Services

Amiga A500 Cartoon Classics Reproduction Box
Amiga 500 Reproduction Box Cartoon Classics
Amiga 500 reproduction box - Cartoon Classics, these are brand new and designed to be used as box art or to house your Amiga A500. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 500 was shipped.
Key features:
  • Box is true to the original size and design.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 500 reproduction box and NOT AN ORIGINAL.  
£33.33 Ex. VAT Read more
Macintosh SE/30 Logic Board Recapped
Macintosh SE/30 Recapping Service
Macintosh SE/30 recapping service, all board revisions, all electrolytic capacitors are replaced. The Mac SE/30 board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh SE/30 needs to be in working order.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
Did you know?
The Macintosh SE/30 was released in the UK in 1989 which came with an 68030 Motorola CPU running at 16mhz. It came with either 1Mb or 4Mb ram which is upgradeable to 128Mb. The Mac SE/30 was discontinued in 1991 and was replaced with the Macintosh Classic II.  
£29.16 Ex. VAT Add to basket
Amiga 1200/600 Gotek Drive CLEAR
Amiga 1200 Gotek Drive, CLEAR/TRANSPARENT Mount, OLED Display and FlashFloppy
Amiga 1200 Gotek drive is a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga. You will need a USB memory stick (NOT included) with your loaded ADF files.
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
£42.99 Ex. VAT Read more
Amiga 4000 Recapped Board
Amiga A4000 Recapping Service (Standard)
Amiga A4000 recapping service, all board revisions, NOTE this is NOT a repair service.
  • Check of the board before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, SCSI (if HDD is present).
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
£49.99 Ex. VAT Add to basket
Amiga A1200 A500 mechanical Keyboard
Amiga A1200 Mechanical Keyboard A1200.NET
Amiga A1200 mechanical keyboard (also for Amiga A500) was developed by A1200.NET. The keyboard itself has been designed from the ground up and is fully compatible with the Amiga A1200, and Amiga A500 (with optional adaptor board) and is a direct plug-and-play replacement using the included ribbon cable for the A1200 and for Amiga 500 users the keyboard requires the optional Amiga 500 daughter-board, the controller mounts on the top right of the keyboard and connects via a custom U-shaped ribbon cable beneath the keyboard, then links to the A500 motherboard through a serial wire mirroring the original mounting location and ensuring perfect compatibility. Designed into the new Amiga A1200 mechanical keyboard is a modular controller bay, different daughter boards can be added to adapt the same base keyboard to various Amiga models thus allowing DIY modules to be developed by individuals or hardware enthusiasts. The keyboard is 100% compatible with the following: Motherboards and adaptors: Cases: Keycaps:  
  Amiga A1200 Mechanical Keyboard Contents:
  • Metal Body Armor
  • ISO Layout
  • Space Bar Stabilizer and FPC Ribbon cable included
  • Keycaps NOT included (available as an option below)
  Checkout this review of the prototype unit: [kad_youtube url="https://youtu.be/HNOTwb4UsCA?si=tAnp7ZaR7HExJAIX" ]        
£99.99 Ex. VAT Select options
Amiga A600 Junior Motherboard
Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added. A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
  • Corrected PCB layout, removed “nowhere” traces.
  • Main Vcc rails stronger.
  • Informative silkscreen. 
  • Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
  • CXA2075M Video Encoder
  • DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
  • R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
  • HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.
  Motherboard PCB, passive compoents arfe new, however the custom chips a some of the ports are recycled   ** A600 Junior board does not come with any metal shielding. or kickstart rom.   3 Month RTB Warranty.    
£499.99 Ex. VAT Read more
ACA1221LC Amiga A1200 Accelerator
ACA1221LC 16Mb 68EC020 26.67Mhz Accelerator Amiga A1200
ACA1221LC accelerator Amiga A1200 and ACA500Plus comes with the 68EC020 processor (guaranteed to run at 26.67MHz) and 16MBytes physical memory. 11.2MBytes of this physical memory can be used as fastmem, and 1 MByte is reserved for a fast copy of the Kickstart ROM. The CPU speed can be switched in four steps between 14MHz and 40MHz. Overclocking the card beyond 26.67MHz will require active cooling and a very good power supply like the A1200 Boost PSU or the highly specced CA-PSU ; operation at this high speed is not guaranteed. The ACA1221lc features iComps IDE speeder technology that accelerates reading from the internal IDE port, this IDE speeder does not require opening the computer or even removing chips from their socket. The IDE speedup to PIO mode 3 is activated with a software setting and reaches a raw data transfer rate of 10.2 MBytes per second, which results in every-day performance of 3.6MBytes/s with fast CF cards. Fast hard drives with cache may exceed 7MBytes/s performance. The IDE speeder feature is not available if connected to an ACA500 or ACA500plus. The ACA1221lc is prepared for use with our forthcoming ACA2000, where it will provide up to 11.9MBytes of fastmem. More memory configurations allow for using Zorro cards without conflicts.   ACATool is required to unlock some of the features like:
  • MapROM - Load up other kickstart roms like AmigaOS 3.2 without the need of physical ROMS
  • Loading of the onboard Kickstart ROM file without losing valuable RAM
  • Control the IDE speeder,
And much more!  
 
£124.99 Ex. VAT Add to basket
X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots
X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2. Key features:
  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module "RapidRoad"
Drivers can be downloaded from here. Manual here Wiki here Requirements:
  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga
Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don't allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking. Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used. Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the "swap" jumper. The X-Surf-100 is officially supported in the Linux-m68k kernel.    
£116.66 Ex. VAT Add to basket
Atari Mega STe PSU
Atari Mega STe PSU Recapping Service
Atari Mega STe 1000 PSU recapping service - NOTE this is NOT a repair service.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using quality capacitors.
  • Test output voltages (not under load)
Recapping the Atari STe PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on. All that needs to be sent is the Atari Mega STe PSU itself. [space_40]
£41.66 Ex. VAT Add to basket
Sega Mega Drive Recapping Service
Sega Mega Drive & Genesis Recapping Service ALL VERSIONS
Sega Mega Drive & Genesis recapping service inc Sega Genesis inc all board revisions including Mega Drive, Mega Drive 2. This service is a maintenance service and not a repair service however recapping can bring back to life your Sega console if it shows the following symptoms:
  • No image
  • Intermittent picture
The service includes:
  • Testing of Sega Megadrive/Genesis
  • Removal of through hole capacitors.
  • Any leakage cleaned up and prepped.
  • Replacement Electrolytic capacitors soldered in place
  • Final testing and video taken of unit working.
  Recapping can recover common issues however if it does not, the recapping service is still chargeable but will be reduced.
£37.49 Ex. VAT Read more
FM Towns Marty
FM Towns Marty Recapping Service
FM Towns Marty Recapping Service is where we replace all the electrolytic capacitors on the mainboard, PSU (both Tamura and Eastern PSU's are covered) and CD Drive. We would need the entire console and controller to be sent. We can also offer just the mainboard, PSU or CD Drive if needed, please by all means contact us. What's included:
  • Testing Video, Audio and CD Drive.
  • Full strip down of the unit.
  • Removal of all electrolytic capacitors on the Mainboard, PSU and CD Drive - Approx 53 capacitors.
  • Cleanup any capacitor leakage.
  • Replace with tier one brands of capacitors.
  • Test video, audio and CD Drive.
  • Reassemble and retest.
  We are able to recap both models.   Note: This is not a repair service  
£74.99 Ex. VAT Read more
A2000 Replica Motherboard
Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209. The unit was built from both new parts and recycled parts.    
£1,199.99 Ex. VAT Read more