Amiga A1200
Showing 61–72 of 75 results
TF1230 A1200 Accelerator – NO CPU
TF1230 A1200 Accelerator (NO CPU) for the Amiga 1200 which hosts 64mb of fast ram and built in IDE port. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
Full specs:
- 128pin PGA socket ready for a genuine 68030 Gold Top CPU - MC68030RC50B (CPU NOT INCLUDED)
- 64MByte of fast-ram.
- IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
- Fits in your old/new stock A1200 case!!!
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1260 - 68060 Processor, 64Mb Ram and IDE Interface for the Amiga 1200
- TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
Amiga 1200 Gotek Drive, CLEAR/TRANSPARENT Mount, OLED Display and FlashFloppy
Amiga 1200 Gotek drive is a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga.
You will need a USB memory stick (NOT included) with your loaded ADF files.
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
GoDrive1200 Gotek for Amiga A1200 and A500
GoDrive1200 Gotek for Amiga A1200 and A500 is an upgrade that provides you both the use of your current internal floppy drive in the A1200 and A500 and also have access to a Gotek drive, so have the best of both worlds floppy drive and Gotek drive.
Features:
- Large 1.3” OLED screen
- Rotary encoder with switch
- Activity LED light
- Drive selector
- USB socket
- FlashFloppy Firmware
- Mitsumi D357T2,
- TEAC FD-235HF,
- Panasonic JU-253-043P
TF1260 A1200 Accelerator 68060 50MHz CPU/FPU/MMU
TF1260 Terriblefire A1200 Accelerator with XC68060RC50 50Mhz CPU which includes full FPU and MMU hosts 128Mb Fast Ram, IDE connector. The TF1260 is one of the best 060 accelerators you can purchase for the Amiga 1200 And is the next step up after the TF1230 A1200 Accelerator add-on we sell for those that want that large speed jump.
Full specs:
- XC68060RC50A REV1 CPU (the CPU has the MMU and FPU)
- 128MByte of fast-ram.
- IDE Interface - Driver required - ehide.device
- Compatible with any A1200 motherboard revision.
- Fits in your old/new stock A1200 case!!!
- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 - 68030 Processor 64Mb Ram and IDE interface for the Amiga 1200
- TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
- For every TF1260 sold we donate a percentage of the sale to Stephen Leary to support further TF card developments and we also support our builders.
- Timing fix is recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- At least Kickstart 3.1 is required - (Kickstart 3.0 is not supported)
- PCB colour will vary.
TF1260 TerribleFire A1200 Accelerator with LC060 50MHz CPU
TF1260 Terriblefire A1200 Accelerator with EC 50Mhz CPU which hosts 128Mb Fast Ram, IDE connector. The TF1260 is one of the best 060 accelerators you can purchase for the Amiga 1200 And is the next step up after the TF1230 A1200 Accelerator add-on we sell for those that want that large speed jump.
Full specs:
- MC68LC060 CPU (The CPU has no MMU or FPU)
- 128MByte of fast-ram.
- IDE Interface - Driver required - ehide.device
- Compatible with any A1200 motherboard revision.
- Fits in your old/new stock A1200 case!!!
- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 - 68030 Processor 64Mb Ram and IDE interface for the Amiga 1200
- TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
- For every TF1260 sold we donate a percentage of the sale to Stephen Leary to support further TF card developments and we also support our builders.
- Timing fix is recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- At least Kickstart 3.1 is required - (Kickstart 3.0 is not supported)
Amiga A1200 Case Badge – A1260 WARP
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
Amiga 1200 Accelerator or Ram Connector Replacement
Amiga 1200 edge connector replacement service will replace a broken edge connector on a wide range of amiga 1200 accelerators or ram cards, a few examples below:
- A1208 8Mb card
- Any generic Amiga 1200 8Mb card
- ACA Accelerator cards (ACA 1221, ACA 12xx, ACA 1230)
- Apollo Accelerators
Gotek Drive Pre-Flashed with FlashFloppy, a 0.96″ Display and Rotary Knob (Generic)
Gotek Drive 0.96" Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX.
This is the latest Gotek floppy emulator for retro computers with 3.5" floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3" disk drives or old PCs with 5.25" drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3).
Flashed with current latest FlashFloppy firmware and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.
Comes complete with Rotary select knob and large 0.96 OLED display screen
List of compatible devices:
[accordion]
[pane title="Computers"]
Acorn Archimedes
Acorn BBC Micro
Amstrad CPC
Amstrad PCW
Amstrad PPC
Atari ST
Commodore Amiga
DEC
Dragon
IBM 3174
IBM PC
IBM PS/2
Kaypro
Memotech
MSX
NEC PC-98
Sharp
Sinclair QL
Spectrum
Tandy Color Computer
TI-99/4A
TSC Flex
UKNC, DVK
[/pane]
[pane title="Electronic Synthesizers"]
Akai
E-mu ESI-32
Ensoniq
General Music (GEM)
Korg
Kurzweil
Roland
Sequential Circuits Prophet 3000
Yamaha[/pane]
[pane title="Embedded & Industrial"]
KUKA
[/pane]
[/accordion]
CA-PSU Amiga A500, A500 Plus, A600, A1200
CA-PSU Amiga A500, A500 Plus, A600, A1200 (CA-PSU stands for Compact Amiga Power Supply Unit), where "compact" designates the three target computers A500, A600 and A1200. It is the first power supply on the market that fully complies with the original Commodore specifications, introducing cable drop compensation for best regulation that even settles the voltage drop in the input filter of the target computers. This means that the voltage on the main 5V rail will never deviate more then 0.9%, measured inside the computer - no matter if the computer is in vanilla configuration or heavily expanded. Conventional power supplies will either supply too-high voltage to a vanilla machine, or too-low voltage to an expanded machine, causing malfunction or even defects. This cannot happen with our cable drop compensation technology.
Technical data in short:
- 5V, 5A, ripple/noise 50mV max. (typically 30mV)
- Overload on 5V tolerated up to 8A for 30 seconds
- 5V load regulation <0.6% typical, max. 0.9% under overload condition
- 12V up to 4A
- -12V, 0.1A
- Modern, high-efficiency DC-DC converter technology
- Total output power up to 60W
- Fanless, silent, extremely low heat
- Central Europe
- United Kingdom
- Australia
- USA
Elbox Mediator PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ busboard is designed to enable the expansion of towered Amiga 1200 with a wide range of high-performance, low-cost PCI cards.
New firmware embedded in CPLDs of MEDIATOR 1200 TX allows significant speed-up of graphic card operations when hardware 2D and 3D acceleration is used in single-processor systems (68k or PPC).
Features:
- 6 PCI slots (PCI 2.2 compatible)
- Power Management Interface
- 66/33MHz PCI clock (transfer rate up to 264MB/s)
- 32-bit PCI datapath
- 4GB PCI memory space
- Busmastering/DMA in all PCI slots
- SDRAM/SGRAM of PCI gfx card as a fast DMA buffer
- Interrupt controller (4 lines to each PCI card)
- AT and ATX PSU connectors
- Compatibility with 68030/040/060 and PPC turbo cards
- Fits in any A1200 in D-BOX, E/BOX (Power, Winner), EZ-Z4 and Infinitiv tower
Software:
- 2D graphic drivers for: Radeon 9200, Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee,
- S3 Virge and S3 Virge DX PCI graphic cards
- Warp 3D drivers working with Voodoo5, Voodoo4 and Voodoo3 graphic cards
- TV tuner drivers for: most of available PCI TV tuners (over 100 models supported)
- AHI sound drivers for: Sound Blaster 4.1 Digital, Sound Blaster 128 and
- ForteMedia FM801-based sound cards (e.g. Terratec 512i Digital)
- USB drivers for the Poseidon stack for: Spider and Spider II USB 2.0 cards
- Network Sana-2 drivers for: Fast Ethernet 100Mbps PCI cards
- Network Sana-2 drivers for: Ethernet 10Mbps PCI cards
Current info about supported PCI cards is available in the Mediator Driver Guide.
Package contents:
- Mediator PCI 1200 TX black busboard
- Mediator Multimedia CD
- User's Manual
We can also supply the Elbox BlackBOX 1200 Tower case
A1200 FPU Upgrade (Onboard)
A1200 FPU upgrade (onboard) which includes socket, FPU and installation.
What does the modification do?
This FPU modification adds a real FPU to the A1200 motherboard, there has always been a place (U0) for an onboard FPU but it was never added. This is a perfect compliment for a stock A1200 or one with an accelerator without an FPU option, for example The TF1230 or any standard ram upgrade like the 11Mb Fast Ram upgrade. However there are a couple of limitations of adding an onboard FPU.- The FPU will be using the CPU clock which is at 14Mhz, which means the FPU will be running at 14Mhz
- The FPU will be disabled if you use a 040 or 060 accelerator, for example TF1260. This is because both the 040 and 060 processors do not acknowledge external FPUs as you can get those processors with built in FPUs.
A1200 Case LED Board
A1200 Case LED board with power LED (green), floppy LED (yellow) and HDD LED (yellow). A simple replacement for your current Amiga 1200 LED board if its faulty or a great addition for the new A1200.net cases.