot)
  • FREE return postage of your recapped board.
 
 £ 37.00 Excl. VAT Add to basket
Amiga 1200/600/4000 IDE Header Replacement
Amiga 600/1200/4000 IDE Header Replacement
Amiga 600/1200/4000 IDE Header (Socket) Replacement This service replaces the 44pin IDE header on an Amiga 1200 with a brand new socket. Price includes FREE UK return shipping.
 £ 16.99 Excl. VAT Add to basket
Amiga A1200 Motherboard Refurbished
Amiga A1200 Motherboard – Refurbished
Amiga A1200 motherboard fully refurbished (various motherboard revisions). Each A1200 motherboard is professionally refurbished and has had the following work completed:
  • Tested before any work has began.
  • All electrolytic capacitors removed using professional tools and techniques (no twisting off caps and boards a pre-warmed before the removing capacitors using hot air) this puts far less stress to the board itself.
  • Pads cleaned with flux/wick/IPA.
  • New electrolytic capacitors installed using our premium polymer capacitors.
  • Modulator removed.
  • Timing fix applied for ACA , TF1230, TF1260 Accelerator Cards.
  • Board retested - Video (composite and RGB), Audio, CIA, Floppy, IDE, Parallel, Serial, Mouse, Joystick, DF1.
  • Board ultrasonic cleaned at 60 degrees using deionised water and professional PCB flux cleaner and then dried.
  • Board tested again and tested for a minimum of 4 hrs playing a rolling demo.
  What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: https://youtu.be/m4mbKPySfLE   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]     Worldwide shipping available simply contact us for a shipping quote.    

Images of the Amiga 1200 motherboard is for illustrative purposes only and are PAL, each unit will show signs of age and use. If you want photos of the Amiga 1200 motherboards we have please contact us.

 £ 329.99 Excl. VAT Select options
Commodore Amiga PSU Duo Plus
Commodore Amiga PSU for 2 x A500/600/1200 (DUO PLUS)
Commodore Amiga PSU DUO EDITION PLUS for 2 x A500/A600/A1200 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel forregular and accelerated Commodore Amiga A500, A500+, A600 and A1200. The new Amiga PSU DUO Edition is a modern, 65W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
  • Stabilized +12VDC up to 1.0A rated output (per channel)
  • Stabilized -12VDC up to 0.15A rated output (per channel)
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
  • Double over current protection for all output lines
  • Main AC power On/Off switch
  • Two channel On/Off switches
  • Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
  • Eco friendly, green design: consumes ~20% less power compared to original PSU set
  • Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
  • Detachable AC cable (allowing you to use your own desired cable length).
  • Weight only 0.3 KG
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 124.99 Excl. VAT Read more
Commodore Amiga PSU Duo Plus
Commodore Amiga PSU for 1 x A500/600/1200 1 x CD32/A590 (DUO PLUS EDITION)
Commodore Amiga PSU DUO EDITION PLUS for 1 x A500/600/1200 and 1 x CD32/A590 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel for regular and accelerated Commodore Amiga A500, A500+, A600 and A1200. The new Amiga PSU DUO PLUS Edition is a modern, 65W strong replacement power supply unit for the Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
  • Stabilized +12VDC up to 1.0A rated output (per channel)
  • Stabilized -12VDC up to 0.15A rated output (per channel)
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
  • Double over current protection for all output lines
  • Main AC power On/Off switch
  • Two channel On/Off switches
  • Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
  • Eco friendly, green design: consumes ~20% less power compared to original PSU set
  • Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
  • Detachable AC cable (allowing you to use your own desired cable length).
  • Weight only 0.3 KG
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 120.83 Excl. VAT Add to basket