Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 Recapping Service (PREMIUM)
Amiga A1200 recapping service (Premium) using hybrid polymer capacitors (never leak again!), all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check of the board before recapping is begun (any faults found before recapping will be reported back)
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using either polymer Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot, CF Card boot).
Want to know more about recapping, check out our FAQ's
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.  
 £ 45.83 Excl. VAT Select options
Greaseweazle v4.1 Amiga Amstrad, Spectrum
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer

Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)


Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:

  • Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
  • Buffered outputs, for communicating with older 5.25" and 8" disk drives
  • Integrated power connector for directly powering most 3.5" disk drives
  • Write-enable jumper can be removed for safer preservation of precious vintage disks
  • Supports flippy-modded 5.25" drives
  • Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
  • 3 user-definable outputs (eg. 8" interface REDWC signal)
  • 100% factory tested, and tested again by me before shipping

More information and documentation on the wiki page here:

This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:

  • A disk drive (for example a PC 3.5" or 5.25" drive)
  • A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
  • Floppy drive power cable, or power supply
  Built by Zero Flux Development. And yes this is the item mentioned on Tom's Hardware:  
 £ 19.16 Excl. VAT Add to basket
Amiga 1200 Mainboard recapped
Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
  • Check the board before recapping is begun (any faults found before recapping will be reported back).
  • Removal of existing electrolytic capacitors both SMD and through hole.
  • Cleanup and preparation of areas.
  • Replace using quality electrolytic capacitors.
  • Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).
Common issues recapping may solve:
  • Bad audio, missing channels, low volume
  • Slow boot up
  • Guru errors or random crashing
When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]    
 £ 29.16 Excl. VAT Select options
Refurbished Amiga A1200
Refurbished Commodore Amiga 1200 Unit

Commodore Amiga 1200 - Professionally refurbished

Technical Specifications
  • Motorola 68020 (14Mhz) CPU
  • 2Mb Chip Ram
  • 3.0 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  What's included?
  • Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).
  What is refurbished? Each Commodore Amiga 1200 mainboard is professionally recapped (standard or Polymer is available at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 1200 worked as it did when it first came from the factory back in the 1990’s, case and keyboard is stripped and cleaned but due to age may show signs of use. Each Amiga 1200 is refurbished to the customers specifications, with that in mind each unit can take 14/21 working days to prepare and test depending on demand.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="" ]   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]   Want to add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Scan doublers, Gotek drives etc. Ordering We only ask for a deposit and the rest upon completion. Shipping Worldwide shipping available simply contact us for a shipping quote.     Important Notes:  
  • Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
  • As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
  • Deposits are not refundable
  • No software warranty or support is provided, any software included is sold as seen.
 £ 499.99 Excl. VAT Select options
Replacement Amiga 500 PSU (Brand New)
Commodore Amiga PSU for A1200
Commodore Amiga PSU for A1200, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Key features:
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
  • Carefully calibrated for Amiga 500 reference load
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with rectangular DIN 5-pin plug.
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • Manufactured by Electroware
  • UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).    
 £ 45.83 Excl. VAT Read more
PiStorm32-Lite for Amiga A1200
PiStorm32 Lite A1200 with RPi 3A+, 64Gb SD Card
PiStorm32-Lite A1200 is the full package which includes:  
  • PiStorm32-Lite A1200 Adaptor
  • Raspberry Pi 3A+ Module
  • 64Gb SD Card (Pre-installed kernel with EMU68) You will need a copy of Workbench 3.0 or above and a kickstart rom again 3.1 or above or send us an SD image and we will install and setup FOC.
  • 3D printed RPi header protector
  Once installed and setup you will have an implementation of MC68020/030/040 with FPU support, coupled with a fast implementation of the Emu68 CPU unit (Emu68 is a JIT emulator) written by Michal Schulz, thanks to it the system boots in a few seconds. Extra functionality is added (thanks to an additional RPi 3A+ module) with an HDMI port, so you can have Full HD video and around 340MB of Fast Ram.   Check out this video by Capt. LeChuck, Pistorm32-Lite with EMU68K   [kad_youtube url="" ]   We also just sell the Pistorm32-Lite adaptor here, just add you own Raspberry Pi and SD Card.  
  NOTE: This is a open source project and will require some knowledge of the Amiga. The PiStorm adaptors are professionally manufactured, and a contribution to the developer is made.    
 £ 124.99 Excl. VAT Select options
PiStorm32-Lite for Amiga A1200
PiStorm32 Lite for Amiga A1200 Adaptor Only
PiStorm32 Lite Adaptor for the Amiga A1200 is designed to connect one of the Raspberry Pi's listed below (not included) NOTE: We do sell a plug and play package here which includes PiStorm32-Lite, Raspberry Pi 3A & SD Card. Once you add your own Raspberry Pi, setup an SD card and plug it in the trapdoor of the A1200 like all A1200 accelerators (TF1230 or TF1260) you will have an accelerated Amiga 1200!   Compatible Rasperry Pi's:
  • Raspberry Pi 3A
  • Raspbery Pi 3B
  • Raspberry Pi 4B
  Want to know more about the PiStorm check out the following link:   Compatible Rasperry Pi's:
  • Raspberry Pi 3A
  • Raspbery Pi 3B
  • Raspberry Pi 4B
  With the Pistorm32-lite the A1200 can go up to a 68040 and using a Pi4 you could see 2000 Plus Mips! Want to know more about the PiStorm check out the following link:   The PiStorm adaptors are professionally manufactured. and a contribution to the developer is made to support this project.      
 £ 70.83 Excl. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2.2 ROM Burning Service for Amiga A1200
AmigaOS 3.2.2 ROM Burning Service for Amiga A1200, within this service we will burn the Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 1200.
What you will receive:
  • Physical 3.2.2 Kickstart HI ROM
  • Physical 3.2.2 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
Note: It is not a requirement to have 3.2.2 ROMS We are proud to be an official Hyperion reseller.  
 £ 10.83 Excl. VAT Select options
FlashFloppy Gotek OLED Display Header
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive. The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install. What you will receive:
  • 3D Printed Header
  • OLED Display
  • 30cm of cable from the header to the Gotek drive.
 £ 11.66 Excl. VAT Read more
Amiga Gotek FlashFloppy OLED Header
Amiga 1200 Gotek Drive (Flashfloppy) with Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive. These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200. The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use. You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
  • OpenFlops Gotek Drive
  • 3D Printed Amiga 1200 Gotek Mount
  • OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek: Further information on what a gotek drive is can be found here    
 £ 37.49 Excl. VAT Read more
TF1230 Accelerator Amiga 1200 - Terriblefire
TF1230 Amiga Accelerator 128Mb – Terriblefire
TF1230 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
  • 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
  • 128Mb Fast Ram
  • IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
  • Fits in your old/new stock A1200 case!!!
  • Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
  • Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
  • Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
 £ 149.99 Excl. VAT Read more
Bifrost A1200 Heimdall Edition
BIFROST A1200 Heimdall Edition LED Replacement
Bifrost A1200 Heimdall Edition board is a direct keyboard LED replacement board for your Amiga 1200 computer. It uses some of the latest cutting edge technology to bring you an updated, fully feature packed and highly customisable cosmetic experience for your beloved retro computer, available literally at your fingertips. Customize the POWER-, FLOPPY- and HARDDRIVE LEDs to any colours and brightness of your choice using the LEDs themselves as programming buttons. You can also choose from pulsating effects as well as colour cycling effects. Each channel comes with three LEDs and all LEDs are individually programmable. All in all you will find that the A1200 Bifrost, can deliver over 150 million colour and brightness combinations to EACH channel making the Bifrost a great choice for putting that personal touch to your Amiga machine. The Bifrost also supports PCMCIA signal and/or up to three custom devices on separate input channels, utilizing a secondary indicator layer on each of the LED rows. Furthermore, it supports the new CAPS LOCK Bifrost module not allowing for any original lights to escape user customization.   What's included:
  • 1x A1200 Bifrost, Heimdall Edition
  • 1x A1200 CL Module
  • 1x 30cm 4-lead connection wire
  • 1x 30cm 1-lead connection wire
  • 1x Bleed Shield
  • 1x Diffuser Holder
  • 6x Normal Diffusers (3x for T1-, 3x for T2-cases)
  • 6x Tall Diffusers (3x for T1-, 3x for T2-cases)
  • 1x DIY PCMCIA enabling kit
  Below are a couple of videos demonstrating what you can achieve:  
A1200 Bifrost, Heimdall Edition - Demo
[kad_youtube url="" ]    
BIFROST A1200 Heimdall Edition - Advanced Mixing
[kad_youtube url="" ]   These units will fit any Amiga 1200 case including the A1200.NET cases we sell. Full manual on fitting and setting up is available here   Photo credits: Conny Larsson  - Product image Johnnathan Taylor  
 £ 66.66 Excl. VAT Read more