ACA1221LC 16Mb 68EC020 26.67Mhz Accelerator Amiga A1200
ACA1221LC accelerator Amiga A1200 and ACA500Plus comes with the 68EC020 processor (guaranteed to run at 26.67MHz) and 16MBytes physical memory. 11.2MBytes of this physical memory can be used as fastmem, and 1 MByte is reserved for a fast copy of the Kickstart ROM. The CPU speed can be switched in four steps between 14MHz and 40MHz. Overclocking the card beyond 26.67MHz will require active cooling and a very good power supply like the A1200 Boost PSU or the highly specced CA-PSU ; operation at this high speed is not guaranteed.
The ACA1221lc features iComps IDE speeder technology that accelerates reading from the internal IDE port, this IDE speeder does not require opening the computer or even removing chips from their socket. The IDE speedup to PIO mode 3 is activated with a software setting and reaches a raw data transfer rate of 10.2 MBytes per second, which results in every-day performance of 3.6MBytes/s with fast CF cards. Fast hard drives with cache may exceed 7MBytes/s performance. The IDE speeder feature is not available if connected to an ACA500 or ACA500plus.
The ACA1221lc is prepared for use with our forthcoming ACA2000, where it will provide up to 11.9MBytes of fastmem. More memory configurations allow for using Zorro cards without conflicts.
ACATool is required to unlock some of the features like:
- MapROM – Load up other kickstart roms like AmigaOS 3.2 without the need of physical ROMS
- Loading of the onboard Kickstart ROM file without losing valuable RAM
- Control the IDE speeder,
And much more!
Atari Mega STe PSU Recapping Service
Atari Mega STe 1000 PSU recapping service – NOTE this is NOT a repair service.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using quality capacitors.
- Test output voltages (not under load)
Recapping the Atari STe PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on.
All that needs to be sent is the Atari Mega STe PSU itself.
Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209.
The unit was built from both new parts and recycled parts.
Macintosh Colour Classic II Recapping Service (Standard)
Macintosh Colour Classic II recapping service (Standard), all board revisions, all electrolytic capacitors are replaced. The Macintosh Colour Classic logic board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh Colour Classic needs to be in working order.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace all surface mount capacitors.
A1200 Case LED Board
A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.
Atari Falcon Recapping Service inc PSU
Atari Falcon recapping service including recapping of PSU, all board revisions. This service includes both recapping of the Atari Falcons’ motherboard and PSU.
- Check of the Falcon motherboard and PSU before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the Atari 520 STe / 1040 STE / 4160 STE
What do you need to send?
All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.
AmigaOS 3.2.3 A3000 ROM Burning Service
AmigaOS 3.2.3 A3000 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.2.3 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.
What you will receive:
- Physical AmigaOS 3.2.2 Kickstart HI ROM
- Physical AmigaOS 3.2.2 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be cancelled and funds will be refunded minus any processing fees (if PayPal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.
Alicia 1200 Amiga ITX Motherboard Fully Built
Alicia 1200 is the Amiga A1200 motherboard reimagined using the ITX form factor or is also known as Mini-ITX. This form factor is direct from the PC world which means there are many case options available. This is a fully built Alicia 1200 motherboard.
Indivision ECS V4 A600 Flickerfixer/Scandoubler
Indivision ECS V4 scandoubler/flicker fixer for the Commodore Amiga A600 with VGA output. This upgrade requires an A603, A604 or A604n memory expansion to function.
Macintosh Classic II Analogue Board Recapping
Macintosh Classic II analogue board recapping service, all board revisions, all electrolytic capacitors are replaced using high quality capacitors.
- Removal of existing capacitors.
- Clean-up and preparation of area.
We also offer a Apple Mac Classic II Logic Board recapping service.
NOTE this is NOT a repair service, the Apple Mac Classic II needs to be in working order – All we need is the analogue board to be sent.
A1200 FPU Upgrade (Onboard)
A1200 FPU upgrade (onboard) which includes socket, FPU and installation.
What does the modification do?
This FPU modification adds a real FPU to the A1200 motherboard, there has always been a place (U0) for an onboard FPU but it was never added. This is a perfect compliment for a stock A1200 or one with an accelerator without an FPU option, for example The TF1230 or any standard ram upgrade like the 11Mb Fast Ram upgrade. However there are a couple of limitations of adding an onboard FPU.
- The FPU will be using the CPU clock which is at 14Mhz, which means the FPU will be running at 14Mhz
- The FPU will be disabled if you use a 040 or 060 accelerator, for example TF1260. This is because both the 040 and 060 processors do not acknowledge external FPUs as you can get those processors with built in FPUs.
This modification is available as an option on our A1200 recapping service, ReAmiga 1200 and Refurbished units.
Checkout this Youtube video by Chris Edwards
Process of ordering:
Like our recapping service, you would need to send us your A1200 motherboard only. Once you have ordered you will receive an automated email with where to send the board and how to pack it.
Refurbished Commodore Amiga 500 Custom
Commodore Amiga A500 – Professionally Refurbished White Edition
Technical Specifications
- Motorola 68000 (7.14Mhz) CPU.
- 1Mb Ram (512k slow, 512k fast).
- 1.3 Kickstart Rom.
- Internal Gotek Drive with side OLED display
What’s included?
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
- Brand new A500 Case White
- Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished?
Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.
What is Ultrasonic cleaning?
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.
Want to add some upgrades?
We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Worldwide shipping available simply contact us for a shipping quote.